Used F90 for sale (128)

Condition: used, Panel saw F90 - Sliding table length: 3800 mm - Year of manufacture: 1981 - 800 mm right of the blade - 7.5 HP Fpedpfjx E A Tkox Agdjb - 400 mm saw blade diameter - Margin scheme taxation

Condition: ready for operation (used), Technical characteristics Carriage 3200 mm Blade Ø 400 mm Motor 5,5 kW Fixed blade Cutting height : 130 mm Rip fence 1200 mm with fine adjustment Ideal for carpentry Power and Motors Fpsdpfxjuciqyo Agdjb Voltage: 380 V Pluging: Three-phased Power: 6 Kw Motor: 7,5 CV Overall dimensions

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW Fpedpeipvrbsfx Agdsb with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: used, mileage: 139,137 km, power: 198 kW (269.20 HP), first registration: 09/1992, fuel type: diesel, empty load weight: 9,700 kg, maximum load weight: 15,300 kg, overall weight: 25,000 kg, tire size: 12R22.5, axle configuration: 6x6, wheelbase: 3,500 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, Vehicle location: Bovenden, Kz. Haus, switch 16, ABS (anti-lock braking system), differential lock, leaf springs, tow bar air+light Wheelbase: 3500 mm Spreader Gmeiner ICEBEAR 5000WFSE from 2012 for an additional charge of €5,900 net. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Fpsdovllm Uepfx Agdeb - .

Condition: used, mileage: 35,400 km, power: 177 kW (240.65 HP), first registration: 02/1990, fuel type: diesel, empty load weight: 11,965 kg, maximum load weight: 4,035 kg, overall weight: 16,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, Equipment: ABS, all wheel drive, compressor, differential lock, trailer coupling, MAN F90 16.242 FA 4X4 chassis without crane and without superstructure First registration: 2/1990 Original only 35,400 km Short cab with 3 seats 4X4 all-wheel drive vehicle 16-speed manual transmission Leaf spring suspension Fpedpfexu I Amox Agdob Trailer hitch Wheelbase: 3900 mm 6-cylinder engine with 11,967 ccm displacement Tyres: 11R22.5, tread approx. 80% Powerful rear-mounted winch with 5,000 kg pulling force Various storage/roller shutter boxes The vehicle was always stored in the fire brigade/rescue service hall and is in well-maintained condition. Export/net price: 19,900 euros All information subject to change, errors excepted.

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 180 mm Speeds: 3000/4000/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Worktable dimensions: 2053x425 mm, 1200x770 mm Adjustable fence arms Motor power: 5.5 kW Power supply: 400 V Overall dimensions: Fpsdpfox Irv Tsx Agdob Length: 2053 mm Width: 840 mm Height: 1730 mm

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Fpodpfx Aswahrhjgdsb Advantages: Reduced surface area Plug & Play solution Easy access for maintenance No compressed air required Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Fixed shaft Extended tables both left and right Fodpfx Agew Rftijdepb Aigner integral fence Maggi Steff 2034 Power feed unit

Condition: used, mileage: 182,885 km, power: 213 kW (289.60 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 10/1991, next inspection (TÜV): 07/2025, color: white, Equipment: crane, * Truck towing device * Crane superstructure * 40mm Rockinger * 50mm Rockinger * Auxiliary heater (standheating) * Manual transmission Fjdpfx Agoxuzhiedjpb * 182,885 km * 2 sleeping berths * Leather seats ----Internal vehicle number: 11464-----Subject to errors and prior sale.

Condition: used, 2-axis CNC spindle moulder "CASOLIN" model F 90 KTL USED MACHINE - V380/50 - "CE" [code: TOU-051] Complete with: * extended infeed table 1990x770 mm * extendable support bar * tenoning guard (for tools max. diameter 330 mm) * tenoning carriage Fsdpjw Awk Sefx Agdspb * pendant control * support for powered feed unit * 4-roller feed unit "MAGGI" * strip protection device * spindle diameter: 40 mm * spindle speeds: 3000/4500/6000/8000/10000 rpm * motor power: 7.5 kW

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: L0503, Year of construction: 2015, operating hours: 38,589 h, The Fortus 900mc 3D Printer is one of the most precise and powerful FDM printers on the market. With the largest build size among all Fortus® systems, this 3D printer is designed to meet the most demanding manufacturing requirements. The build volume of the Fortus 900mc by Stratasys measures 914.4 x 609.6 x 914.4 mm, covering a wide range of 3D printing applications. The selectable layer thicknesses of 0.178mm, 0.254mm, 0.330mm, and 0.508mm allow for precise adjustments to suit your specific part requirements. For optimal operation of this Stratasys 3D printer, an additional washing station is needed. The Stratasys Fortus 900mc uses the soluble support material SR30 or a Break-Away support material, enabling the creation of intricate models, including undercuts and holes, while reducing the need for post-processing. The FDM 3D printer Fortus 900mc works seamlessly with the popular, free GrabCAD software, making it accessible even for inexperienced users to swiftly and easily fabricate their projects. Make the most of this Stratasys FDM 3D printer model with iSQUARED materials such as ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, and ULTEM 1010. The cartridges for building and support materials each hold either 1510 cm³ or 3020 cm³, ensuring uninterrupted printing. This printer can be installed anywhere without the need for specific setup conditions. No special ventilation is required, as the Fortus systems do not produce harmful vapors, chemicals, or waste. Download the provided site preparation guide to understand the space and connection requirements of the Stratasys Fortus 900mc. This printer is part of the Certified Pre-Owned (CPO) program. Fpodpfjvmpk Hjx Agdjb Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. If you opt for installation and training by one of our certified service technicians, you will also receive a 6-month warranty on your 3D printer. Additionally, we can provide you with all the accessories and consumables, tailored to your purchased 3D printer, from a single source. This means that you take no risks with your purchase.

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Fsdpfel Dvx Eox Agdepb Vice 19 tool holders Coolant

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm Fodpju Nc U Ijfx Agdopb y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: excellent (used), Hermle UWF 900 Year of manufacture (according to circuit diagram): 1992 Heidenhain 407 control Handwheel Network connection Spindle speed: 4,000 rpm Fjdpfx Aoxf Ec Sogdjpb Technical data: X travel: 600 mm Y travel: 400 mm Z travel: 420 mm Tool holder: SK 40 Distance spindle/table: 127 - 567 mm Spindle diameter at front bearing: 55 mm Videos of the machine available!

Condition: good (used), Geared motor, electric motor, electric geared motor -Geared motor: with electric clutch -Engine VEM Type: KPER 90 L 4 -KEB gearbox type: ZG2IE0F90A200 -Speed: 79 rpm Fsdpodlbcnjfx Agdspb -Power: 1.5 kW -Design: B3 -Shaft: Ø 32 mm -Protection class: IP 55 -Quantity: 1 available -Price: per piece -Dimensions: 815/210/H260 mm -Weight: 53 kg

Condition: used, color: other, first registration: 11/2010, Year of construction: 2016, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Fpsdsxywlhspfx Agdjb Please contact us if you can't find what you are looking for.

Condition: good (used), machine/vehicle number: 1984, Year of construction: 2011, load capacity: 9,000 kg, lifting height: 4,040 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,140 mm, total width: 2,050 mm, operation weight: 11,900 kg, additional equipment features: Warning triangle, Battery indicator, Manual sliding cabin, Equipment: lighting, Kalmar ECF90-6 from Uniktruck Fodpfxjtpqf Io Agdepb

Condition: new, The Servomill® UWF 900, a top-tier model in the Conventional Vertical Milling Machines category, exemplifies the advanced engineering of KNUTH. This versatile machine integrates servo-conventional feed technology with a swiveling cutter head, offering remarkable functionality for various milling applications, including tool making and manufacturing. With an expansive work area of 1,235 x 460 mm and a travel range of 900 mm on the X-axis, the UWF 900 combines user-friendly operation with precise performance. The robust design features preloaded ball screws on all axes and high-quality servo motors that facilitate infinitely variable feed speeds, significantly enhancing productivity. Users can effortlessly execute complex tasks with the aid of electronic hand-wheels and joystick controls. Additionally, the machine is equipped with a range of standard accessories, including an automatic lubrication system and LED work lights. Offering high reliability and a long service life, the Servomill UWF 900 is a powerful choice for modern machining requirements. For a detailed quote or to obtain this exceptional milling machine, please request a quote today, and experience the precision and robustness of the UWF series in your own operations. Fedpeuy Id Aefx Agdepb

Condition: ready for operation (used), Trumpf 90-12-06-A4 / 1540720 rotary axis SN: 00001 for Trumpf TruLaser Cell 3004 – without motor, used, in good condition, 100% functional, scope of delivery as per photos. Fpedpfx Agjx Eu U Hedjb

Condition: good (used), Year of construction: 1990, functionality: fully functional, Universal Milling Machine Hermle UWF 900 E Manufacturer: Hermle Model: UWF 900 E Year of manufacture: 1990 Factory No.: 1893 Technical Specifications Travel paths: X-axis (longitudinal travel): 600 mm Y-axis (cross travel): 500 mm Z-axis (vertical travel): 450 mm Quill stroke: 100 mm, extendable Swivelling range of spindle head: ±90° Milling spindle front bearing diameter: Ø 55 mm Tool holder: SK40 DIN 2080 or SK40 DIN 69871 or BT40 Table size (universal clamping table): 420 x 650 mm, extendable to 935 mm NC rotary table (4th axis): Ø 380 mm, tiltable ⚙️ Equipment / Accessories: Vertical milling head with quill and fine adjustment Universal planer and angular milling head Fpsdox Nn A Espfx Agdob Heidenhain control Especially suitable for Single-part and small-batch production Tool and mould making Precision and complex milling operations Condition Well-maintained, fully functional tool milling machine made with precision German engineering. Immediately ready for operation – ideal for workshops, training centers, or manufacturing companies with high quality standards.

Condition: good (used), centrifugal pump, water pump, circulation pump -Flow rate: m³/h -max. H: mWs -Engine power: 1.85 kW -Speed: 1400 rpm -Pipe connection inlet: DN80 -Pipe connection outlet: DN80 Fjdpecxtbcefx Agdjpb -Dimensions: 525/270/H510 mm -Weight: 55 kg

Condition: used, color: other, first registration: 11/2010, Year of construction: 2016, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Fsdjxywkkjpfx Agdopb Please contact us if you can't find what you are looking for.

Condition: used, Year of construction: 1995, operating hours: 53,000 h, functionality: limited functionality, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 20 rpm, mount diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, controller manufacturer: Heidenhain, control type: CNC control, Equipment: documentation/manual, Machine is under power and available for inspection in Villingen-Schwenningen. Heidenhain TNC 426 control system including glass scales! The machine functions except for the tool changer. SK40 tools can be changed manually. Handwheel is available. Documentation, wiring diagram, and data backup are included. English user manual is also available. New color monitor and LED lighting have been retrofitted. Transport and loading can be organized by us. Potentially suitable as a spare parts donor (control unit, motors, gearboxes, scales, etc.). We have not made any real attempts to repair or thoroughly inspect the changer yet. Loading by forklift is not an issue. Fedpfx Agjwzxwkedspb Sold as seen. Warranty has long since expired.

Condition: used, color: other, first registration: 11/2010, Year of construction: 2016, Serial number: HSF 9010 ECO-P We have a stock of >100 axles. Fpodpexywfbsfx Agdsb Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 12/2008, Year of construction: 2008, Serial number: HSF 9010 ECO-P Fpsdpox Nfx Rjfx Agdsb We have a stock of >100 axles. Please contact us if you can't find what you are looking for.