Second-hand machinery for sale (2,359)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,000 h, Functionality: fully functional, controller model: Siemens 840D (Powerline), Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control: Siemens 840D (Powerline) Main spindle passage: 90 mm, C-axis Counter spindle passage: 90 mm, C-axis Turret 1: 12x VDI 30, all stations driven, axes X/Y/Z/B, additional milling spindle on the rear of the turret Duehx Dsv D E Dkovygot Turret 2: 12x VDI 30, all stations driven, axes X/Z EQUIPMENT - Portal removal device - Chip conveyor - Pumps - Collets - Tool holders (fixed and driven) - Manuals

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 3MT2 D/A C2 0789, saw blade diameter: 500 mm, cutting width (max.): 600 mm, pass-through width: 750 mm, saw drive: 110 W, rotational speed (max.): 3,000 rpm, TECHNICAL DETAILS Cutting height (max.): 220 mm Cutting height single-shaft: 160 mm Cutting height double-shaft: 180 mm (but should be higher with max. saw blade diameter of 500 mm) Cutting width (max.): 600 mm Wood length: 2.0 - 6.0 m Passage width: 750 mm Saw blade diameter (max.): 500 mm Speed (max.): 3,000 rpm Dushjvi Nrcsx Dvyget Saw shafts Saw cut: right and left with one movable shaft each There is a telescopic bushing on the shaft on the right in the direction of travel so that the innermost saw can be moved separately Saw cut option 1: One saw shaft from above Saw cut option 2: 2 saw shafts, top + bottom Saw direction: synchronous Type: Cobra 3 MT 2+1 Drive Power (total): 350 kW (475.87 HP) Engine power: 1st shaft right: 55 kW 1st shaft left: 55 kW Double shaft: 2 x 110 kW MACHINE DETAILS Total weight: 11,000 kg EQUIPMENT Simple alignment table in front of the system Extension including tunnel

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, turning length: 750 mm, turning diameter: 380 mm, spindle speed (max.): 3,800 rpm, Main spindle re-bearing - 0 operating hours TECHNICAL DETAILS Turning diameter: 380 mm Turning length: 750 mm Control: Manual Plus Heidenhain Spindle bore diameter: 45 mm Main drive motor power: 11 / 9 kW Main spindle speeds: 3,800 rpm MACHINE DETAILS Machine weight: 1,900 kg Machine dimensions: 2,400 x 1,600 x 1,900 mm Operating hours: 0 h (main spindle re-bearing) On time: approx. 28,600 h Dohxov Hp D Hs Dvygjut EQUIPMENT - Cycle-controlled lathe with electronic handwheels - Collet holder 173 E - 3-jaw chuck SCHUNK Rota S plus D = 250 mm - Follow-on steady rest - Fixed steady rest - Cooling water system with chip tray - various accessories, tool cabinet, new wear parts - PARAT 25x25 steel holder system with one holder - operating instructions

Condition: good (used), Year of construction: 2007, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control unit: Mitsubishi Meldas 700 main spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle clearance: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Pick-up spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven tools on vertical holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool system Turning tools (12x12x130): 5 Tool holder/cutting tool (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning steels (shank cross-section): 12 mm Collets and guide bush Collet main/tapping spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid traverse rates All axes: 32 m/min Machine specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA Duehx Deu U Efwovygst EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for end face machining on the main spindle - 3 driven tools for end face machining on the pick-up spindle - Main spindle with C-axis - Counter spindle with C-axis - 3x AGW rear end machining - Yellow warning light - Interior light - Workpiece conveyor belt - Kraft & Bauer CO² fire extinguishing system with fire damper - Loading magazine FMB Turbo 3-26 with two channels

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, measuring range X-axis: 2,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,500 mm, TECHNICAL DETAILS Dehx Dvsv Naw Aeygjut Effective measuring range: approx. 2,200 x 1,200 x 1,500 mm Measurement uncertainty: from 25 + 15 x L/1,000 µm Probe: Zeiss RDS with Renishaw TP20 Drive & Control Drive technology: DC motors with friction wheel Control: Zeiss C99 Operation: Handset with controller Machine is sold without a PC and without software

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial Duohjvitznex Dvygot

Year of construction: 2016, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 64938, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area: 1,300 x 1,600 mm Processing speed: max. 100 m/min Rotation (C-axis): 4 s⁻¹ Feed axis (Z-axis): 5 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Repeatability: ± 0.02 mm Table compensation without: ± 0.2 mm Table compensation active: ± 0.03 mm Universal tool module Stroke of the feed axis: max. 30 mm Free passage under bridge: 25 mm Pressure force of the tools: max. 400 N Chip extraction Manufacturer: WAP Type designation: ATTIX 30-11 PC Djhx Dsvmqq Uevygjut Connection voltage: 230 V Drive power: 1.5 kW Max. negative pressure inlet: 25,000 Pa Max. air flow: 3,700 l/min Number of filter elements: 1 Filter material: PET Filter cleaning: manual Weight: 10 kg Dust container capacity: 30 l Dimensions: 450 x 380 x 595 mm Tool units Drawing tools: Quick-change tool types for gas pressure leads, plotter pens and fiber tips Fixed cutting tools: Tangentially controlled tools for standard knives Oscillating cutting tools: Stroke 3 mm up to max. 6,000 strokes/min Grooving tools: For grooving wheels and grooving skids 3D milling unit: High-frequency spindle with 5,000 to max. 40,000 rpm Camera unit: Resolution 752 x 480 pixels MACHINE DETAILS Weight: 460 kg Dimensions: 2,629 x 1,860 mm Height: 1,179 mm Connection value: 4.1 kVA EQUIPMENT - Robust cutting module with extensive customization options - Drawing tool - High frequency spindle - Camera unit - Active table compensation system for precise machining - Manual - Circuit diagrams

Condition: ready for operation (used), Functionality: fully functional, For stacking planed goods (was used after a planing system that delivered 150 m/min) Individual components 1. strip separator / cross conveyor (HIT) 2. cross transport with hook conveyor and turner (HIT) 3. separating/clamping unit (Weinig) 4. stacking machine (Sicko) 5. 2x roller conveyor TECHNICAL DETAILS Duohovi Nndex Dvyget Working height: 2.7 m Planed goods dimensions: 17 x 75 x 2,000 - 80 x 200 x 6,000 mm Package dimensions: max. 1,200 x 1,200 mm Output: 20 parts/min

Condition: ready for operation (used), Year of construction: 2011, operating hours: 14,500 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, 5-axis simultaneous universal machining center TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 x-path: 850 mm y-path: 500 mm z-path: 610 mm Rotary table: 400 mm Spindle speed: 12,000 rpm Drive power - spindle motor: 17/10 kW Tool changer: 40-fold Spindle holder: SK 40 MACHINE DETAILS Machine weight: 7.7 t Djhev Hpt Ijx Dvygout Total power requirement: 28.5 kW Space requirement: 3 x 2.70 x 3.2 m Switch-on hours: 38,000 Spindle hours: 14,500 EQUIPMENT NC rotary swivel table Ø 400 mm 3D infrared measuring probe electric handwheel chip conveyor blast air through spindle IKZ 40bar rinsing gun direct measuring system

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS Duohov Hmdqsx Dvyget X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, controller model: Dea Standardsteuerung B3, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,000 mm Length measurement uncertainty: E = [2.7 + 5L/1,000] µm (ISO 10360) Dohx Dvyjv Nanusgsut Control, probe & software Control: DEA B3 Probe system: Renishaw PH10MQ with TP200 Software: PCDMIS CAD++ (V2019) Computer Manufacturer: Hewlett Packard Elite 8000 Operating system: Windows 10 Pro Monitors: 2x TFT

Condition: ready for operation (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, load capacity: 120 kg, arm reach: 2,701 mm, TECHNICAL DETAILS Maximum reach: 2,701 mm Nominal load capacity: 120 kg Maximum load capacity: 167 kg Maximum additional load carousel / swing arm / arm: 300 kg / 130 kg / 150 kg Position repeatability (ISO 9283): ±0.05 mm Number of axes: 6 Control system: KR C4 Range of movement A1: ±185° A2: -140° / -5° A3: -120° / 168° A4: ±350° A5: ±125° A6: ±350° Speed at nominal load A1: 120°/s A2: 115°/s A3: 120°/s A4: 190°/s A5: 180°/s A6: 260°/s MACHINE DETAILS Installation position: Floor Installation area: 754 mm x 754 mm Weight: approx. 1,069 kg Running time: approx. 120 h - 200 h (pre-acceptance, no active use) Network cable length: 10 m Power supply: AS13 134 CTR PNT EPS AIR AIR GDN Ambient temperature during operation: 0 °C to 55 °C (273 K to 328 K) Protection class (IEC 60529): IP65 Degree of protection for robot hand (IEC 60529): IP65 / IP67 EQUIPMENT - KR C4 basic enclosure - Drive configuration SC6.1 - Special paint finish for control cabinet (color: RAL 7035 light grey) - Labeling set de/en KR C4 - Double-bit cabinet lock Duohx Dsvi Igfjvyget - Mains supply HAN6 - Power supply XFMRless 400V - CSP Standard 2x USB 3.0 - Safety interface X11 - Kuka WorkVisual - Kuka PLCProConOS4-1 4.1 - SmartPAD holder - SmartPAD - Connecting cable set X20 (15 m) - BUS-smartPAD cable (10 m) - Axis limitation A1 20°

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT - Machine completely repaired and checked + painting work - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points Dujhjv Hrixox Dvygjt - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 09 Clad Degassing System, Dual, Weight in kg: 5,400; Duehx Dsvwlhpjvyget Attention. NH bearing - seaworthy packed

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Dehx Dvysuwrz Togsut Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: ready for operation (used), Year of construction: 1998, operating hours: 56,210 h, Functionality: fully functional, machine/vehicle number: 888138, pressing force: 234 t, travel distance X-axis: 600 mm, working length: 3,060 mm, stroke distance: 365 mm, TECHNICAL DETAILS Pressing force: 2,300 kN Working length: 3,060 mm Max. stroke: 365 mm Max. operating pressure: 305 bar Follow-up time: 53 ms Safety distance: 84 mm Working area Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Inclined position of pressure beam: ± 10 mm Free column passage: 2,690 mm Thrust: 410 mm Table width: 200 mm Working height at 100 mm tool usable height: 1,050 mm Speeds Y-axis rapid traverse: 200 mm/s Y-axis working speed: 11 mm/s Y-axis retraction: 135 mm/s X-axis: 500 mm/s R-axis: 300 mm/s Accuracy Position deviation Y-axis: 0.01 mm Position deviation X-axis: 0.04 mm Position deviation R-axis: 0.08 mm Travel range stop area Y-axis stroke: 365 mm Travel range X-axis: 600 mm Max. stop range in X: 860 mm Travel range R-axis: 250 mm MACHINE DETAILS Length: 3,660 mm Width: 2,310 mm Height: 3,095 mm Weight: 18,210 kg Operating hours: 56,210 h Electrical supply Voltage: 3x 400 V Nominal current: 60.5 A Frequency: 50 Hz Connection power: 37.0 kVA Duohx Dvev E E Rajygjt Control voltage: 24 V Compressed air connection: 6 bar Suspensions and transport Suspension holes: diameter 80 mm Distance to top edge: 150 mm Thickness of side plate: 80 mm Transport weight: 17,700 kg

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Duohev E Rkrjx Dvygot Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: ready for operation (used), Year of construction: 2008, operating hours: 6,854 h, Functionality: fully functional, machine/vehicle number: 135391, turning length: 1,000 mm, turning diameter: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 45 rpm, tool mount: 40 mm, swivel angle C-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! Dujhx Dvyjv Evq Rjgst Lathe for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guideways. The high-torque drives ensure high precision and long-term accuracy. TECHNICAL DETAILS Control: OKUMA OSP-P200LA Turning diameter: 50 mm Tailstock for turning length: approx. 1,000 mm Self-centering steady rest, clamping diameter range: 4 - 64 mm Steady rest holder: fixed Door automation: LB300EX-C1000 Spindle data C-axis: 360 / 0.001° Power: 7 kW Torque: 23.7 Nm Speed range: 45 - 6,000 rpm Tool drive Tool holder: 12 positions, DIN 69880 system, diameter 40 x 63 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6,000 rpm MACHINE DETAILS Dimensions (L x W x H): 3,620 x 2,057 x 2,056 mm Weight: 6,150 kg Connection voltage: 400 V, 3-phase, 50 Hz Power consumption: 41.3 kVA Machine on-time: 29,556 h Program run time: 6,854 h Spindle time: 6,696 h

Condition: good (used), Year of construction: 2008, operating hours: 10,180 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, TECHNICAL DETAILS Electrical specifications: Operating voltage: 400 V Frequency: 50 Hz Connection: 20 kVA Control system: Control: FANUC mill i Spindle: Max. Spindle speed: 12,000 rpm Traverse paths: X-axis travel: 1,020 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Rapid traverse: 40 m/min Table: Table dimensions: 1,200 x 500 mm Max. Load capacity: 500 kg Tool holder and tool change: Tool holder: BT40 Tool changer: 30-fold Machine data: Year of construction: 2008 Machine weight: 6,850 kg Dimensions (L/W/H): 2,470 x 2,540 x 2,750 mm Tool parameters: Normal tool - Max. Tool diameter: 88 mm Standard tool - Max. tool length: 280 mm Tool length: 280 mm Standard tool - Max. Tool weight: 7 kg Large tool - Max. Tool diameter: 125 mm Large tool - Max. Tool length: 280 mm Large tool - Max. Tool weight: 7 kg Tool change time: Tool change time (chip to chip): 5 s Cooling and handling systems: IKZ: Yes (8 bar) Electric handwheel: Yes Chip conveyor: Yes Operating hours: Dehxou N If Ej Dvygout Switch-on hours: 42,230 h Spindle hours: 10,180 h The machines were only operated in a single shift and only approx. 50% of the time.

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual, Weight in kg: 13,330; Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport. Dshx Dvjvwlg Seygsut

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PRJ037887, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, rotational speed (max.): 13,000 rpm, distance table to spindle center: 740 mm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Machining center including dividing head TECHNICAL DETAILS X-axis (longitudinal stroke): 600 mm Y-axis (transverse stroke): 400 mm Z-axis (vertical stroke): 600 mm Distance spindle-table (min./max.): 140/740 mm (with spacer, item special option 2) Control: Heidenhain iTNC 530 with smarT.NC Machine table Table width: 750 mm T-slots according to DIN 650 (width/distance): 14 x 80 / 100 mm Middle T-slot as guide slot: 14 H7 mm Table load: max. 500 kg Main spindle drive Spindle type: Conventional main spindle with 4-way fixed-loose bearing and lifetime grease lubrication Bearing seal: Sealing air seal with additional splash ring Tool holder: SK 40 (according to DIN 69871) Pull bolt: DIN 69872-19 Blown air through the spindle center: available Spindle drive motor Type: 4-pole, frequency-controlled three-phase asynchronous motor with external air cooling (maintenance-free) Drive power (25% duty cycle): max. 13 kW Torque (25% duty cycle): max. 55 Nm Speed range continuously variable (25% duty cycle): max. 13,000 rpm Tool magazine Magazine type: plate Magazine positions: 24 Tool diameter (fully loaded): max. 100 mm Tool diameter (with free adjacent positions): max. 200 mm Tool length (at Ø 25): max. 350 mm Tool weight: max. 4 kg Tool change time: approx. 1.9 s Chip-to-chip time: approx. 3.9 s Dujhx Dvysv Evpmeget MACHINE DETAILS Air pressure: min. 6 bar Hydraulics: max. 6.8 l/min at 140 bar Connection power: 20 kVA Width: approx. 2,700 mm Depth: approx. 1,780 mm Height: approx. 2,785 mm Machine as transport unit: approx. 3,500 kg EQUIPMENT - Chip conveyor - Coolant -

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual; Weight in kg: 13,330; Duehx Dvyjvwlfhsgst Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport.

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 08 Clad Sintering System, Single, Weight in kg: 9,780 Attention. NH bearings - seaworthy packed, appropriately certified; properly decommissioned, according to applicable protocols, professionally dismantled, ready for container transport. Djhx Dvsvwlddoygsut

Year of construction: 2020, Condition: good (used), Functionality: fully functional, The article consists of two OFC 05 Horizontal OVD Clad Deposition System, Dual Spindle; Weight in kg: 13,700; Attention. NH bearings - seaworthy packed, suitably certified; properly decommissioned, according to the applicable protocols, professionally dismantled, ready for container transport. Duehxevwlbcj Dvygst

Year of construction: 2022, Condition: good (used), Functionality: fully functional, NBG Hall - assembled, weight in kg: 3,750 Documentation available, very good condition; Dushx Dvovwliaoygst