Biomass boiler plant

Biomass boiler plant

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Lhsdpfx Aeyrr Ucokqef Manufacturer: Hermle Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Lhsdpfx Aksd Dhw Nsqsf

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CLX 350 V6 Year of manufacture: 2022 Control: DMG Mori SLIMline Siemens Operate Technical specifications: Maximum turning diameter: 320 mm Distance between centers: 780 mm Bar capacity: max. 65 mm Travels: X-axis travel: 185 mm Y-axis travel: +/- 40 mm Z-axis travel: 465 mm Main spindle: Spindle speed: 5,000 rpm Drive power: 11 / 16.5 kW Sub spindle: Spindle speed: 5,000 rpm Drive power: 12.6 / 16.2 kW Number of tool stations: 12 positions Tool holder: VDI 30 Operating hours: approx. 1,760 h Spindle hours: approx. 1,130 h Technical features & accessories: - Direct path measuring system for X and Y axes - External electronic handwheel - Bar package & interface, includes: - Workpiece pick-up device for parts up to D65 x 200 mm, max. workpiece weight 3 kg - Connection for bar feeder - Chip conveyor with right-side discharge - Four-color signal lamp - Collet chuck, make Hainbuch SPANNTOP nova combi - Differential pressure clamping for the sub spindle - External chuck flushing for the sub spindle - Automatic workpiece ejector, sub spindle with internal coolant supply for chuck flushing - Hydraulic 3-jaw chuck, make SMW BB-D 175 for sub spindle - Coolant system 5 – 20 bar, includes: - High-pressure pump - Double cartridge filter for cooling lubricant - Coolant spray gun 5 bar - Preparation for oil mist separator - Manual tool measurement device - Automatic bar loader, make IEMCA KID80/16 - Partial belt conveyor Lhsdpfx Akjyzbl Rsqsf - Technology cycle “Alternating Speed” - Technology cycle “Y-Axis Parting” - Technology cycle “Easy Tool Monitoring 2.0” Accessories, depicted tools and clamping devices are only included with delivery if specified in the additional information. Subject to change and prior sale. Technical data and information may be subject to errors or modifications.

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Ljdpew Ngipsfx Akqjhf Number of pallets: 2 pcs Pallet size: 1000*800 mm

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary. Lsdpjftdv Ujfx Akqjhf

Condition: ready for operation (used), Year of construction: 2023, number of axes: 9, This 9-axis NAKAMURA-TOME WY150 was manufactured in 2023, featuring a turn-mill centre with a comprehensive toolholder setup including 6 external, 4 internal, 3 radial rotating, and 12 axial rotating holders, plus a collet chuck and a 3-jaw chuck. Consider the opportunity to buy this NAKAMURA-TOME WY150 turn-mill centre. Contact us for more information. Ljdpoyb Sakjfx Akqshf Additional equipment • 6 external toolholders • 4 internal toolholders • 3 radial rotating (driven) toolholders • 12 axial rotating (driven) toolholders • 1 collet chuck • 1 three-jaw chuck

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C Ledpswp Rqfofx Akqehf • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2024, The machine has an electrical connection of 15 kW and a trunk diameter of up to 85 cm. The saw motor is electrically driven and has an 11 kW motor. Lsdpfx Akju Sklmoqjhf

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. Lhsdpfsqy Ek Asx Akqsf - But welding achine SMEI - Wire sharpener SMEI

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Lhsdpsi E Hnyofx Akqjf Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Various pipe penetrations in the area of the lower supporting ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.