Machining center for doors

BIESSE WINLINE 2Y 1650

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds Blodevu Hgbspfx Ap Isi - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Bljdpfxoyk I U Ae Ap Iei Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz Blsdpsx D D Hmjfx Ap Iei • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders Bedpfox D H Hcox Ap Ioli • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: excellent (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, pivoting range: 360 °, SHW PowerSpeed 5 Travel Paths • X-axis (Bed): 10,000 mm • Y-axis (Vertical): 2,100 mm • Z-axis (Horizontal spindle): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include supply of spare parts, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ---- Bedpfx Apjxgq Ayj Ieli Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used bore milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC fraesmaschinen - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: ready for operation (used), Year of construction: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Machine Benefits Technical Machine Benefits • Positioning workpiece height adjustment: 8-60 mm Bjdpfxjx D Hbtj Ap Isli • Turntable magazine diameter: 750 mm for edging material 0. 4-3 mm in roll • Rotary magazine of edging material with ball bearing, diameter of plate: 740 mm • Gluebox application unit • Trimming unit with two motors: 0. 35 kw (1 ps), 12000 rpm hw saw blades, z 24, d-100x20x3. 2 mm, pneumatic tilting 0°-10° • Upper and lower multifunctional milling unit // upper and lower profile sander x-motion plus for machining plastic edges 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the front profiles of the upper/lower edge for edge thicknesses of 0. 4-3 mm and feed rates up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed ​​12000 rpm, 2x 1. 5 kw • Edge and workpiece thickness measurement using bluetooth technology Extra Information Power supply: 3x400V 50/60Hz Chain feed with 2 gears, Feed rates: 10 and 18 m/min Control Unit x-motion Plus control with 15' SmartTouch

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Blsdpfow Rpd Sex Ap Ioi Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Bledpfey Emrksx Ap Iji

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) Bjdpoyq Sztsfx Ap Ioli All prices quoted are net, plus VAT.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm Bodpfx Ajyi U Elop Ioli • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)