Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Djhxzefdkb Uor Npocg - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Functionality: fully functional, Year of construction: 2025, Double-leaf door (DFT) 2 units in stock, RAL 7043 13 units available at short notice, other RAL colors available upon request Dcshxzr Nowcyxxopeg Technical description: Interior dimensions: 7000 x 2300 x 2400 mm (L x W) Usable capacity: 38.6 m³ Empty weight: 3,000 kg Floor: 5 mm S235 Side walls: 3 mm S235 All sheets and profiles are continuously welded Double-leaf door with safety lock Warning markings according to DIN 67620 Container tested and approved according to DGUV 114-110 Floor-side wall connection: 45° Hook diameter: 50 mm, S 355 Hook height: 1,570 mm Top frame: round tube: 89 x 6.3 mm Net hooks All moving parts can be greased Steel rollers: 159 x 6.3, length: 300 mm Zinc phosphate primer inside and out, painted with synthetic resin varnish (80-100 μ) on the outside Permissible total weight: 15,000 kg

Year of construction: 2009, Condition: excellent (used), machine/vehicle number: WPTres5, Steel Steel construction Bridge crane Gantry crane Crane canopy Crane runway Crane Indoor crane Dimensions approx. 9.1 x 7m Payload / lifting capacity 500KG 1 overhead crane with 500KG payload - track 5.58m Technical data of the system: Crane runway consisting of HEA200 / IPE300 girders free-standing with bracing 80x80mm square tube Total crane height 4.95m, top running rails 4.5m Bottom running rails 4.3m, bottom bridge 4.55m, hook height 4m Track width 5.58m, total width 5.7m External dimensions of steel structure (space required) 9.1 x 6m Support stand variable Dcohorxb Dxjxzr Npsg System is supplied complete: Steel construction made of IPE300 + HEA240 runway rails + power supply system 1x overhead crane 500Kg payload incl. chain hoist with trolley drive and travel drive (screws for the steel structure are missing) The first pictures (example photo) show a similar, identical crane. Crane is disassembled and immediately available Item location is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup by appointment only

Condition: used, We offer used workshop containers that can also be used as office containers. Size: 8x 2.45x 3.20m With electric awning, air conditioning, heating, lighting, toilet, kitchen, etc. Location: Dunkerque, France. You can tell us your postcode so that we can provide you with a free, non-binding quote for containers including delivery and, if necessary, unloading from the truck. We look forward to hearing from you! MAGITU GmbH Dshxzr Njv Sr Irepecg

Condition: like new (used), Used stainless steel transport container / IBC Last use: food Item number: 10722 Volume: 750L Type: Standing in stainless steel rack Material: 1.4404 / AISI316L Type: Single wall Dome cover Ø 400mm Empty weight: 196 Kg Working pressure according to nameplate: ATM Tank dimension: Total height: 1545mm total width: 1000mm Dshxzrsinig Ae Npecg Total length: 1200mm Distance drain to floor: 450mm Materials: Inside: 1.4404 / AISI 316 Outside: 1.4404 / AISI 316 Facilities: Nameplate: Yes Outlet diameter:250mm Outlet valve: Disc tap

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Dohxzr Nemhh Dhopecg According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Functionality: fully functional, Year of construction: 2025, Leasing/hire purchase available. Steel lids 6 units directly from stock, RAL 7043 10 units available at short notice, other RAL colors upon request Technical description: Dimensions: 3740 x 1720 x 1500 mm Base: 5 mm S235 Sides: 3 mm S235 Steel lid, 1.5 mm S235, vertically adjustable Torsion bar spring All sheets and profiles welded throughout Container tested and approved according to DGUV Rule 114-010 Corner reinforcements Triple tilting bearing on both sides (45 mm diameter bolt) Stacking strip L-profile Safety strip Frame edges U80x50x4 Zinc phosphate primer inside and out, painted with synthetic resin paint (80-100 μ) on the outside Empty weight: 784 kg Gross vehicle weight: 10,000 kg Dohswcyv Rjxzr Npocg

Year of construction: 2013, Condition: used, machine/vehicle number: SB207, Demag / Erikkila crane canopy Crane runway dimensions approx. 10.5x8m Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of 200mm Erikkila rails Running rails 10.5m, bridges 8m System is supplied complete: Rails, rail joiners, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag 500KG PK chain hoist older, lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Dcshxzr Nerwi Shspeg Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: good (used), manhole: 400, total height: 1,640 mm, total length: 1,230 mm, total width: 1,030 mm, Used stainless steel container / transport container / IBC Last use: Chemicals Dehxzr Neq Rc H Nopocg Item number: 10756 Volume: 1000 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.1 bar Tank dimensions: Total width: 1030mm Total length: 1230mm Total height: 1640mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: Yes Outlet diameter: 50mm Distance drain to floor: 240mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Dcjhxzrefdkbhe Npjg - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2009, Condition: excellent (used), machine/vehicle number: WPTres6, Steel Steel construction Bridge crane Gantry crane Crane canopy Crane runway Crane Indoor crane Dimensions approx. 16.5 x 7.6m Payload / lifting capacity 2x 500KG Dcjhxzr Njrxb D Aopjg 2x bridge crane with 500KG payload each - track 7.47m Technical data of the system: Crane runway consisting of HEA200 / IPE300 girders free-standing with bracing 80x80mm square tube Total crane height 4.95m, top running rails 4.5m bottom running rails 4.3m, bottom bridge 4.55m, hook height 4m Track width 7.47m, total width 7.6m External dimensions of steel structure (space required) 16.5 x 7.6m Column spacing 5.75 + 5 + 5.75m (lengths of running rails) System is supplied complete: Steel structure made of IPE300 + HEA240 guide rails + power supply 2 bridges each 500Kg payload incl. chain hoists with trolley drive and travel drive (screws for steel construction are missing) The first pictures (example photo) show a similar, identical crane. Crane is disassembled and immediately available Item location is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup by appointment only

Condition: like new (used), Used stainless steel container / transport container / IBC Item number: 10654 Last use: Pharma Number of pieces: 97 Volume: 785 liters Type: Standing in stainless steel stacking rack Material (wetted): 1.4404 / AISI316 Height of feet: 930mm Manhole 400mm Empty weight: 178 Kg Construction: Single wall Working pressure according to nameplate: ATM Dshsig Huzexzr Npecg Tank dimension: Total width: 990mm Total length: 1190mm Total height: 1545mm Materials: Interior: 1.4404 / AISI316 Outer parts: 1.4301 / AISI 304 Facilities: Nameplate: No Diameter blind nut: DN 80 Diameter outlet: DN 100 DIN11851 Spigot at the top: DN 50

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Dcjhomhhyaexzr Npsg - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2009, Condition: excellent (used), machine/vehicle number: WPTres125+500, Steel gantry crane Bridge crane Crane canopy Crane runway Crane Indoor crane Technical data of the system: Payload / lifting capacity 125KG 1x overhead crane with 125KG payload - track width 7.47m, total width 7.6m (design is approved up to 500Kg) incl. chain hoists with trolley drive and travel drive superstructure height approx. 45cm + 40cm chain hoist Crane is dismantled and immediately available An identical crane with 7m span and 500Kg payload is also available, please inquire. Dcehxerxb N Iszr Npeg Item location is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup by appointment only

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel facilities: Dehsd Sw Dfexzr Npecg Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments Dcohxzremhhx Io Npsg - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Used stainless steel container/transport container/IBC Last use: Chemistry Item number: 10315 Tank cleaned! Volume: 500 litres Type: Standing in galvanized stacking rack Material (media-touched): 1,4301/AISI304 Execution: One-wailed Soil: Vaulted Usehigh: Vaulted Operating print according to type plate: + 0.2 bar Dimensions containers: Dehxzjd I S Uljr Npecg Total width: 1200mm Total length: 1000mm Total height: 1000mm Materials: Inside: 1,4301/AISI 304 Exterior parts: Galvanized steel Facilities: Type plate: Yes Diameter spout: 50mm Spout Type: DN50 Crash valve: Yes

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg Dcohxzr Nsd Tbbdjpsg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), manhole: 400, total height: 1,670 mm, total length: 1,200 mm, total width: 1,100 mm, Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10757 Volume: 1000 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.33 bar Empty weight: 222Kg Tank dimensions: Total width: 1100mm Total length: 1200mm Total height: 1670mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Dcohxzreq Rc Ers Npsg Equipment: Type plate: Yes Spout diameter: 50mm Distance drain to floor: 230mm

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone Djhsguk Dkoxzr Npocg - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10754 Volume: 1000 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.27 bar Tank dimensions: Total width: 1020mm Total length: 1200mm Total height: 1550mm materials: Interior: 1.4301 / AISI 304 Outer parts: Galvanized steel Equipment: Dohxjrdgkvezr Npecg Type plate: Yes Spout diameter: 72mm Outlet valve: Disc tap Distance drain to floor: 150mm

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Djhxzr Nomhh Anopscg The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), manhole: 40, total height: 1,100 mm, total length: 1,200 mm, total width: 1,100 mm, water tank capacity: 500 l, wall thickness: 15 mm, Equipment: type plate available, Used stainless steel container / transport container / IBC Item number: 10763 Dcohxzrjp S R Tye Npjg Type: standing in galvanized stacking frame Material (wetted): 1.4301 / AISI304 Design: Single-walled Working pressure according to type plate: 0,33 Bar Materials: Inside: 1.4301 / AISI 304 Outer parts: Galvanized steel Facilities: Nameplate: yes Diameter spout: 45mm Outlet valve: valve Distance drain to floor: 230mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Dcohxzreguk Dve Npjg - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Dcohxzrsmhh Dzo Npeg - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.