Used Wire straightening machines for sale (35)

Condition: excellent (used), Year of construction: 2019, operating hours: 1 h, Functionality: fully functional, Wafios Wire Straightening and Cutting Machine Model: R 36 EBS Year: 2019, 2016(2), 2015 (Model R 35 EBS) Specifications: Dsb Esv Nn Ipjxmr Isut Feed Speed: 5-180 m/min Wire Diameter: 600-800 N/mm2: 2.5-7.0 mm Cutting Lengths: 150-1000 Performance, rods: max. 180 pcs./min Chamfering 4 Available

Condition: good (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 122.ES.98, Reinforcement mesh welding machine VIDA For production of welded reinforcement meshes Producer of the equipment: VIDA VRES Year of production: 2002 Status: in working order / operational  1.Main technical properties 1.1. Working dimensions Width of mesh (length of transverse rib) max min 2400 mm 1500 mm Length of mesh (length of longitudinal rib) max min 6000 mm 3000 mm Distance between longitudinal rods (between center axes) max 2400 mm Longitudinal cell size 150 – 200 mm Transverse cell size 50 – 200 mm Diameter of longitudinal rib 5.0 – 10.0 mm Diameter of transverse rib 5.0 – 10.0 mm Longitudinal indentation In beginning At the end 25 – 200 mm 100 – 200 mm Transverse indentation 10 – 400 mm Number of longitudinal ribs max 16 pcs 1.2. Data on connections and consumption Information about connections and consumption is informative. More exact calculations are to be made after clarification of technical and commercial questions. 1.2.1. Electric current Three-phase current 400V, 50Hz Control current 24V Permissible voltage fluctuations of the electrical network ±10% Recommended connection power 600 KW Recommended power for welding in cascading mode ~60 KW 1.2.2. Cooling water Inlet temperature max 25ºС Pressure max 1.5 Bar Supply and return pressure 3.5 Bar Water hardness according to German scale, dH 7-8 Hydrogen ion, pH 7-8 Consumption max 120 l/min 1.2.3. Compressed air Pressure 6 bar Classification of air according to ISO 8573-1 min 5 Air compressor performance 200 l/h Oil and moisture pollution is not allowed, the air should be slightly lubricated 1.2.4. Environmental conditions In accordance with ISO 669-1 Air Temperature +5 - +40ºС Relative humidity 95% 1.3. Production speed and parameters Maximum 90 pcs per minute transverse ribs for 6mm rebar 1.4. Raw material requirements Raw material has to comply with technical requirements for production of spotwelded reinforcement mesh - scale free, grease-free and rust-free. Raw material can be profiled or plain with good welding properties, non-alloy, without impurities, Carbon equivalent not more than 0.4%, tensile strength max 650 N/mm2. Ribs are fed pre-straightened and cut to size on suitable equipment with correct rotating device. 2.Technical specification 2.1. Used reinforcement mesh welding machine VIDA Equipment is to be used for welding of reinforcement mesh. Full set of equipment consists of the following: - Manual loading of longitudinal ribs. Feeder of longitudinal ribs is with pipe gliders; - Welding portal with 8 pneumatic welding presses; - Power of each transformer is 110 KW – 6 pcs (4 pcs new, installed 2019, Sarmata, Italy); - Feeder of transverse ribs is a pre-loading magazine. With help of pneumatic capture they are fed for welding. (see attached video) - Length of flipping table is 6m with Schneider Electric control; - Mesh stacker for mesh up to 6m. - System with thyristor welding! Cabinet of control S7 300 Siemens - Original technical documentation in Italian. Dsbowhvvks Exmr Ijut - Instructions in English

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm Dusb Exju Ic Hnomr Ist wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: excellent (used), wire range 8-15 mm Duob Exmrev T Iate Ijt Total length approx. 1100 mm Weight approx. 200 kg The condition is good as new.

Year of construction: 2000, Condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Djb Exmroim Itto Iout

Year of construction: 1985, Condition: refurbished (used), Dimeter range- 4-10mm Debedt Arls Exmr Isut Cutting lenght - 2,0 m ,(possibly longer) Speed -90 m/min. Reconstruction- 2018 Control - PLC Siemens Double mechanic pay off wire

Condition: used, Year of construction: 1991, wire diameter range: 1,0 - 4,0 mm cutting length: up to 2.000 mm Dusb Exmjc Szvper Iot wire feeding speed: 5 - 90 mtr./min

Condition: excellent (used), Witels-Albert wire straightener, consisting of 1x type ER 7 - 9.0 wire range 7-9 mm 1x type ER 5 - 9.0 wire range 7-9 mm Total length approx. 500 mm Djb Exsu S R Ifemr Iout Weight approx. 20 kg

Year of construction: 1997, Condition: refurbished (used), Technical Details : - Speed - 90 m/min. - Power - 20 Kw - two engines - Recondition - 2018 - Run out table - 6 m - Wire Range - 2- 12 mm Dujb Exsdz S Tvemr Ijt - Cut unit - flying knives

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. complete with ciller and Dujb Exe Syv Tsmr Iot motorized decoiler

Condition: excellent (used), Wire straighteners from different manufacturers and different working ranges are available. Duob Eetmf A Dsxmr Iot Please take a look at the pictures with the technical data. We can send you further photos and technical data.

Year of construction: 1979, Condition: used, Dimeter range- 3-10mm Cutting lenght -4m ,(possibly longer) Speed -90 m/min. Reconstruction- 2016 Control - PLC Dsb Exmrscv A I No Ieut

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 2.000 mm Dob Exmrec Ucxfs Iout wire feeding speed: 5 - 120 mtr./min * machine is been complete new painted*

Year of construction: 1985, Condition: used, Wire range - 2 - 6 mm Run out table - 1 m ( can be longer ) Speed - max. 90 /min. El. Power - 8 kw Deb Exedqubqjmr Ieut Automatic wire pay of - max. 800 kg Machine is in very good condition and restored in 2017

Condition: excellent (used), Year of construction: 1973, wire diameter range: 0,8 - 2,0 mm cutting length: up to 2.000 mm wire feeding speed: up to 40 mtrs./min Dusb Eed N S Eaoxmr Ist

Condition: used, Diameter range- 1-4 mm Cutting lenght - 2 m Speed - 60 m/min. Reconstruction- 2016 *More pictures and video at the customer's request* Dusb Exmrecv A N Es Iot

Condition: excellent (used), Year of construction: 1984, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm Dusb Esmt A Svjxmr Ijt wire feeding speed: 29 - 90 mtr./min

Year of construction: 1980, Condition: reconditioned (used), Technical Details : Dob Exmshqfl Asr Isut Wire Dimeter range- 4-14mm Cutting lenght - 8,5m Speed -70 m/min. Reconstruction- 2022

Condition: excellent (used), Year of construction: 1983, wire diameter range: 2,5 - 7,0 mm cutting length: max. 4.000 mm wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000* Duob Eefkx Trsxmr Iet

Year of construction: 1990, Condition: reconditioned (used), Technical Details : Wire Dimeter range- 2-6 mm Run out table - 4m Speed -80' m/min. Reconstruction- 2022 Dsb Esh In Tpjxmr Ijut

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Dsbjtndgpo Exmr Isut

Year of construction: 1997, Condition: excellent (used), Offer Number: D08I/8070 Machinetype: straightening and cutting machine Make: WAFIOS Type: R21 Constr. year: 1997 Diameter range: 1-4 mm Cutting length: max. 2000 mm Speed – meters/min: 5-90 Dsb Exmron Ut Dps Iout Operation Hour - 5.500

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector Dob Eefkmr Sjxmr Ieut 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: excellent (used), Year of construction: 1999, Width of mesh ,(length of transverse rib) - 1500-2400 mm Length of mesh , (length of longitudinal rib) - 3000 - 6000 mm Distance between longitudinal rods , (between center axes)- 2400 mm Longitudinal cell size - 150 – 200 mm Transverse cell size - 50 – 200 mm Diameter of longitudinal rib - 5,0 – 10,0 mm Deb Exsrpmvmsmr Ijut Diameter of transverse rib - 5,0 – 10,0 mm Longitudinal indentation In beginning At the end - 25 – 200 mm , 100 – 200 mm Transverse indentation - 10 – 400 mm Number of longitudinal ribs - max 16 pcs NOTE - New Electric components

Year of construction: 1985, Condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Dusb Exoh In Themr Iet Reconstruction- 2022