Second-hand machinery for sale (2,405)

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-travel: 730 mm Y-travel: 730 mm Z-travel: 880 mm Control: M 730 BM MAPPS IV Main spindle max. spindle speed: 12,000 rpm Drive power - milling spindle: 15 / 11 kW max. torque: 102 Nm Tool holder: SK 40 Distance from spindle center to table: 80 - 800 mm Distance from spindle nose to table center: 70 - 950 mm Pallet changer Number of pallets: 2 Pallet size: 500 x 500 mm max. workpiece weight: 500 kg max. workpiece diameter: 800 mm max. workpiece height: 1,100 mm Pallet changing time: 9.5 s Indexing time: 1.49 s B-axis (table): 1° Dceb Hdwaevpryiokjg Tool changer Number of tool positions: 60 slots Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with free adjacent box: 170 mm Max. tool length: 550 mm Tool - tool change time: 0.9 s Feeds Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Jog feed rate: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Machine weight: approx. 11.1 t Space requirement: approx. 5.5 m x 3.0 m x 2.8 m EQUIPMENT - Documentation - Chip conveyor - Coolant system - Internal coolant supply (IF Knoll) - Tool changer - B-axis - Pallet changer - Oil mist separator - Tool breakage control (magazines) - Thread milling

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Dcjb Hdwaovn Ny Dskjg Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: good (used), DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. We provide disassembly and removal of machines from the factory hall. Dsb Hjnvfmnedwakscg For sale are 6 machines similar this one, and many more different machines from the shoe manufacturing plant.

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 557, grinding length: 1,200 mm, grinding width: 450 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding area: approx. 450 x 1,200 mm Magnetic plate dimensions: approx. 420 x 1,200 mm Grinding height: 450 mm Deb Hjvr Tm Nedwakscg Component height: 370 mm Grinding wheel Diameter: up to max. 400 mm Bore: 127 mm Width: max. 100 mm Drive Spindle power: 17 kW (according to type plate) Additional: incl. cooling water system A 10-ton hall crane can be used for loading.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, Functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Deb Hdwsvt Tyrsakscg Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, Functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Dob Hdjvtmhpewakocg Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 163123, travel distance X-axis: 3,300 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS CNC control: Siemens 840D retrofit in 2014 X-axis travel: 3,300 mm Y-axis travel: 620 mm Z-axis travel: 800 mm (only with swivel bridge removed) Table Clamping surface: 3,500 mm x 650 mm Clamping surface with swivel bridge removed: 1,600 mm x 650 mm Spindle Speed range up to: 10,000 /min Tool holder: ISO SK 40 Axis drives Rapid traverse: 25,000 mm/min Tool magazine Magazine type: chain magazine Number of tool positions: 60 MACHINE DETAILS Connection voltage: 400 V Mains frequency: 50 Hz Length x width x height: 7,700 mm x 3,677 mm x 3,532 mm Machine weight: approx. 17,500 kg EQUIPMENT - Chip conveyor - IKZ 40 bar - Control cabinet air conditioning - Control system retrofit in 2014 - Linear guides X-axis and Y-axis including roller guide carriage replaced in 2015 - Linear guides Z-axis including roller guide carriage replaced in 2017 - Main spindle re-bearing including all Heidenhain encoders and overhaul of the hydraulic tool clamp in 2015 - KGT X-axis in 2021 - KGT Y-axis in 2016 - KGT Z-axis in 2018 - Worm gear Fibro Plan in 2014 - A complete zero-point clamping system is also included with the machine. Dceb Hjvprr Sedwaksg

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 25 mm, travel distance Y-axis: 286 mm, travel distance Z-axis: 35 mm, table width: 200 mm, product height (max.): 100 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (option W20) Number of discs: 1 Table diameter: 200 mm Workpiece height: 100 mm Control: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm Dcob Hdovr Dtgowakog X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of the 4 axes, cylindrical interpolation of the 2 robot axes Head motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Completion Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirement (L x W x H): approx. 1.83 x 2.04 x 2.1 m MACHINE DETAILS - Loading and unloading robot - Fire protection device

Condition: refurbished (used), Year of construction: 2017, operating hours: 100 h, Functionality: fully functional, feed length X-axis: 294 mm, feed length Y-axis: 211 mm, feed length Z-axis: 144 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Condition: Refurbished in 2022, with new print head Operating hours since refurbishment: approx. 100 h Certification: CE certified Print specifications Build space: 294 x 211 x 144 mm (X, Y, Z axis) Layer thickness: 0.032 mm Resolution: 800 x 900 x 790 dpi (X, Y, Z axis) Print modes: HD / UHD Material options VisiJet® M2 Armor M2G-CL: clear, flexible, ABS-like (HD + UHD) VisiJet® M2 ProFlex M2G-DUR: clear, flexible, polypropylene-like (HD + UHD) VisiJet® M2R-GRY: opaque, gray, rigid (HD + UHD) VisiJet® M2R-WT: white, rigid (HD + UHD) VisiJet® M2R-BK: black, rigid (HD + UHD) VisiJet® M2R-CL: clear, rigid (HD + UHD) VisiJet® M2R-TN: high contrast, rigid, dental (HD + UHD) Djbovtl Nxj Hdwakjcg VisiJet® M2 EBK: opaque, black, elastomer (HD) VisiJet® M2 ENT: transparent, amber, elastomer (HD) VisiJet® M2E-BK70: opaque, black, elastomer A73 (UHD) VisiJet® M2S-HT90: transparent, heat-resistant up to 90 °C, biocompatible (UHD) VisiJet® M2S-HT250: translucent, amber, heat-resistant up to 250 °C (UHD) VisiJet® M2 SUP: Support material MACHINE DETAILS Weight: approx. 211 kg Power connection: 230 V, 16 A, 50 Hz Data connection: Ethernet TCP-IP, USB port EQUIPMENT - Refurbished with new print head - Easy Clean System from 3D Systems - Additional build platform - CE-certified

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 5019-03, center height: 325 mm, grinding length: 1,600 mm, grinding wheel diameter: 450 mm, spindle speed (max.): 2,770 rpm, grinding spindle speed: 650 rpm, pivoting range: 90 °, Machine with comprehensive accessories! Condition: Very good, works with very high precision - general overhaul in 2001 No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840D Center distance: 1,600 mm Center height: 325 mm Longitudinal slide Table speed max.: 0.06 to 10,000 mm/min Automatic travel: 0.001 to 1,750 mm Dcob Hovrzu Iedwaksg Max. inclination of the table: 8° Cross slide Swivel range: ± 45° Grinding depth (plunge grinding): 200 mm Travel speed: 0.06 to 10,000 mm/min Grinding headstock Type: S50-12 Grinding wheel dimensions: 450 mm x 80 mm x 203 mm Drive: 7.5 kW Speeds: 1,240 to 2,770 rpm (8 Steps) Swivel range: 0 to 210° Workpiece headstock Swivel range: 0 to 90° Speed range: 15 to 650 rpm (freely programmable) Drive power: 2.2 kW MACHINE DETAILS Total connected load: 22 kW Machine weight: 7 t EQUIPMENT - Internal grinding device - Full enclosure - Extraction system - Cooling unit Submitting a bid obliges you to pick up the machine on time by March 1st, 2025!

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Loading modules: 1 module Processing modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnosis: available Programming: ISO code, simulation using CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to machining time, manual, with 3-axis handling or robot Part feed: Paternoster / stacking magazine Workpiece change (chip-to-chip time): approx. 6 s Axes Travel path X: 572 mm Travel path Y1/Y2: 322 mm Travel path Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N B-axis speed: 1,000 rpm C-axis speed: 500 rpm B-axis acceleration: 52 rad/s² C-axis acceleration: 90 rad/s² B-axis torque clamped: 1,000 Nm B-axis torque unclamped: 287 Nm C-axis torque clamped: 300 Nm C-axis torque unclamped: 187 Nm Work spindle Tool holder: HSK 40-A Dob Hovt Tw Redwakecg Outer diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% ED): 85 Nm Power (S6 45% ED): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Activation: pneumatic, 6 bar Tool changer Tool disks: can be externally pre-equipped with location coding, diameter: Ø 290 mm Tools (2 disks with 12 spaces) per machining module: 22 Weight of tool disk: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. Tool diameter: 63 mm Max. tool diameter with free space: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. weight of tools on the disk: 15 kg Positioning time per tool step: 250 ms Tool holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Dimensions of the machine (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per processing module: approx. 4.5 t Weight per loading module: approx. 2.5 t Safety system Doors: Locking switches on all doors to the work area Axis control: Control of all axes with one controller CNC and PLC: integrated on one module Interfaces: sercos 16 Mbaud, Profibus DP, Ethernet Transformation: 5/6-axis transformation Tool correction: 3D tool path correction Look-ahead: up to 1,000 sets Connection values Current consumption: 60 A Power: 40 kVA Compressed air: min. 6 bar Voltage: 3 AC, 400 V Frequency: 50 Hz

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 186854001, TECHNICAL DETAILS Saw blade length: 4,250 mm Dcsb Hdetrdmiowakeg Saw blade width: 34 mm Total height: 1,950 cm Overall length: 4,120 cm Total width: 2,450 cm Cutting speed: 150 mm/min Cutting range: 500 mm Cutting range round at 45°: 300 mm Cutting range round at 90°: 305 mm Cutting width: max. 500 mm Square cutting range at 90°: 280 mm Cutting range square at 45°: 270 mm Cutting angle range: 30 - 150 degrees Roller conveyor at the entrance: 9 meters (to feed the machine) Roller conveyor at the saw outlet: Retractable 1-meter roller conveyor MACHINE DETAILS Motor power: 2,200 W Type of input current: three-phase Input power: 2.2 kW (2.99 hp) Table height: 845 mm Total weight: 2,100 kg Cutting height: max. 305 mm Input voltage: 400 V EQUIPMENT Emergency stop switch sensors Saw band brushes WIKUS saw bands Documentation/Manual

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 275 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, TECHNICAL DETAILS Control: Siemens 540 D Turning diameter: 400 mm Turning length: 650 mm Travel X: 275 mm Travel Y: +50/-40 mm Djb Hdjvprq Ijwakocg Travel Z: 700 mm Max. rapid traverse X: 15 m/min Max. rapid traverse Z: 24 m/min Turning spindle 1 Speed: 5,000 rpm Chuck size: 210 mm, 250/315 mm Spindle power: 18 kW, 22 kW Torque: 150 Nm, 250 Nm Turning spindle 2 Max. speed: 6,000 rpm Chuck size: 165 mm Spindle power: 10 kW Torque: 80 Nm Tailstock Taper mount: MK4 Quill diameter: NC-Body Tailstock stroke: 570 mm Turret Number of tools: 16 Tool holder: VDI30 Rotating tools: 16 (option) Max. speed: 5,000 rpm Power (60%): 6 kW Torque (60%): ~30 Nm MACHINE DETAILS Weight: 5,000 kg Dimensions: 2.50 m x 1.6 m x 2.5 m

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, HIGHLIGHTS - CombiLine laser marking system with high precision and easy operation - for a variety of complex laser marking applications - complex shaped parts can be easily marked - includes a motorized X, Y, Z axis for automatic positioning and focusing TECHNICAL DETAILS MACHINE DETAILS Dcob Hdjvrxmnswakjg EQUIPMENT - Windows 10 with software and license - Pilot laser - Touch display - Automatic door opening - Original cabin according to protection class 1 - Commissioning with instructions - 1 year warranty

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, HOMAG single-sided edge banding machine type KL39/9C/S 3D Dob Hdwjrn Sp Ssakecg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 1159547, travel distance X-axis: 3,683 mm, travel distance Y-axis: 2,159 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Machining center with extended Z-axis and magazine size as well as steel table and other additional equipment No reserve price - guaranteed sale at the highest bid! Bidding obliges you to pick up the machine on time by January 31, 2025! TECHNICAL DETAILS X-axis: 3,683 mm Y-axis: 2,159 mm Z-axis: 610 mm - extended Distance spindle nose - machine table (max.): 343 mm Spindle nose to table (min.): 64 mm Spindle Max. rated power: 11.2 kW Max. speed: 8,100 rpm Max. torque: 65.0 Nm at 1,500 rpm Drive system: Direct Speed, Belt Drive Cone: CT or BT 40 Table Length: 3,708 mm Width: 1,829 mm Thickness: 25 mm Material: Steel - extended! Max. load capacity on table (evenly distributed): 2,722 kg Space between columns: 2,184 mm Hole pitch: M12 thread Feed rates Max. feed for cutting: 20.3 m/min Rapid traverse X: 20.3 m/min Rapid traverse Y: 53.3 m/min Dobjvpf Imj Hdwakscg Rapid traverse Z: 27.9 m/min Axis drives Max. thrust force X: 11,210 N Max. thrust force Y: 4,537 N Max. thrust force Z: 9,119 N Tool changer Type: Carousel Load capacity: 20 tools - extended Max. tool diameter (full): 89 mm Max. tool weight: 5.4 kg MACHINE DETAILS Coolant tank capacity: 360 l Compressed air connection: 113 l/min at 6.9 bar Min. air pressure: 5.5 bar Dimensions - Shipping Pallet: 575 cm x 348 cm x 295 cm Export box: 575 cm x 348 cm x 303 cm Weight: 10,887 kg EQUIPMENT - WIPS-R_GR-712 Intuitive wireless measuring probe system, Renishaw, including macros - CS-GR_GR-712 Cooling system with 360 liter coolant tank and 0.6 kV pump - HSM_GR-712 High-speed machining - C_GR-712 Portable control panel RTAP-3_GR-712 Cable drilling

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS Dcsb Hdovt Tu Njwakeg X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 12030326, travel distance X-axis: 810 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, table width: 900 mm, table length: 400 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! 2024 serviced TECHNICAL DETAILS X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Spindle tip to table: 115 mm Spindle center to column: 425 mm Table Table size: 900 x 400 mm T-slots: 14 x 3 x 125 mm Max. table load: 300 kg Table height: 815 mm Feed rate X,Y axis: 36,000 mm/min Z axis: 30,000 mm/min Spindle Spindle taper: ISO SK40 Spindle speed: 10,000 rpm Motors Spindle motor power: 10 kW Servo motor power X,Y,Z: 2.3 / 2.3 / 3.3 kW Tool changer (ATC) Type: Arm Tool capacity: 24 tools Max. tool diameter: Ø 150 mm (with free adjacent positions) Max. tool weight: 7 kg Max. tool length: 300 mm Machine accuracy Positioning accuracy: ±0.005 / 1000 mm Repeatability: ±0.003 / 1000 mm Dsbjvupnbs Hdwakjcg MACHINE DETAILS Air pressure: 7 kg/cm² Energy requirement: 20 kW Machine dimensions (LxWxH): 3600 x 2000 x 2500 mm Machine weight: 3,500 kg Voltage and energy Voltage: 3-phase, 380-400 V AC Frequency: 50/60 Hz Total power: 20 kW Cable specifications: Main voltage and earth cable min. 8 mm² EQUIPMENT - Electronic handwheel - Fully enclosed splash guard - Powerful AC spindle motor - Steel telescopic covers for X, Y and Z axes - Halogen work lamp - Automatic central lubrication system - Control lamp - Spindle blow-out device - Screws and feet for leveling - Manual and parts list - Machine is sold without vice and tools

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,710 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 3,000 kg Load center: 500 mm Length: 2,665 mm Width: 1,290 mm Weight: 4,400 kg Lift mast Dsb Hdsvmn Nzswakjcg Mast type: Triplex Lifting height: max. 4,710 mm Overall height: max. 2,160 mm Free lift: max. 940 mm Fork carrier: FEM2A Fork length: 1,200 mm Fork dimensions: 45 x 122 x 1,200 mm MACHINE DETAILS Front: Superelastic 28x9-15-14PR Rear: Superelastic 6.50-10-10PR Drive type: LPG Engine: Hyundai G424IE Gearbox: Automatic/converter Operating hours: 0 EQUIPMENT - Side shift: fork carriage 1,130 mm, side stroke: +/- 100 mm - Strobe light - Rear grab handle with horn button

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, saw blade diameter: 550 mm, saw blade speed: 3,000 rpm, cutting length (max.): 3,350 mm, saw blade bore: 33 mm, saw blade width: 5 mm, swivel angle A-axis (min.): -23 °, swivel angle A-axis (max.): 45 °, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Saw blade diameter: 550 mm Saw blade bore: 33 mm Saw blade width: 5 mm Workpiece length: 300 - 3,350 mm Swivel range: -22.5° to +45° (servo-controlled) Type: carbide saw blade Saw drive Motor power: 3 kW Speed: 3,000 rpm Feed drive Power: 0.75 kW Speed: 3,000 rpm Cutting area Hydro-pneumatic feed control: available Cutting zone protective covers: available Horizontal and vertical pneumatic clamping devices: available Lubrication system Cooling lubrication system: available Operation and automation Touchscreen control panel: Smart Touchscreen Panel PC Integration of the digital loading conveyor: available MACHINES DETAILS Dimensions: 4,268 x 1,905 x 1,600 mm Weight: 440 kg Air pressure: 6 - 8 bar Air consumption: 98.5 l/min Djb Hdwaovvv Ahskocg Compatibility and control Compatibility with cutting lists: available Safety operation (two-hand control): available Data transfer: Ethernet and USB

Condition: not inspected (used), Year of construction: 2004, Functionality: unexamined, HOMAG edgebanding and processing line, KF 61/08/QA/25 edgebanding machine, KF-63/08/QE/15 edgebanding machine, Optimat TDL 310/25/12 turntable, year of manufacture 2004, Dcsb Hdwjrn Sl Ioakeg L=25 m

Condition: good (used), Year of construction: 2011, operating hours: 15,971 h, Functionality: fully functional, laser power: 4,000 W, laser hours: 15,971 h, overall weight: 22,500 kg, sheet thickness (max.): 8 mm, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Dcebeu Rbg Eo Hdwaksg Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 210/210002, travel distance X-axis: 2,500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 18,000 rpm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 90 °, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis (longitudinal): 2,500 mm Y-axis (transverse): 200 mm Z-axis (vertical): 180 mm A-axis (profile rotation): -90° | 0° | 90° Positioning speed X-axis: 64 m/min Y-axis: 64 m/min Z-axis: 40 m/min A-axis (rotation): 60°/s Spindle Maximum power: 4.5 kW Maximum speed: 18,000 - 24,000 rpm Tool holder type: ISO 30 Cooling type: electric fan Compressed air Pressure: 6-8 bar Flow rate: 18 gal/min Tool magazine Manual tool magazine: available Maximum tool capacity: 4 Machining units Direct tool use (top surface): 3 Profile positioning Right-hand pneumatic profile reference alignment: available Control Touch screen: 15" industrial PC Dobjvvvnwo Hdwakocg Working area Standard number of clamps: 4 Manual clamp positioning on X-axis: available Lubrication of the tool processing area: present Safety barrier (light barrier): optional MACHINE DETAILS Total weight: 1,650 kg Total length: 3,415 mm Total width: 1,615 mm Total height: 2,020 mm Electrics Power: 9.6 kW Current: 30 A Voltage/frequency: 400 V / 3~, 50 - 60 Hz EQUIPMENT - Documentation and manual - Manual clamping positioning - Industrial PC with Windows-based touchscreen interface - Data transfer via remote network connection, Ethernet and USB - High processing capacity to increase efficiency - Automatic lubrication in the processing area

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 170 mm, number of slots in tool magazine: 12, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis travel: 3,280 mm Y-axis travel: 1,320 mm Z-axis travel: 170 mm CNC control: BiesseWorks Working beams: 6 pieces Suction cups: 18 pieces Tool magazines: 12 MACHINE DETAILS Total weight: 3,000 kg Electrics Input voltage: 400 V Type of input current: AC Required power: 25 kW EQUIPMENT - Safety mats Deb Hdwsvvvcboakjcg - BECKER vacuum pump

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet Dobsvvu S Is Hdwakjcg - Fencing and protective doors