Used Pumps for sale (587)

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new Cgslqxzhjfupads Tst No submersible pump or submersible pump

Year of construction: 2020, Condition: new, Up to 142 m³/min and 10,600 Pa. Cast aluminum housing, mainly backward curved aluminum impellers, largely corrosion resistant. Cjloibq N Hsqxzh Tegt

Condition: excellent (used), Year of construction: 2012, Hello, Cslqxzoirt U Rjh Togt The pump comes from a compartment disassembly of a cooling system and was fully functional until disassembly. Single-stage volute casing close-coupled pump, with ratings to EN 733, with replaceable shaft sleeve and wear rings, with motor-mounted speed control system. With KSB SuPremE, a magnet-free synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on speed control system type KSB PumpDrive 2 or KSB PumpDrive 2 Eco without rotor position sensor. Mounting points according to EN 50347, enveloping dimensions according to DIN V 42673 (07-2011).

Condition: like new (used), Year of construction: 2008, operating hours: 35 h, High performance pumping equipment for heating water, irrigation, industry, power plants, water management. Only 35 BS - from average depot of a power plant. Centrifugal pump: Flowserve 202 FP-4E Speed: 1,470 rpm Delivery head: 150 m/WS Flow rate: 150 m³/h ( 2.500 l/min) Power requirement: 90,5 kW Inlet pressure: 10 bar Conveying temperature: 90° C max. Drive: 6,7 litre diesel engine Iveco N67 MNTF 42.00 power: 127 kW Water cooling Chassis: 2-axle (tandem), galvanized, with torsion bar suspension and sound-insulated weatherproof housing. Celqxzhjgyn S Aj Togt L: 6.850 mm W: 2.200 mm H: 2.400 mm weight: 6.000 kg TÜV until Feb. 2022 Operating manual with operating instructions in German language.

Condition: used, Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 72588, operating pressure: 4 bar, Screw pump based on the BrookHansen 132 kW engine, type 7-ud315sn, Bornemann pump, type HC-232-100, 4.5 bar, 498-507 m3/h. Used for pumping fuel oil at the fuel terminal. Additionally, there is also a frequency converter for this engine. Celqjvvlrroxzh Tjgt

Condition: like new (used), Hydraulic hand pumps manufacturer Lukas and enerpac larger quantity available . Piece price 100€ net Cgolqjhcxmwoxzh Tjt

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: eco-55, diesel pump - new Celjd Tc I Djqxzh Togt

Condition: excellent (used), Year of construction: 2021, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: 229404, overall weight: 50 kg, power: 2.8 kW (3.81 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 4 A, Purchased and installed. Found to be too strong so removed. It has been used a total of 10 minutes. 1250L/min Cgolqxzhsrqgauj Tjt 3 Phase Max head. 20m IP68

Condition: excellent (used), Year of construction: 2010, Hello, The pump comes from a compartment disassembly of a cooling system and was in use until the disassembly. Design Single-stage low-pressure centrifugal pump with axial suction, according to EN 733, mounted on base plate. Application Cgslqxeirwmqszh Tst Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. ƒ Applications in irrigation, building services, general industry, power plants, etc Type code Example NL 65/125-7.5-2 NL Standard pump with axial suction 65 DN for discharge flange 125 Nominal impeller diameter [mm] 7.5 Nominal motor power P2 [kW] 2 Number of poles

Condition: not inspected (used), hydraulic from fingerjoint press dimter DKV Cslqxzehtrprjh Tjgt and also applicable to other machines

Condition: good (used), Year of construction: 2007, 2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 - second-hand - : Cslqxzjuntlmoh Tsgt Price per unit ex location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of construction: 2007 Q400.00m3/h H 14.00m n 1460 1/min Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, The pump can be produced in a special design for pumping the following types of medium: Diesel/petrol Glycol up to 35%/coolant Hot water up to 140°C/alcohol Glycol up to 50% Oil up to 140°C Oil up to 200°C Applications - pump for industrial applications Cgelqxzsvb Uidjh Tet Working conditions of the pump Permissible ambient temperature: from -10 to 90°C. Maximum pump suction height: 7 meters Maximum allowable pump pressure: 10 bar. Designed for continuous operation. Maximum lift 57.5m (5.75 bar) Capacity 280l/min (16.8 m3/h) Motor Two-speed induction motor, 50 Hz (n = 2900 rpm). NM: Three-phase 230/400 V +/- 10%; 400/690 V +/- 10% from 4 to 9.2 kW Insulation class: F. IP 54 degree of protection. Constructed in accordance with: IEC 60034 We can help arrange a cost-effective shipping company or courier for you.

Condition: ready for operation (used), Pipe Pump, Screw Pump, Dickow Pumpen KG 84478 Waldkraiburg Overall Dimensions: 3800 x 720 x 720 mm Electrical Specifications: 400 V, 50 Hz, 2888 RPM, 1.28 kW Cgolqovgw Duoxzh Tet Lift Height: 15 m Rated Capacity: 10 m³/h

Condition: new, Wilo para circulation pump Cgslqsuadlmexzh Tjt

Condition: like new (used), Multistage, submersible, self-priming centrifugal pump Colqefz D Dnexzh Tjgt Type: MTR 20-19/6 A-W-A-HQQV Product no.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: ready for operation (used), Hydraulic unit was used to drive 2 hydraulic motors Celsktkg Eeqxzh Tsgt Power 45 kW Max. pressure 210 bar Tank 100 ltr. 95 l/min

Condition: used, Year of construction: 1984, / model: DVT 2.60 / year of construction: 1984 / machine number: B869272 / motor power: 2.25 kW / capacity: 60 m3/h / speed: 1420/min1 / condition: good, technically checked by us / inspection: is possible in our workshop in NL-Tilburg / delivery time: immediately Cgelqehpqiqexzh Tst

Condition: good (used), 1 piece Wilo pressure booster system Cgolevit S Hoqxzh Tjt Equipped with 4 pumps type Helix VE 1605 With pressure accumulator 400 L

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Cjlqxjvgwqhozh Togt Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Condition: good (used), KSB booster set M-CU 3/840/1 Delivery head 40 m,8m³/h Cgelqxed I Ixyszh Tjt Switch-on pressure 5.0 bar Switch-off pressure 6.3 bar Operating pressure max.11 bar 3 pumps with 1,1 KW each Dimensions LxWxH 180x55x125 cm All documents available.

Condition: like new (used), Functionality: fully functional, machine/vehicle number: 3514178/6526450, overall weight: 8 kg, power: 0.55 kW (0.75 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,870 rpm, protection type (IP code): IP55, The pump shown is a powerful vacuum pump designed for industrial and research applications. It offers high pumping speed and efficient vacuum generation, ideal for processes that require a reliable vacuum. With its robust design and user-friendly operation, it ensures a long service life and low maintenance costs. The pump is also energy efficient and helps to reduce operating costs. Thanks to its compact design, it can be easily integrated into existing systems. Cslqsuu Scdjxzh Tjgt

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, Functionality: fully functional, total length: 1,800 mm, total width: 1,800 mm, total height: 730 mm, Big bag emptying device for poorly flowing products with fulling device. The big bags can be connected to a low-dust device. Colstrlvkoqxzh Tegt

Condition: good (used), High performance pumps, pump block for storage and retrieval of fuel oil, diesel, lubricants, oils, biodiesel, waste oil, frsich oil, ect.... Manufacturer: Pumps: Alfons Haar Hamburg Electric motors: Flender Capacity: 380 l/ min and 700 l/ min The plant consists of 2 units with 3 pumps and electric motors each. Control cabinets are also included in the scope of delivery. Cjleiw Ehboqxzh Tjgt Note: the electric motors are not sold separately ! Only serious and serious inquiries are answered under indication of: Name, e-mail address and telephone number answered.

Condition: ready for operation (used), Pipe Pump, Screw Pump, Used Machine Cgelqovgwacexzh Tjt Overall dimensions: Length: 2330 mm Width: 400 mm Height: 500 mm Weight: 240 kg Electrical data: Voltage: 400V Power: 4 kW Current: 8.6A

Condition: good (used), Speed adjustable with a frequency converter, cast steel housing and impeller. In new condition, little used. Manufacturer: GRUNDFOS Type: TPE 100-390/2 A-F-A-BAQE-QX1 Article number: 96110285 Nominal volume flow: 171 m³/h Nominal pressure: 16 bar Nominal transport height: 34 m Cgslqxjlhrkkozh Tjt Installation length: 550 mm Engine power: 22 kW