Screw compressor

Alup ALLEGRO26 CE

Condition: excellent (used), Year of construction: 2016, S016277 PROD. ALUP TYPE ALLEGRO26 CE S/N CAI907698 YEAR 2016 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) Pgjdpsz A Tk Asfx Afujt INVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air CONNECTION 1" NEW/USED used DOCUMENTATION no

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy. Pedolxyhfspfx Afusgt

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: CAI946254, overall weight: 466 kg, volume flow: 283.8 m³/h, pressure (max.): 13 bar, Equipment: type plate available, PROD. ALUP TYPE ALLEGRO26 CE S/N CAI946254 YEAR 2016 Pgodpfx Afjwn Dxyeujt CAPACITY (kW) 26 OUTPUT (m3/min) 0.77-4.73 at 7 bar CIS (bar) 7-13 INVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) air ENGINE SIEMENS 1AU2166BAPL3, CLOSED CONNECTION 1" NEW/USED used

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Pedpfxjvxlq Ho Afuogt Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Pgsdpfx Afowbf U Neust

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Podpfxju Idkzj Afuegt Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top Pgjdjq Ec D Tepfx Afuet - Dimension: - Total length: 4900 mm - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm - Outlet 1400 mm - Washing height: 1500 mm - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Psdpfexyk Ucex Afujgt

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Pedpfx Afjxk U Dceujgt Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Pgsdpfevxhfmex Afuot Dimensions 1200x1000x1910mm Weight 440 kg