Sandblasting plant

AGTOS TS 150-3.6-01-15,0

Condition: used, Year of construction: 2017, Technical details: Djdpfsvvvrpex Agdeul operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Drum ø: 400mm Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Dujdpjn E Tubefx Agdjl Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1/Dyn5/Dyn11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Dsdpfsl Tm Uvox Agdsul

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong Dodpfefg E Hpjx Agdsul reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm Dujdpslf Hq Njfx Agdsl

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. Dsdpfxsf Nku Rs Agdoul On the last three photos you can see plants of this design in operation.

Year of construction: 2020, condition: new, DESCRIPTION Duodpfx Asfz Naksgdjl The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request Dusdpewd Udlsfx Agdol terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: Djdpfen Ut Ilsx Agdsul - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: used, Year of construction: 1996, charge load 135 liter 1220 mm tank diameter / tank height 1.220 / 1035 mm 304 mm motor capacity 0,75 kW motor speeds: 1500 U/min voltage 400 V weight of the machine ca. 600 kg Dodpfx Aowcg Ersgdjul dimensions of the machine ca. 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit