Plastic tube filling machine

Axomatic srl Optima 900 Matic

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20037E2006, total width: 700 mm, total length: 700 mm, total height: 1,540 mm, type of input current: three-phase, filling weight (max.): 250 g, filling weight (min.): 5 g, compressed air connection: 6 bar, overall weight: 500 kg, year of last overhaul: 2025, Used Axomatic AXO 700 tube closing machine suitable for filling and closing aluminium tubes. Iiodpfxewnrrbe Ad Rjb Method: This machine automatically fills the tubes, closes the aluminium tubes through 4 folding stations, puts a code in the seal and automatically ejects the tubes. The tubes are fed and oriented manually. This machine is set up in our showroom where we are happy to demonstrate the machine. Contact us for an appointment. Technical details: - Min/Max diameter aluminium tubes: 13 – 42 mm. - Tube length from 60 to 250 mm. - The tube holder with tube is lifted 55 mm over the filling pipe during filling. - Min/Max dosage: 5 – 250 ml. - The dosage quantity can be set outside the machine and can be read on a counter. - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity is partly dependent on the operator, the tube quality and the viscosity of the product to be filled. - Electric drive by means of an electric motor of 0.37 kW, 380 Volt, 50 Hertz. - All product contact parts are made of stainless steel 316, suitable for pharmaceutical and cosmetic products. - Rotating table, adjustable in height, with readout of the set heights. - No tube/no filling device. - Coding unit for the tubes - Automatic ejection device for the tubes. - 7-station table. - Standard hopper with lid 55 liter capacity. - Machine frame and plating are made of stainless steel and is equipped with an anti-drip lock on the base, so that no product can enter the drive section. - Stepless speed control from the dashboard. - Security doors and casing made of stainless steel frame with plexiglass and door security. - Direct machine drive without chain. - Electric control box housed in the frame of the machine.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, input voltage: 400 V, total length: 3,050 mm, total width: 95 mm, total height: 1,550 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Glorystar All New Small Fiber Laser Cutting Machine | GS-3015C | 1500-6000W The machine fits in a container. This GS-C Series SMALL FIBER LASER CUTTING MACHINE is designed for cutting small-sized metals, with the working area of 1510 (3′x5′) and 3015 (5′x10′) to choose from. Thanks to its small and compact design, it can save space and cost for you. The machine includes: Closed Type Structure Pull-out Worktable Advanced Fiber Laser Source：IPG/MAX/RAYCUS/GLORYSTAR Brand Optionl Auto-Focus and Collision Protection Cutting Head FSCUT Cutting System Automatic zoning dust removal High-strength Welded Bed Max Acceleration: 1G BOCI cutting head Iedpeuc Nd Tofx Ad Rjib SKR Linear Guide Rail X/Y Axis High-Precision Rack: LEADRACK Electric Control Proportional Valve: Felton/SMC Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Year of construction: 2023, condition: new, Semi-automatic auger filler for 100-5000g. Suitable for dosing and filling powdery products. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres; filling weight: 10-5000g (change of dosing screws required); stainless steel version AISI 304; servo motor; packaging accuracy: 1-2% (depending on product and total weight); max. speed of the machine in neutral: 50/minute; current: 1.5kW, 3P, 380V; machine dimensions: L600xW800xH1000mm; weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainless steel pipe. The feed hopper holds 230 litres and is equipped with a vibration motor for uniform product flow. - Specifications screw conveyor: Conveying capacity depending on product: up to 3 m³/h; standard angle: 45° (can be customized 30-60°); pipe diameter: 141mm; power: 1P, 380V, 3kW; machine dimensions: size depends on the customized end system (hopper, conveying length and angle can be adjusted); weight: approx. 150kg. The drawing just shows the auger filler. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iodpfx Adegzp Ekj Reib

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Ijdpoxaph Uefx Ad Rsib

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates Iedpoib A Idjfx Ad Rsib revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is or adjusted to customer needs

Condition: good (used), - Year of construction: 1974/1997 - With tank pressureless 1250 l - Sterile filter, CO2 dosage - Output: up to 6000 l/h - Automatically controlled pump - Piping, with automatic valves, to fillingmachine and CIP - Pressure max. 6 bar Iisdjmu Atxepfx Ad Rjb

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Iedpfexum Alex Ad Reib

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Control system: Siemens Sinumerik 840 D • Working area: 3000 × 1500 × 100 mm • Paint: white RAL 9002 / gentian blue RAL 5010 Iodpsym A Hrefx Ad Rsib • Enclosed machine frame with integrated laser unit • Laser unit: CO₂ laser TLF 5000, high-frequency excited • Cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/waste • Drives: gantry drive combined with linear direct drives • Laser power control • HI-LAS high-pressure cutting • PMS plasma sensor system • High-speed processing with SprintLas • ContourLas for producing small holes • Programmable power cycles • Microweld • Programmable cutting gas pressure control • Laser cutting head with 5" lens and 7.5" lens • Quick-change system for cutting heads • Automatic sheet edge detection • APC capacitive height control and process control • PCS (Process Control System) • Positioning laser diode • Automatic focus adjustment (AutoLas Plus) • Spray device for safe thick sheet processing • Automatic shutdown • Working area lighting • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm • Sinumerik 840D control: • Open PC-based control system • Easy operation • Online help • Diagnostic functions • Maintenance logbook • Technology data • Remote service • Shopfloor programming: ToPs 100 lite • Safety • Multi-beam light barriers • Fully enclosed beam guidance with nitrogen ventilation • Monitoring system • Multi-chamber extraction and compact dust collector • Protective enclosure • Software for Machine System • TruTops Laser postprocessor TCL 3050 – 1 unit • Control system software Cell machine TCL3050 (2nd license) Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed) • Base unit incl. sheet separation device and thickness measuring system • Rack extension (R), interchangeable tines • Pallet handling extension (P) • Separation of thin sheets (1–2 mm) • Third position without unloading station • Unloading station • Stainless steel tines for low-scratch handling • LiftMaster base frame for warehouse connection and double loading/unloading carts • Safety devices: second light barrier circuit • Extended Machine Equipment • Cutting head with 3.75" lens for high-speed cutting • Additional cutting head with 10" lens for thick sheet processing • Automation Preparation (for future upgrade) • Preparation for LiftMaster (standard pallets) • Includes installation, commissioning, and training • Includes warranty, transport, and packaging • Network connection

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZBF02, Equipment: Android Auto, CE marking, The production line can widely used to filling,capping and labeling for various semi-liquid,ointment paste, dense catsup and various materials with granule, such as drinks with fruit, honey,syrup,jam, peanut butter, sesame paste,tomato sauce, peper sauce, etc.Operating principle By the reciprocating motion of the pistons in the material cylinders of the Filling Machine, negative pressure produces in the front chamber of the cylinder so that material could be pumped. The stroke of the cylinder is controlled by a signal valve so as to adjust filing amount and to achieve accurate filling results.Property The Filling Machine with extra functions is designed and manufactured by our factory with reference to the same kind of foreign machines. Iiodpfx Aoxunctod Reb

Condition: like new (used), It is suitable for direct filling of whole solid products of medium and large dimensions in cans, jars, plastic containers, etc. Products: peach halves, pear halves, whole peeled tomatoes, olives, cucumbers, carrots, apricots, artichoke hearts. - Production capacity will depend on the format and the product to be filled. Ijdpfx Asxp Rqpod Rjib