Screw compressor ZR160FF

Atlas Copco ZR160FF

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 5,450 mm, total width: 2,780 mm, total length: 3,047 mm, table height: 833 mm, Equipment: safety light barrier, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. Kedjywu H Tepfx Amzelr We ask for your understanding

Condition: good (used), Year of construction: 2019, Gebruikte waterstraalsnijder van Microstep (ex lease) Kledpjxldvqsfx Amzer Type: AquaVut 6001.25 WW Tafelafmetingen: 6000 x 2500 mm Hypertherm 4100 bar pomp 2 snijkoppen Bouwjaar: 2019

Condition: good (used), Year of construction: 2003, Megamat Type: FSE 3.5 2448/816-3785 Kljdpfxjytgbgj Amzer Device no.: 35.0070 Year of manufacture: 2003 Unit height: approx. 3785 mm Unit width: approx. 2640 mm Unit depth: approx. 2710 mm Number of trays: 20 Tray width: approx. 2240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Compartment load capacity: 307 kg Total load capacity: 70,000 kg Colour: white

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 37Kw 2011 SCREW COMPRESSOR! ATLAS COPCO GA37 screw compressor machine after service Technical data: capacity: 6.30 m3/min; 37 KW engine; Kjdpfxji D Ef Hj Amzolr max pressure 8 bar; year;2011 mileage;3431h!!! Compressor fully functional, ready to work, warranty we provide service.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 5,950 mm, total width: 3,380 mm, total length: 3,047 mm, table height: 833 mm, Equipment: safety light barrier, We inform, that we currently only sell or deliver to the Klodpfx Aoywu Dfsmzsr D-A-CH and Be-Ne-Lux countries. We ask for your understanding

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 Klsderz Rtbjpfx Amzsr CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED

Condition: good (used), Year of construction: 2009, Megamat FSE Lift Type: FSE 7.1 2448/612-4260 Serial no.: 500002883 Year of manufacture: 2009 Unit height: approx. 4260 mm Unit width: approx. 2850 mm Unit depth: approx. 2400 mm Number of trays: 33 Tray width: approx. 2670 mm Tray depth: approx. 816 mm Klsdpoyxyxqefx Amzer Maximum tray load: 400 kg Total load capacity: 70,000 kg Colour: beige

Condition: used, Year of construction: 2010, operating hours: 10,409 h, functionality: fully functional, working range: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6,000 bar, operating pressure: 6,000 bar, input current: 120 A, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, year of last overhaul: 2026, water pressure: 6,000 bar, pump pressure: 6,000 bar, working length: 4,000 mm, input frequency: 50 Hz, We offer this used Flow FLOW Mach 4 4020b waterjet cutting system, year of manufacture 2010. Dynamic XD | 100 HP HyperJet | NEW Drive Retrofit 2026 Manufacturer: Flow Model: FLOW Mach 4 4020b Year: 2010 Machine Description For sale is a high-performance and freshly serviced precision waterjet cutting system from the global market leader FLOW, model Mach 4 4020b. This system is equipped with Flow’s high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. Special highlight for buyers: In January 2026, the manufacturer (Flow Europe GmbH) carried out a comprehensive technical service. An official drive controller retrofit kit was installed (approx. €18,000 incl. installation). As original replacement controllers for this model year are often no longer available, this upgrade offers long-term spare parts availability and modernized electronic control. A test cut was successfully carried out following the retrofit. Technical Data • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with automatic angular error correction) was used by us only for automatic angle compensation • Abrasive system: Flow Paser 4 Kodsywtitspfx Amzslr • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Electrical requirements: 400V, 50Hz, 3-phase (120A full load) Condition & Equipment • Technical condition: Immediately operational • Maintenance history: Current technical service report from the manufacturer available (January 2026) • Upgrades: New drive controllers (retrofit kit) and overhauled wiring on C-axis • Productivity: The 6,000-bar technology enables up to 50% faster cutting compared to standard systems Inspection & Transaction • The system is currently still connected and can be viewed and demonstrated under power • Location: 78549 Spaichingen (Baden-Württemberg), Germany • Viewing can be arranged at short notice by appointment Scope of Delivery • Flow Mach 4 4020b waterjet system • HyperJet 100 high-pressure pump • Control terminal including software • Technical acceptance report / service report from 01/2026 • Abrasive system: Flow Paser 4 Legal Notice (B2B): Sale only to commercial customers. Warranty, liability for material defects, and returns are excluded. Sold as seen/tested. All information is provided without guarantee, subject to errors and prior sale. If you have any questions or require further information, please feel free to contact us via message or by phone.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: API502813, overall weight: 970 kg, volume flow: 280.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 YEAR: 2005 CAPACITY (kW): 37 OUTPUT (m3/min): 4.5 CIS (bar): 13 HRS (DOC/GENERAL): 95183 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED (AIR/WATER): air Kljdpfjv Hqkuex Amzer ON THE TANK: no DOCUMENTS: no CONNECTION: 2' and 1 1/2' S014585

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available Kedpfsnab Rzox Amzjlr - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!