Used Forging Manipulator for sale (508)

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Chsdpfoy Hf Itox Aicjd Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Chedpfxsq U Sa So Aicod Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Codpjq U R T Nofx Aicshd Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: excellent (used), Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 500 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 500 kg LOAD CAPACITY (KG) 500 kg STROKE min. 600 mm STROKE max. 1400 mm ARM LENGTH (MM) 1000 mm CLAMP PLATE 760 mm Self-weight 900 kg BENDING MOMENT ARM NM 1100 Chjdpfxe Ah Smxj Aicsd LIFTING DRIVE hydraulic All machines come with documentation and operating instructions.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Swivel range 360° Manipulator is disassembled and immediately available. Chodpfx Aiszv Et Esced Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Codpfx Aezv E Dwjicshd Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Chodpfozvqwiox Aiced Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Cjdpezv Hw Ejfx Aicohd Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: Chedpfxjzv Hxpj Aiced IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- Cedozfwt Ajpfx Aicohd ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 Kg LOAD CAPACITY (KG) 1000 / 2000 Kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic Chjdpfxjzubw Re Aiced SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions.

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Csdpfx Asy Ud N Soicjhd Video showing the machine in operation available!

Condition: excellent (used), functionality: fully functional, pressing force: 450 t, stroke length: 300 mm, table width: 850 mm, table length: 630 mm, distance table to ram: 860 mm, total length: 3,100 mm, total width: 3,100 mm, total height: 4,300 mm, overall weight: 20,000 kg, Equipment: documentation/manual, Ficep PFM 215 screw press, screw diameter 215 mm, 450-ton capacity. In very good condition, as shown in the photos and technical specifications attached. The press is stored in our workshops in Peschadoires, France. Technical documentation will be provided with the machine. Price upon request. Cedpfj Ahzbtsx Aicjhd

Condition: excellent (used), functionality: fully functional, overall weight: 65,000 kg, total height: 4,915 mm, space requirement height: 3,530 mm, TECHNICAL SPECIFICATIONS Striking force: 6300 kg per meter Stroke: 560 mm Distance between slides: 650 mm Csdpfs Ah Idljx Aicohd Striking rate: 115 strokes per minute Used equipment, technical documentation included. Attached you will find photos of the hammer and a technical data sheet. Price available upon request.

Condition: excellent (used), functionality: fully functional, overall weight: 16,000 kg, total height: 3,570 mm, space requirement height: 2,900 mm, BANNING GOA 1250 pneumatic drop forging hammer in perfect condition. Striking force: 1600 kg per meter Chedps Ah Ibxefx Aiced Stroke: 440 mm Distance between slides: 450 mm Minimum die height: 220 mm Maximum weight of the upper die: 250 kg Striking rate: 140 strokes per minute Used equipment, technical documentation included. Attached you will find photos of the hammer and a technical data sheet. Price upon request.

Condition: used, power: 55.16 kW (75.00 HP), pressing force: 1,300 t, stroke length: 254 mm, table width: 890 mm, table length: 1,041 mm, distance table to ram: 590 mm, total length: 3,277 mm, total width: 2,970 mm, total height: 4,331 mm, overall weight: 59,000 kg, Equipment: documentation/manual, The press is currently available for inspection at our workshop, in disassembled condition. We have machined all the bronze bushings, bearings, and the slide (see attached photos). The press is in very good mechanical condition. We have a complete technical file that will be provided with the machine. You will find the photos of the press and the technical data sheet attached. Csdpfxo Ahxaij Aicjhd Price upon request.

Condition: excellent (used), Year of construction: 1988, machine/vehicle number: 101067003, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 900 t, stroke length: 450 mm, table width: 750 mm, table length: 580 mm, distance table to ram: 450 mm, clearance between the columns: 640 mm, total length: 3,100 mm, total width: 3,200 mm, total height: 5,070 mm, overall weight: 25,500 kg, Equipment: documentation/manual, Dellavia screw press, screw diameter 280 mm, rated capacity 900 tons, in perfect condition. The machine is available for immediate sale and can be viewed at our workshop in Peschadoires, France. Chodpfx As Ahy Nloicsd The technical documentation will be provided with the press. Attached you will find photos of the press and the technical data sheet. Price upon request.

Condition: excellent (used), machine/vehicle number: 6835, power: 120 kW (163.15 HP), pressing force: 1,600 t, stroke length: 600 mm, table width: 1,250 mm, table length: 900 mm, distance table to ram: 1,600 mm, total length: 4,270 mm, total height: 7,760 mm, overall weight: 96,000 kg, Equipment: documentation/manual, 1600-ton screw press, Hasenclever FPRN 400 The press is complete and in very good condition. This machine was used to produce aircraft engine components at Rolls Royce. Codpfx Ais Ah H Ugecjhd The press is complete and is offered with its electrical cabinet. Attached you will find photos of the press, as well as a technical data sheet. Price upon request.

Condition: used, Year of construction: 1951, Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible. Chjdpfx Aez R A Iueiced

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 49834, TECHNICAL SPECIFICATIONS: Segment diameter: 560 mm Usable width of the rollers: center section 630 mm, outer section 270 mm Length of the rollers: center section 870 mm, outer section 1340 mm Codpfx Aio Ahzbaecehd Roller adjustment: 20 mm Roller speed: 52 rpm Maximum rolling thickness: 25 mm Motor power: 40 hp Motor speed: 1500 rpm Please find attached photos of the rolling mill as well as the technical data sheet. Price upon request.

Condition: used, overall weight: 375 kg, Used handling manipulator / articulated reaction arm from Atlas Copco. The system is explicitly not classified as a pillar-mounted swivel crane. Technical data regarding type, year of manufacture, load capacity, reach, electrical specifications, and drive are not confirmed in the available data. Cheds Agxf Sjpfx Aicsd The transport dimensions are approximately 2,500 x 1,200 x 800 mm, with a gross weight of 375 kg. Condition: used, stored disassembled.

Condition: excellent (used), functionality: fully functional, arm lifting capacity 60 kg, length 410 cm; base length 350 cm; CE marking; year 2001 Chedo Af Rffjpfx Aicsd

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Codpoztutvjfx Aicjhd Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Chjdpfx Aiezxd E Sjced Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Csdpozypd Nofx Aicehd Ram weight: 750 kg