Diaphragm pump

Böllhoff 001.200-DP

Condition: used, approx. 15t available Itjdpfx Agodc A Siozor

Year of construction: 1988, condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Iedpfxjbqi Tbj Agzjtr Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Suction capacity: 700 l/min (delivery rate: 570 l/min) Maximum pressure: 10 bar Pressure vessel: 270 l Motor output: 400V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Upright design for industrial applications, robust belt guard, galvanized compressed air vessel according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, anti-vibration mounts for effective vibration reduction, with refrigeration dryer, optionally with automatic condensate drain for refrigeration dryer and vessel; Itsdpfsd Dhwnex Agzor Various other configurations available

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Ijdpfx Agjg H Nf Rszjtr Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: excellent (used), Kärcher Type: PC 60/130 T / with oil separator (skimmer) attachment kit Kärcher parts cleaner Manufacturing, maintenance, workshops, metal processing - automatic parts cleaners have many applications. The parts cleaners work on the basis of aqueous solutions without solvents. The top loader PC 60/130 T is a fully automatic parts cleaner for parts up to 600 mm in diameter, 310 mm in height and 130 kg maximum weight. The items to be washed are cleaned using three-dimensionally arranged flat jet nozzles using solvent-free, heated Kärcher water-based cleaning agents. The items to be washed rotate on an electrically driven rotating basket during cleaning. The Parts Cleaner PC 60/130 T offers numerous practical details such as an integrated small parts drawer that reliably catches loose parts and coarse dirt particles. Equipment: Operating hour meter Holding ring (stainless steel for turntable) Swivel castors, 2 lockable Timer for cleaning cycle Water level control Oil separator (skimmer) attachment kit See Figure 7 The oil separator (skimmer) extends the service life of the cleaning solution considerably. If the cleaning solution has settled, for example overnight, the oil that has been added floats to the top. The skimmer can now be switched on to remove this oil from the cleaning solution. Specifications Technical data: Pressure (bar/MPa) 1.5 / 0.15 Flow rate (l/h) 4500 Connected load (kW) 5.5 Working diameter (mm) 600 Usable height (mm) 310 Housing / frame stainless steel (1.4301) Tested (by) according to CE Heating power (kW) 4.5 Max. temperature (°C) 80 Adjustable cleaning time (min) 1 / 30 Payload (kg) 130 Sound pressure level (dB(A)) 65 Itedpjfu Ikwefx Agzer Tank capacity (l) 100 Number of current phases (Ph) 3 Frequency (Hz) 50 Voltage (V) 400 Dimensions (D x W x H) (mm) 1080 x 1000 x 1250 Very few operating hours as can be seen in the photo. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: refurbished (used), Various Almatec pumps, plastic and stainless steel versions, all sizes of the AH series, cpl. refurbished and available at short notice Itedpofcy A Hofx Agzsr

Condition: good (used), Dosing pump, 2-component dosing pump Iodpfxsb A Rato Agzetr -for dosing liquid media -2x dosing capacity 0-300 l/h -Pressure: 3 bar -Drive: 0.37 kW/57 rpm Quantity: 1 piece available -Dimensions: 830/400/H340 mm -Weight: 125 kg

Condition: used, functionality: not functional, mileage: 177,262 km, power: 76 kW (103.33 HP), fuel type: diesel, color: orange, Year of construction: 1992, Self-propelled work machine Marking machine: - Iveco - Turbo Daily 49-10 - EZ: 11.05.1992 - 177.262km - 5-speed manual gearbox - el. FH - 6100mm x 2000mm x 2350mm (lxwxh) - Unladen weight: 4,500kg; permissible GG: 5,000kg Marker body: - Double pedals Itedpfeqxudhjx Agzjr - 2nd steering wheel on the right (without function) - Paint tank: Rietberg 820l, 9 bar - Bead tank - Fittings - Compressor Hoses and syringes missing - Drawers - Rear warning device - 2nd hand municipal vehicle You can find a video of this offer at s://youtube/watch?v=KvYYDDwK-0c You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, piston pump Iodpfx Agob A Hcnozstr -Case material: stainless steel -Drive: 11 kW -Speed: 1750 rpm -Pump Vickers PVB10 RSV31 CG20 -Liter output: approx. 36 L/min -Pressure: 210 bar -Hydraulic valve -Filter -Hydraulic tank dimensions: 500/450/H370 mm -Dimensions: 520/330/H600 mm -Weight: 320 kg

Condition: used, total power requirement:6,5 kW dimensions of the machine ca.:0,9 x 0,5 x 1,25 m Itedpfxjcxxp Ue Agzjr