Condition: refurbished (used), Year of construction: 2006, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Technical data Cross sealing stamp: 750 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Min. product width: 80 mm Dsbvmoufh Amoq Uajkl Passage height: 300 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: good (used), Year of construction: 2005, Water draining. Ready for use immediately for apples Brand Staas Belgium has a size for immersion tank and elevator length 5 meters wide, 2 meters the dryer is length 2.20 meters and width 1 meter everything in Nieroster Dkobvmq Ujhigmmjael

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: three-phase, total height: 1,700 mm, total width: 3,400 mm, total length: 2,300 mm, overall weight: 2,400 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, High quality, state of the art electronics, including servo motors, 15'' control unit, drivers, etc. of the German renowned brand LENZE. Other options of electronics can be installed per client request. BOXmaker MULTI 2400S - manual setup, multi-production CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm width x 7000mm length MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller 2m/s Segmented Slotting knives x3 (multiproduction) Dkebvmjfbl Hasq Uasl Creasing wheels (longitudinal creasing) x4 Circular knives (longitudinal cutting) x2 Scalpel knives (removing excess cardboard longitudinally - glue flap) x2 Hand Holder Tool (making holes, die cut) Crosscut Tool Gluing Unit (optional) Flexo Printing Unit (optional) 12 month company warranty, training for operators, support for servicing and spare parts. Lead time 150 days.

Condition: new, Year of construction: 2024, Functionality: fully functional, Labeling system for round and square canisters Stainless steel frame Dkobvmeu Ia E Ijq Uael 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Year of construction: 2000, Condition: used, machine/vehicle number: 001170, SECOND-HAND SEMICIRCULAR ROLLER CONVEYOR OMEF - CE RULES - SN 001170 Dkobvmqjrnkmle Uael - Year 2000

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Mosca ROM P4 strapping machine, 500 X 400 arch, 5 mm strap, output approx. 50 strokes per minute, automatic strap threading, adjustable clamping. 6 machines available. Degressive pricing available. Dkjbvotrwumomq Uael

Condition: ready for operation (used), Year of construction: 2000, Can seamer with single lane infeed with a scroll. lid is applied and s approx. 2.2 m x 1.2 m x 2 m high. Doing 82 mm wide lids. Cad diameter range: 52-99 mm, Speed: up to 60 cans per minute. Dksbvor Elr Romq Uael

Condition: excellent (used), 8 boxes (16 rolls, 10,000 labels each) Labels for label printer, Logopak, 170x75, - used - : Price for complete purchase: 150.-€ (net). Manufacturer: Logopak Type: 170x75 Labelrolls: 2 per carton Labels on Roll: 10.000 pieces 20.000 labels per carton Condition: very good Available: immediately Dksbvmq Ujunvggsajl Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm Dkobvmq Uefivfysaol MINIMUM BOARD SIZE: 300mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Warranty 12 months, provided training and support for services and parts.

Condition: good (used), Year of construction: 2015, Robust device for easy strapping of your pallets. For PP and PET strap with core of 200mm Djbvehh Ihremq Uaekl Maximum tension of 70Kg Minimum pallet height 550mm. Power supply 220V mono

Condition: good (used), Offer consisting of: Smipack SL56, hood shrinking machine, clean, well-kept condition, max. Format: 56cm x 43cm, Dkebvmqst Rtf So Uasl

Year of construction: 2014, Condition: good (used), Dimensions of the sealing frame (LxW) 550 x 450 mm Max. dimensions of the packaged product (LxWxH) 500 x 350 x 120 mm Min. dimensions of the packaged product (LxWxH) 50 x 50 x 20 mm Dsbeq Ukidjvmq Uajkl Max. product weight 12 kg Productivity 35 packs/min. Power supply 400 V. 3 phases + N 50 Hz (others in options) Installed power 16.5 kW Roll width 600 mm Roll width ☑ The speed of the feeding and receiving belt is regulated by the frequency converter ☑ Adjusting the feeder speed and operating temperature in the tunnel ☑ Adjustment of width and height of various products ☑ Microprocessor control board ☑

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, type of input current: AC, conveyor belt width: 5 mm, input voltage: 230 V, warranty duration: 6 months, power: 3.7 kW (5.03 HP), Reconditioned Mosca RO-M-P4 strapping machine in perfect condition, 5mm PP strap, 230Volts, automatic strap threading and ejection, 50cycles/minute. Debvmeupi D Ioq Uaskl

Condition: good (used), Year of construction: 2011, Audion 520 MV-2 Welding Machine Desktop Power Sealer Packaging Machines - second-hand -: Dkobvmqoukiwqj Uasl Price ex location: 3.000.-€ (net)! Stainless steel vacuum sealer for vacuuming and/or gas flushing of flexible plastic packaging. Manufacturer: Audion Type: 520 MV-2 Year of manufacture: 2011 230V, 10 Amp, 850 Watt Dimensions: 590x232x487 mm Venturi pump: 11,3m³/h Welded seam (LxW): 520 x 5 mm Digital control panel Multi-cycle Compressed air: >6 bar Stainless steel design gas flushing device Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: three-phase, total height: 3,100 mm, total width: 7,400 mm, total length: 11,000 mm, overall weight: 13,000 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,700 mm, Equipment: documentation/manual, BOXmaker ULTRA - PVF CAPACITY: up to 1600 boxes per hour PULLER SPEED: up to 3m/s MACHINE DIMENSIONS: 7400mm x 11000mm x 3100mm INSTALLED POWER: 16.5 kW CARDBOARD TYPE: single, double, and triple wall up to 14mm and 1400GSM MAXIMUM BOARD SIZE: 2400mm x 3000mm, stack height 1100mm MINIMUM BOARD SIZE: 800mm width x 1000mm length WIDTH OF SLOT: 8mm PVF (platform vacuum feeder) - 3m or 6m Modular – can be added to BOXmaker ULTRA at later date Vacuum fingers - ejectors, mini vacuum producers Platform capacity 1400kg of active load Slight correction of position of the cardboard sheet PVS (platform vacuum stacker) - 3m or 6m optional module, can be added in later date. Dsbvsd Rzqajmq Uaekl Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels (longitudinal creasing) x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Slotting Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades (longitudinal cutting) x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing unit x 1 - The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models. FREE MODE - make custom boxes. 3000 box memory. 12 month warranty, provided training and support for services and parts.

Condition: excellent (used), Automatic box closer with infeed table. Manually feeds closed boxes, centers the box and automatically detects the box height. Boxes can be closed in any size. Boxes are taped at the top and bottom. Showroom model in new condition. Debvmqovmgd Ds Uaskl

Condition: excellent (used), Pallet wrapper, stretch wrapper for pallets, - second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust machine! Type HAD 1500 Completely overhauled by the manufacturer!!! Equipment of the machine: The machine is a standard version of our machine type HAD 1500 with a turntable diameter of 1500mm, with 2200mm pallet height and a load of max. 2000kg (year of construction 2002/ No.145) Electrical control has been completely renewed (frequency converter) Dksbvmq Ujuru Ecjasl New bearings for film carriage Normal / cross winding Photocell (on/off switch) Magnetic powder brake newly powder-coated Positioning of the turntable Indirect pre-stretching Banding option New turntable bearings Condition: very good Available: immediately Location: 91177 Thalmässing

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: three-phase, total height: 17,000 mm, total width: 34,000 mm, total length: 23,000 mm, overall weight: 2,600 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, High quality, state of the art electronics, including servo motors, 15'' control unit. BOXmaker PRO 2400S - automatic setup (set-up time up to 30 seconds) CAPACITY: up to 1200 boxes per hour (FEFCO 200) MACHINE DIMMENSIONS: 3400mm x 2300mm x 1700mm CARDBOARD TYPE: single, double, and triple wall up to 10mm and 1000GSM MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 800mm length Servo puller: 2m/s Slotting knives x2 Servo powered slotting subassembly (30% faster cycle) Dksbvsd Sap Tjmq Uael Creasing wheels with integrated Scalpels (longitudinal creasing and cutting off glue flaps) x2 Circular knives (removing excess cardboard longitudinally - window cut out) x2 Hand Holder Tool (making holes, die cut) Crosscutting Tool Flexo printing module - one color, 300 x 470mm (optional) Gluing module - cold glue system (optional)

Condition: like new (used), Fully automatic box closer with flap closer for placing in automatic line. Automatic centering station AS24 for SM44/4 Box closer for small format automatically detects the height and width of the box, then closes the flaps and seals them at the top and bottom with tape. Djbvmq Usvmf Uhjaekl Device in good condition. Completely checked.

Condition: good (used), Year of construction: 2006, Site price: 2 x carton erectors, Bedo, VA 1295 - second-hand - : Price ex site: only 9.500.-€ (net), incl. loading! Manufacturer: Bedo Type: VA 1295 Year of construction: 2006 Machine number: 1295.1.6691 and 1295.1.6690 With two magazines 400V/3PN/ 50Hz Control voltage: 24V 20 A Compressed air: 5- 7 bar with Nordson ProBlue 4 adhesive melter 4 liter hot melt adhesive Device dimensions: approx. length: approx. 4.70m or 5.25m with Plexiglas, width incl. control cabinet 1.60m, height approx. 2.27m without the lifting cylinder Condition: good Available: immediately Location: CZ Bor More photos on request! Manufacturer text: Series 12 up to 40 cartons per minute Folding boxes according to FEFCO 0201, 0200, 0209 and others All types of corrugated cardboard carton closure by means of hot glue, self-adhesive tape or wet adhesive tape Small to very large carton formats One or two carton magazines fully motorized operation no format parts Dobveuyx Ryemq Uaokl

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Pallet wrapper for both Euro and block pallets Plateau diameter 1650mm Dkjbvmovmfcrjq Uasl Wrapping height up to 2m20 With pre-stretch system and ramp

Condition: good (used), Year of construction: 2006, Site price: 2 x automatic carton sealer / carton sealer with wet glue strips, Bedo, VA 3821 - second-hand - : Dobvmeuyx Dajq Uaekl Price per unit ex site: only 4.950.-€ (net), incl. loading! Manufacturer: Bedo Type: VA 3821 Year of construction: 2006 Machine number: 3821.1.6695 and 3821.1.6694 400V/3PN/ 50Hz Control voltage: 24V 14,8 A Compressed air: 5- 7 bar Appliance dimensions: approx. length: approx. 3.05m or 5.25m with Plexiglas, width incl. switch cabinet 1.70m, height approx. 2.30m Condition: good Available: immediately Location: CZ Bor Manufacturer text: Carton sealer series 3 and 38 - Impressive capacity of up to 40 cartons per minute, ideal for high throughput operations. - Suitable for folding boxes according to FEFCO 0201, 0200, 0209 and others, enabling a wide range of applications. - Compatible with all common types of corrugated board, making the machines a flexible choice for a wide range of packaging materials. Versatile sealing options with adhesive tape - Various carton sealing methods, including hot glue, self-adhesive tape and wet tape, as well as combinations of these sealing media, offer flexibility for different product requirements. - The machines can handle small to large carton formats, making them a versatile solution for a wide range of products. - Motorized/pneumatic operation ensures reliable and precise sealing performance. Reliability and efficiency - The positive carton transport by lateral carriers ensures stable and safe transportation of the cartons through the machine. - The option of automatic format changeover facilitates fast product changeovers and thus contributes to increased productivity. Photos Device no.: 3821.1.6694

Condition: good (used), Table top strapping machine for PP strap Dkobvmqef Uhcgj Uajl

Condition: good (used), Year of construction: 2011, Site price: Carton erector, Mohrbach, erector 541 - second-hand - : Price per unit ex site: only 19.950.-€ (net), incl. loading! Manufacturer: Mohrbach Type: Erector 541 Year of construction: 2011 Machine number: 1112030 Dksbvmsuxq N Esq Uaol with Nordson ProBlue 4 adhesive melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 2.06m plus c. 1.36m for the magazine Condition: good Available: immediately Location: CZ Bor

Condition: good (used), Year of construction: 2011, Site price: Carton sealer, Mohrbach, closer 376- second-hand - : Price per unit ex site: only 18.950.-€ (net), incl. loading! Manufacturer: Mohrbach Type: Closer 376 Year of construction: 2011 Machine number: 1112031 with Nordson ProBlue 4 glue melter 4 liter hot melt adhesive Machine dimensions: approx. length: approx. 3.70m plus approx. 60cm for the hot melt machine, width approx. 1.60m, height: approx. 2.18m Condition: good Available: immediately Dksbvmq Ujuxqxajaol Location: CZ Bor