Suction device

Bernardo FT 302N

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Bdjdpfxec Uydas Akxob Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Bdedpfoifnzdjx Akxsb Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: new, Type DC9030 Air delivery 3900 m³/h Inlet diameter 3x100 mm Fan diameter 300 mm Bag capacity 307 l Collector bag ø 480 × 4 3 phases Bodpfsfiiwuex Akxjdb Motor power 2.2 kW Weight 63 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Bdjdpfx Ast Iy Rvekxob Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!!

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Bdedpfx Aehw Ev Sjkxob Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: used, machine/vehicle number: 006850, Max. panel width: 800 mm Bdjdpst H Tvpsfx Akxob Max. panel length: 2500 mm Length of conveyor: 8000 mm Panel return for edgebander: Left

Year of construction: 1999, condition: good (used), Edge banding machine IMA Compact MFA / F / 5212 Year of manufacture 1999 S/N 06601 Bdsdpfjia Naqsx Akxjb max. edgebanding thickness:12 mm min. workpiece thickness:10 mm max. thickness of roll material:3 mm feeding speed : 12 m/min adjustment of the jointing ruler : manual heating time : 10 min Joining unit : Yes, with 2 milling units Automatic roll magazine : Yes Cross cut shear up to : 0.2 - 3.0 mm Solid edge magazine : Yes Preheating of the board by radiant heater autom. gluing with glue tank granulate crosscut saw angle setting by program Multifunctional unit rounding unit/corner copying 2 motors Profile scraper Flat scraper Buffing unit Aggregate display mech.numerical display Control mode via control panel operation selector switch/ push buttons protective hood weight approx.2500 kg Dimension L x W x H 6500 x 1000 x 1600 mm CE marked technical data under reserve

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Bdedpfx Aehk S Sljkxeb Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Bdodpou Ekbnjfx Akxsb Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Bsdpowkba Tjfx Akxjdb Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim