Hail Ab

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Options: Chip conveyor, Z travel 1000 mm, 16-position powered turret, productivity package, bar feeder interface, robot interface, memory extension, overload detection, high-pressure coolant, 3-color signal lamp, tooling Lhsdsymlkaspfx Ab Tsc

Condition: good (used), Year of construction: 2004, Opportunity to buy this HARTFORD Omnis vertical machining center. In good working condition. Cooling through the spindle. Lhedpfoymli Nsx Ab Tjc Immediately available for delivery. Cnc control Heidenhain TNC410 Axis X 1020 mm Axis Y 500 mm Axis Z 500 mm Table length 1200 mm Table width 470 mm Number of tool pockets 20 Spindle taper BT 40 Max. spindle speed 6000 rpm Cooling through spindle yes

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Ledpfx Abjymli Ae Tehc Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: like new (used), functionality: fully functional, For use on milling machines with easy mounting on the machine table. Adjustable miter stop 30–150°. Sliding carriage moves smoothly on ball bearings. Lhsdoymlivjpfx Ab Tsc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Lhsdoymliispfx Ab Tsc Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, mileage: 862,000 km, first registration: 06/2018, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, Three-axle truck with swap body system, wheelbase 4800 mm, liftable/steerable third axle, automatic transmission, retarder, 862,000 km, air conditioning, full air suspension. Ledpfx Aeymlicob Tshc Price indicated above plus 22% VAT and title transfer fee.

Condition: used, Year of construction: 2007, CNC lathe, 2 axes, Doosan Puma 300LC year 2007 Fanuc 21iTB with Manual Guide - Z-axis: 1330 mm Lhedpfx Aboymlh Ss Tsc - X-axis: 282 mm turning diameter: 400 mm turning length: 1280 mm Samchully 12 inch (315 mm) chuck spindle bore: 103 mm turret for 10 tools tailstock tool probe - chip conveyor - coolant tank with pump - machine documentation

Condition: good (used), mileage: 728,681 km, power: 375 kW (509.86 HP), first registration: 03/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 5,990 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: AdBlue, central locking, cruise control, electric window regulation, onboard computer, parking air conditioner, parking heater, spoiler, = Additional options and accessories = - Rear work lights - Front work lights - Heated mirrors - Roof spoiler - Windshield - Cabin - Sleeper cab - Sideskirts - Auxiliary heater (parking heater) - Warm-up automatic system = Remarks = Volvo FH13.500 Globetrotter 4x2 - I parkcool - Full air - Custom interior - Full spoiler - Fridge Model year: 05-03-2018 Mileage: 728,681 km VIN: YV2RT40A5JB857652 Registration: 01-BRH-8 Clean Dutch truck I parkcool night climate control Full air suspension Custom interior Full spoiler kit Light bar Etc. = Further information = Technical data Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Gearbox: I-Shift, 12-speed, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 7,100 kg; Left tire tread: 60%; Right tire tread: 60% Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40% Weights Unladen weight: 7,969 kg Payload: 10,631 kg Gross vehicle weight: 18,600 kg Condition Technical condition: good Visual condition: good Lsdjymlhxopfx Ab Tohc Identification Registration number: 01-BRH-8 Further information Please contact VAEX The Truck Traders for more information.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. Lhodpfxjymlhro Ab Tec programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: used, functionality: fully functional, BOTTENE crosscut saw – after technical inspection, ready for operation Specification: • Condition – used, after a comprehensive inspection • Manufacturer – BOTTENE • Blade diameter – 350 mm • Saw motor – 1.5 kW • Maximum dimensions of cut element at 90°: 110 x 200 mm (height x width) • Blade guards to ensure operator safety • Table size: 70 x 55 cm • Manual blade raising/lowering • Overall dimensions without tables: 90 x 80 x 105 cm (L x W x H) Additional information: • Machine is in good technical condition, ready for immediate use • The photos show the actual condition of the item for sale • Possibility to connect and test the machine on site Lhjdpfsymlhlsx Ab Tjc • The auction price does not include VAT and transport costs Financing and transport: • We organize transport via our MDD fleet, courier companies, or external carriers • We provide financial support in the form of leasing or lease loans

Condition: used, mileage: 394,815 km, power: 162 kW (220.26 HP), first registration: 05/2018, fuel type: diesel, empty load weight: 6,620 kg, maximum load weight: 5,370 kg, overall weight: 11,990 kg, tire size: 315/80R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: other, gearing type: other, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,410 mm, front tire size: 315/80R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, tail-lift, Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this price is independent of the place of use. Yourtrucks GmbH compiles the contents of this website with the utmost care and ensures they are regularly updated. The information provided should be considered non-binding general information and does not replace detailed, individual consultation when making a purchase decision. Only the terms contained in the purchase contract are binding. Subject to change, errors, typographical mistakes, and prior sale. Our general terms and conditions apply exclusively. Lhodpfjymlhfex Ab Toc Languages - We speak English - Nous parlons français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Year of construction: 2011, MAZAK - VCS430A - 2011 - system MAZATROL Smart - from low series manufacturing shop - 4th axis Kitagawa NC Rotary table MR200 - spindle taper ISO40 - spindle 12000 RPM - spindle 18,5 kW  - table 900(X) x430(Y)  - moves 560(X) x 430(Y) x 510(Z) mm - rapid move 42 m/ Min  - Productivity Packages - 15 bar spindle through cooling Ljdpeymlgzefx Ab Tjhc - in January 2026: Power ON: 16251Hrs / Auto Cutting: 15231Hrs - to be sold soonest in May 2026, when a new bigger MC arrives

Condition: new, Timesavers Series 12-300-WRBW Vacuum table Station 1: Pre-grinding, removal of burrs and splashes Station 2: Edge rounding using rotating deburring brush Station 3: Surface finishing with Scotchband Lhsdpsymlguofx Ab Tjc

Condition: good (used), functionality: fully functional, mileage: 667,400 km, power: 160 kW (217.54 HP), first registration: 08/2010, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 100 l, brakes: engine braking, color: white, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, loading space length: 7,180 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, fog lights, onboard computer, power assisted steering, seat heater, tachograph, traction control, trailer coupling, truck registration, Mercedes-Benz Atego 822 L Flatbed 7.18m Engine: R4, turbocharged, 160 kW (218 HP), 2200 rpm BlueTec 5 (Euro V) 6-speed manual transmission Leaf/air suspension Air suspension on rear axle Engine brake with constant throttle Telligent brake system with ABS Air conditioning Pollen filter CD radio with Bluetooth Driver comfort suspension seat, Grammer Passenger comfort suspension seat, Grammer Main tank 100L, plastic AdBlue tank, 25L Crossmember for trailer hitch G 135 Trailer socket, 15-pin and 13-pin Tow hitch with ball head Ljdsymlgnspfx Ab Tehc Towing capacity 3,500 kg Tyres: 215/75 R17.5 / Tread depth: 1st axle 6 mm, 2nd axle 10 mm Permissible total weight: 7,490 kg Kerb weight: 4,690 kg Payload: 2,800 kg Flatbed dimensions: 7,180 x 2,480 x 500 mm

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing Lsdpjymlf Refx Ab Tjhc - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also Lhedpfeymlf Dex Ab Tec has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, LIMAB length scanner Lsdpfx Absymlfwj Tshc

Condition: used, functionality: fully functional, mileage: 364,061 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Lhodpfx Abjymlfqe Tec Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron Lhsdpfx Abeymlfko Tjc - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: excellent (used), Series 12-225-WRD Lhjdpfjymlfdex Ab Tec 1st station sanding belt for removing burrs and laser spatter 2nd station disc for light edge rounding Pass-through width 225 mm incl. TEKA extraction system

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a used baler from the manufacturer BOA, model 2040.S. 4V (6) 71.30, including conveyor belt and PET bottle crusher. The following technical data has been taken from the manufacturer’s operating manual and brochures; we do not assume any guarantee for the accuracy and completeness of this information. Manufacturer: BOA Model: 2040.S. 4V (6) 71.30 Year of manufacture: 2002 Lsdpfoymldtjx Ab Tohc Operating hours: approx. 66,568 hours (as of October 2025) Effective pump running time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Operating pressure: 280 bar Feed chute dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length variably adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Throughput rates by quality: Bulk density 20 – 30 kg/m³, throughput up to 9 t/h Bulk density 40 – 60 kg/m³, throughput up to 16 t/h Bulk density 80 – 100 kg/m³, throughput up to 21 t/h Bulk density 100 – 150 kg/m³, throughput up to 28 t/h Bale weight up to 600 kg per bale, depending on material Hydraulic oil tank volume: 800 L Transport dimensions: 10,020 x 2,060 x 3,250 mm (L x W x H) Machine weight (baler): approx. 26 t Noise level

Condition: excellent (used), Bending length: 4100 mm Press force: 240 tons Equipped with a large set of bending tools Manufacturer: Baykal Model: APHS 41240 Ledpeymldgofx Ab Tehc Power supply: 3-phase Year of manufacture: 2021 Serial number: 28635

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS SUPER HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Lhsdpsymldaofx Ab Tsc Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 90/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: ready for operation (used), Euromate MFS UltraFlex Mobile Extraction Unit Mobile Filter Welding Fume Extraction Airflow: approx. 800 – 1,500 m³/h Arm length: 4m Lhsdpfxjymlc Ne Ab Toc Pipe diameter: Ø203mm You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: refurbished (used), functionality: fully functional, grinding length: 680 mm, grinding width: 350 mm, grinding height: 300 mm, table length: 600 mm, table width: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,400 rpm, CAPACITY Max. longitudinal table travel: mm 680 Max. cross travel of grinding wheel: mm 300 Max. grinding width: mm 350 Max. grinding height with standard wheel: mm 300 TABLE Table surface dimensions: mm 600 x 300 Length of T-slots: mm 850 Lsdpfx Abjymlcve Tohc Size and center distance of the three T-slots: mm 16 x 100 Continuously variable speed: m/min 2 – 30 GRINDING WHEEL Standard dimensions (diameter x bore): mm 356 x 127 Standard width: mm 50 Max. permissible width: mm 76 Max. external diameter – upon request: mm 406 Speed with 50 Hz motor: rpm 1,400 Incremental cross feeds: mm 1 – 10 Continuously variable cross movements: m/min 0.1 – 6 Automatic vertical feeds – upon request: mm/min 0.005 – 0.05 MOTORS, three-phase AC – 50 Hz: Grinding wheel rotation, 4 poles: kW (HP) 5.5 (7.5) Hydraulic unit, 2 poles: kW 2.2 (3) Rapid vertical movements, 4 poles – upon request: kW 0.37 (0.5) Coolant unit, 2 poles: kW 0.22 (0.3) MISCELLANEOUS Overall floor dimensions, machine in operation: mm 2780 x 1240 Height from floor, standard machine: mm 1960 Machine height with raised column – upon request: mm 2110 Approx. net weight: kg 2,500