Pure air extractor

AL-KO POWER UNIT 350 +

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Kljdpfsxpximsx Amzjr Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Kedpsv Uq Tljfx Amzelr Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Klodpswzyh Rjfx Amzsr Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Ksdpocqy I Sjfx Amzslr Location: in stock 54634 Bitburg

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Kljdpefyiqbjfx Amzor There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: used, Year of construction: 2006, Used, in excellent condition Low operating hours Ex-government unit Manufacturer: Alko Model: Power Unit 300 P Year of manufacture: 2006 Clean air unit / negative pressure GS dust certified CE type tested Motor 7.5 kW Connection diameter 300 mm Pressure 2,400 Pa Airflow 6,000 m³/h Collection drums 900x600 mm Filter area 30 m² Automatic/pneumatic filter cleaning Filter pressure monitor Soundproofed Integrated extinguishing system Original price approx. 19,545 EUR Space required approx. 3,000x1,058x2,361 mm Weight approx. 880 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Handed over in as-inspected condition, without warranty or guarantee. Kedpfx Aex Nqvhomzolr

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Klsdpfxjxrahco Amzjr Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Kljdpovviytjfx Amzsr Storage location: Nattheim

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width Kledewkbcbopfx Amzjr - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Kljdpfxet Hg Huo Amzer Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.