Vacuum pump

Leybold SOGEVAC Wilo WO71075-2-B3(1)

Year of construction: 2023, condition: new, Tank capacity: 270 l Kodpohmi Nqjfx Agzjnf Volume flow: 680 l/min Motor power: 5.5 kW

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Knjdpfxohwwyre Agzef Visit our store. We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 13 h, machine/vehicle number: MA0147_2999, Exhibit: Compressor Kaeser SM 13 (10 bar) with SIGMA CONTROL 2 Year of construction: 2024 Operating hours: 13 Bh Techn.Daten: Volume flow at 10 bar: 1.08 m³ / min Motor power: 7.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 630 x 790 x 1100 mm Kedpfx Agsh E Ecrszonf Weight: 240 kg Connection compressed air: G 3/4 " Sound pressure level: 65 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm Knjden Stanjpfx Agzsf weight approx. 850 kg

Condition: new, overall weight: 340 kg, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm Kedpfx Ash Unupjgzsnf - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Knodpovk R A Sjfx Agzjf Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), This sturdy workbench is perfect for DIYers and professionals who need a stable work surface with storage space. The work surface is made of 38 mm chipboard with a high quality canted flat sheet laid on top, providing a solid foundation for any type of project. Underneath the work surface is a shelf with 12 drawers (6 drawers per side), providing plenty of storage space for tools, materials and accessories. Included in delivery are: 01x workbench, used/ new System: SSI Schaefer Type: PR 600 Dimension: approx. W 2.900 x D 800 x H 940 mm consisting of each: 02x workbench stand, II. choice (new goods) material color: sendzimir galvanized stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, new Material color: blue box profile: 110 x 40 mm clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard, used dimension: 2.900 x 800 x 38 mm if necessary in two parts 08x drilling screws, new finish: galvanized Dimensions: 6.3 x 70 mm 01x steel cover, new Material color: sendzimir galvanized Dimension: 2.900 x 800 x 40 x 1 mm 01x shelf rack, II. choice - incl. pull-outs - System: SSI Schaefer Type: R 3000 consisting of each: 12x ESCH 9420 incl. pull-outs, II. choice 12x side panel SBL-ESCH 4200, pair, I. choice 06x frame 400 x 735 mm, II. choice 06x frame connector RV 3006, I. choice 08x Longitudinal bracing LV 3133, I. choice 08x intermediate shelf ZB 9415 V, I. choice Knjdpfx Ajmrqk Regzsf Note: The workbench is delivered in an unassembled condition. The shelf rack is already pre-assembled upon delivery.

Condition: new, Year of construction: 2025, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Power 22 kW Power supply 400V/50Hz Theoretical air flow 3,2 m3/min Actual air flow 2,803-3,09 m3/min Dimensions 1380 x 850 x 1160 mm Weight 430 kg Knodpsmt Dt Ijfx Agzjf Most important advantages: INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2022, condition: excellent (used), Screw compressor Elmag / Mark MSM 4 D-270 AD 2000 m. ES 4000 Basic, year of manufacture 2022, 127 operating hours, 7489 standby switch-on hours, max. Operating pressure 10 bar, Effective delivery 516 l/min, with refrigerant dryer, Knsdpfx Agsma Hv Sjzof

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: S0065457, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Year 2023 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 11 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 66 dB (A) Length: 800 mm Knodpsd Db Ixjfx Agzjf Width: 670 mm Height: 1100 mm Weight: 285 kg Compressed air connection: G 3/4 "