Polishing machine

OTEC ECO1X18

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: Iasdpfx Adox H Tade Ret - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Iaedpfx Asqpdkcsd Rst - Capacity: about 7,500 - 15,000 dowels/hour

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be set up Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4,650 x 2,400 x 3,100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 controller - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3,500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Isdpfx Adeg Saqvj Rsat Gripper change cabinet Belt conveyor Interoll Automation GmbH - Total length approx. 2,000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to customize every detail as shown in the video.

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Lg.No. 13439 Technical data: - Polishing wheel- grinding wheel dimension approx. 300 x 40 x 76 mm - grinding belt dimension approx. 3500 x 50 mm - contact wheel dimension 400 x 50 mm - drive speed 1450 rpm - drive 400 V / 1,8 kW Iaedpfxok D Ewge Ad Rst - space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 1969, 1 x Centrifuge Steimel S 3 Year of manufacture: 1969 with conical basket and lockable lid. The machine is in technically flawless condition. Technical data: Max. load: 50 kg / 20 l Speed: 1,000 rpm Iodpsu Ttrvjfx Ad Roat The machine can be inspected under power.

Condition: good (used), White Iedpfoudvg Rox Ad Rsat Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Iasdpeg D Rfmefx Ad Rot

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Iajdpfxsfbgz Ie Ad Rst type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: R95-0839, Extrude Hone Vector Precision Deburring and Polishing System, Model 8/6. Capable of polishing large extrusion and forming dies, deburring and polishing precision parts in small to medium batch quantities. Worktable height 46.5", column spacing 28". Maximum opening 22.75", minimum opening 2.75". Media tube diameter 8". Media tube displacement 628.3". Media extrusion pressure 197-844 psi. Media delivery rate 0-2.53 cubic inches per minute. Hydraulic camping force 22.0-29.4 tons. Includes a 5 hp power pack, and an operator panel SPECIFICATIONS: Year: 1995 Serial No. R95-0839 Media Cylinder Diameter…………8″ Media Cylinder Capacity…………628.3 cu.in. Hydraulic Ram Diameter…………6″ Iaodpfx Adjryv Ixe Ret Hydraulic Clamping Force…………29.4 Ton Opening Between Tooling Plates – Maximum…………10″ Worktable Height…………46-1/2″ Distance Between Columns…………24″ Compressed Air Required…………58 PSI Media Extrusion Pressure…………197 – 844 PSI Media Delivery Rate…………0 – 2,053 cu.in./min. Electrics…………230-460V/3Ph/60Hz Dimensions – Approximate Overall when Closed…………41″(L) x 51″(W) x 106″(H) Weight – Approximate…………5,000 Lbs. EQUIPPED WITH: Allen Bradley Programmable Logic Controller (PLC) 20 HP Hydraulic Power Pack Unit Media Displacement & Cycle Timer Counters

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Iedjvr Tbajpfx Ad Roat Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice