Bag filter

Alfarimini Euro 2

Condition: good (used), Year of construction: 2007, Technical characteristics : Lodpfx Abot R T Hce Tsrh - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Year of construction: 2000, Number of boring spindles 5 St. Working width 230 mm Working height 160 mm Lrsdowztw Sepfx Ab Teh Feed motor 4 kW Feed speed 5-24 m/min.

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm Lodpov I A Nlefx Ab Terh - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Condition: new, Optimum OPTIdrill D 33 Pro pillar drill action set 3003040SET with V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 915mm Column diameter 92mm Width/depth (product) approx. 450mm Height (product) approx. 1705mm Weight (net) approx. 132kg Drilling capacity Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 25mm Drilling table Drilling table work surface length 475mm Drilling table work surface width 425mm Drilling table T-slot size 14mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drill table max. 695mm Speed range Speed range120 - 1810min¯¹ Number of speed ranges9 Electrical data Drive motor power 1.1kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 410mm Machine foot working surface width 325mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 250mm Spindle Quill stroke 120mm Lsdpfx Abot N Iuxj Tsrh Spindle holder MK4 throat 254mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 4/B16 T-nuts Machine vice BMP

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Ledpfx Abjw D Dhaj Tsrh

Condition: used, 2-axis CNC spindle moulder "CASOLIN" model F 90 KTL USED MACHINE - V380/50 - "CE" [code: TOU-051] Complete with: * extended infeed table 1990x770 mm * extendable support bar * tenoning guard (for tools max. diameter 330 mm) * tenoning carriage * pendant control * support for powered feed unit * 4-roller feed unit "MAGGI" * strip protection device * spindle diameter: 40 mm * spindle speeds: 3000/4500/6000/8000/10000 rpm Ljdpew Awk Sjfx Ab Terh * motor power: 7.5 kW

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Lredpfxevgmbvo Ab Tsh Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: used, Year of construction: 2010, machine/vehicle number: AB/203002, functionality: fully functional, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 - Motor Hp 10 - Inverter for speeds change Lsdpfx Absx Runqs Terh - Motirzed scoring unit adjustement - Serial number AB/203002 - Year 2010 (CE)

Condition: used, Year of construction: 1977, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Lrsdjiz Tmkspfx Ab Toh Ready for use .

Year of construction: 2022, condition: new, angle: 0° - 90° Lsdpfx Aei Ezr Nsb Tsrh max cutting length: 1370 mm