Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Profilkantenschleif and milling machine, edge grinding, edge grinder, grinding machine -Copying device -2 x heads power 1,5 kW Speed 3000-6000 R/min -1 x sanding head Power 1,1 kW Speed 500-1500 R/min Milling and grinding heads in the thickness adjustable Uyv3rcnn7 -Max workpiece thickness 40 mm -Max corner radius r 40 mm Dimensions 1200/1600/H1520 mm Weight 782 kg more
6
Special machine for shaping and sanding or sanding and buffing of round tops with constant diameter, also half round and half round with 2 parallel sides. Min/max workpiece diameter: 800 / 2200 mm. Workpieces are positionned toward 2 pneumatic controlled fences on a vakuum turntable. Feedspeed of workpieces adj. from 5 to 25 m/min Equipment: Smuudl8f - 1 x universal spindle, 90° turnable, with pneumatic jump controll, mounted on a vertical post, about 1 m. high, with vertical adjustment over a ... more
11
Edge thickness of 3 mm, thickness of min. 16 mm - max 50 mm, the smallest inner radius R = 40 mm, min. 150 mm, width workpiece length of min. 300 mm, HF Fräsmotore 2 x 0.37 kW / 400 V / 50 Hz, speed 12,000 rpm (high-frequency), end trimming saws unit 1 x 0.37 kW / 400 V / 50 Hz , Speed 12,000 rpm (high-frequency), suction nozzle D = 120 mm, drive systems, pull-out workpiece support, work table height 865 mm, dimensions L = 1900 mm, B = 850 mm, H = 1200 mm, weight approx. 200 KG Bcsk0dfwye more
5
Laminate trimmer / RADIUS milling cutter in good fully functioning state maximum edge thickness 3 mm maximum workpiece height approx. 50 mm min. inner radius approx. 40 mm power consumption 1,5 kW speed (milling) 12000 RPM. Electr. Connection 230/400 V, 50/60 Hz work table height 865 mm dimensions (L x W x H) 1006 x 710 x 1160 mm weight approx. 188 kg pull-out workpiece support 2prahi more
6

Mitre milling machiens Lehbrink WL 38

Petershagen, GermanyGermany dealership location
6478 km
1991
used
Manufacturer: Lehbrink , Type: WL 38, Year: 1991, Control: Programm, Work piece winding off lenth max. mm : 3000-550, Through running lenght (Cutting lenght) max. mm: 550, Work piece thickness min mm: 10, Angular adjustable saw supports: yes, Pneumatically going in/out: yes, Fräsmotore Stk: 4, Power of milling engines kW: 4,2, Fräsmotore U/min: 6000, Automatical foil glueing device: yes, Scoring unit for foil glueing: yes, Length stopper: yes, Year :1991 Lkcoj more
9
Molding RADIUS cutter used internal engine number: m2599 manufacturer Hebrock type HFF 08 Ma. Number 08/161 year 1996 power 1.5 kW Max edges thickness 3 mm maximum workpiece height approx. 50 mm min. inner radius approx. 40 mm speed 12,000 rpm. Weight 200kg item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. We will gladly send you more photos by E-Mail. A forklift/crane for loading is available. Kuimpgkx We reserve the right to a s... more
5

edge trimming machine BRANDT F 13

Heule, BelgiumBelgium dealership location
6178 km
2001
used
Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm M2lxx Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm more
1
Kantenfräsmaschine Fabrikat: Hebrock Typ: TF 03 Baujahr: 1993 Ih3s3mlp more


Edge-mills
daily

New machines via email!

Stay updated!
6

"Edge processing automat" HEESEMANN "UKP 22"

Klipphausen, GermanyGermany dealership location
6821 km
1989
used
"Edge processing automat HEESEMANN UKP 22 Aggregates entirely: 7 Moulding aggregates: 1 Sanding aggregates: 5 Free spaces: 1 F9xllfl Feedrate max m/min: 30 Continuously variable feed: Yes Aggregates oscillating: Yes Sanding brush: Yes Sanding belt: Yes Clamping system: Feed rollers Total connection kW: 27 Weight kg: 9.500" more
2
Width x length x height: 1.1 x 1.3 x 1 m Weight approx. 0.8 t Ndpqh more
8
 Start Chat

Corners shaper, Kantenfaeser CHM Heßler MZ 100 90F mit Wegoma KFR130N

40764 Langenfeld (Rheinland), DeutschlandGermany
6405 km
2012
good condition (used)
Universal milling machine to manipulate the longitudinal edge and head By milling the longitudinal edge and also to copy the end edges slowing thrust ring Drive motor 230V, 750 Watts 14,000 – 30,000 U/min, adjustable CE mark Ghx7gjxvw Has virtually no signs of wear. Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see... more
1

flush trimming machine BRANDT F 10

Heule, BelgiumBelgium dealership location
6178 km
1988
used
Stationary flush trimming machine for straight or curved pieces Workpiece thickness: 12 - 60 mm Workpiece width: min 30 mm Vpzcuotgh Edge thickness: 1 mm Motors: 2 x 0,26 kW more
1

Edge milling machine Biesse Speedy 90

Gradenfeld/Wundschuh, AustriaAustria dealership location
7168 km
1998
excellent (used)
Small edge milling machines for the machining of straight and curved workpieces 2 high frequency motors, adjustable vertically against each other Performance data Edge thickness of 3 mm Workpiece thickness of 60 mm Edge height: min. 12 mm; max. 60 mm Motor power: 0,736 kW Air pressure: 6 bar Bbih7vwumx Dimensions: 900 x 750 x 1150 mm (Lxwxh) Weight: 110 kg Extremely user friendly machine for flush cutting of the edge straight and shaped workpieces. The machine is suitable for vi... more
2

Edge milling machine/flush cutter HOLZ HER UF 362

Tauberbischofsheim, GermanyGermany dealership location
6653 km
used
Edge milling machine/flush cutter wood produced type UF 362, 7,000 rpm. Baqbu7nfsw more
6

"Corner rounding machine" ARMINIUS "ST 16"

Klipphausen, GermanyGermany dealership location
6821 km
1991
used
Xrwrqcken "Corner rounding machine ARMINIUS ST 16 Aggregates entirely: 2 Moulding aggregates: 1 Sanding aggregates: 1 Tracing device: Yes Profile sanding disc: Yes Operating status: still in production use Condition: good" more
4
HOLZHER BUeNDIGFRAeSE Hsmorgf WITH 2 PCS. WENDEPLATTENFRAeSER and FASE O/U GOOD GENERAL CONDITION more
6
M.Nr 1988, Bj. 1966, 380V -4,6 A - 2,2 Kw - Sicherung 20 A, Buendigfraesen Oben/Unten, Ve9yhqvtq 50mm Falzkopf, Absaugstutzen 2 x 80mm, Tischauflage 540 x 1400 mm Gewicht ca. 280 kg Aussenmasse: B/T/H ca. 1400 x 950 x 1250 mm more
1

Corner Rounder Hartmann-Maschinen SF6

Huellhorst, GermanyGermany dealership location
6457 km
2014
as good as new (ex-display)
Infinitely variable speed control 28,000 rpm, Collet 6 mm. In the suitcase. Cejxperg more
5

Brandt edge router Brandt

Rietberg-Mastholte, GermanyGermany dealership location
6469 km
1977
used
well-preserved Brandt edge router, built in 1977, serial number 56-495, immediately ready for use. Cnqzq2tu more
3
Edge milling machine/flush cutter wood produced type UF 362 feed type ETS, feed: 2-30 m / min. 7stn938bg more
1

Edge router Brandt F 10

Bad Oeynhausen, GermanyGermany dealership location
6472 km
1988
used
-with side cutting saw Jxviffrqw more
4

edge trimmer HOLZHER UF 362

St. Peter, AustriaAustria dealership location
7166 km
used
edge trimmer for overlapping edges motor approx. 3,0 kW tool speed 7000 RPM. 2 pcs suction hoods Ø 80 mm Bldocjsiu machine weight approx. 340 kg machine dimensions (L x W x H) = 1000 x 1250 x 1400 mm incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the ... more
6
Description: You offer Kölle noble brand here on a super functional edge milling machine. The machine is in good condition, with minor signs of use. It is fully functional. This machine provides you with a precise and accurate woodworking. It is very robust and very hard. Just quality. She is easy to handle and easy to use. You can easily make numerous adjustments in terms of height and depth. Technical data: Brand: Kölle Type: FKF Table length 3000 mm Muaylk Table heigh... more
1
Edge Abkappen thrower HolzHer Built in 1978 Weight approx. 220 kg L x W x H: 80 x 60 x 150 cm The machine is in good condition, ready to use. Vowkg Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! more
1
Number of processing stations: 12, 2 edge banding stations, 2 edge magazines with 32 magazine slots each, including plate conveying system MEINERT, roller conveyor, curved belt, control cabinets, control panel and accessories. Ce2wfbfc more
2
This laminate trimmer is directed in 1997 and fully functional. 9rydzxurp more
3

Front edge router Grum-Schwensen ST 100

Bad Oeynhausen, GermanyGermany dealership location
6472 km
1992
used
for milling of radii of solid wood and laminated parts Bui7z more
6
Description: They provide here a super functional to glue thrower, brand of holzher, which is known for excellent quality of your. The unit is in great condition. Smaller not significant signs of wear are present. The pictured accessories are included. Technical data: Cmnc0wj3 Brand: Holzher Type: UF 362 Built in 1979 Flush milling Yes Workpiece thickness max mm 70 Main motor kW 2.2 Dimensions Lxwxh mm 1400 x 910 Approx. weight kg 285 more
1
Kantenbearbeitungsautomat - schleifen/fräsen Fabrikat: REHNEN Typ: KBA Neumaschine Technische Ausstattung: Spannung: 400 V, 50Hz Anschlussleistung: 6 kW Motorleistung Kantenschleifaggregat: 3 kW Schleifbandmaß (Kante): 150 × 2000 mm Stufenlose pneumatische Oszillation, verstellbar: 30 ?130 mm Motorleistung Fräsaggregat: 0,55 oder 1,1 kW Motorleistung Profilschleifaggregat: 0,37 kW Schleifbandmaß (Profil): 30 × 1960 mm Maschinengröße: 1000 × 3600 mm Vorschubgeschwindigkeit: 2 ?10 m/min Materials... more


Edge-mills
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close