Wood crusher

BMR 7,5 KW

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Njdpfxsvdyr No Alaeld

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Nsdpjt Tvk Aofx Alajld Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: used, Holz Her Accura 1556 Premium fully equipped, modern edge banding machine First delivered in 2021 Machine is in EXCELLENT CONDITION Available from stock in Lieboch Njdpoyfndaofx Alaold

Condition: ready for operation (used), Year of construction: 2008, A Mercedes-Benz truck with a closed box body and loading equipment is available. Engine power: 210kW, displacement: 6374cm³, fuel: diesel, vehicle class: 10, emission class: Euro 5, environmental badge: green, max. loading equipment lifting capacity: 2000kg, pollutant group: 4, body type: 6300, mileage: approx. 239000km. Documentation available. The air conditioning system has a leak, but it will be repaired before the sale. An on-site inspection is possible. Nodpfszdkn Rsx Alaeld

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Nledjy Rzbwopfx Alaed Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: excellent (used), Year of construction: 2004, I sell the horizontal wood shredder DI Mechanik SDOP 400/3, Made in Slovakia Year 2004 Cylinder system with 3 knives. Nsdpfx Ajt S Eunjlaold 400x150mm input in the shredder Motor 30KW Productivity apprx 5-7 m3 / hr. Condition like new. Avialable immediately.

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Nlodpszfapmofx Alajd Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: ready for operation (used), functionality: fully functional, operating hours: 15,500 h, load capacity: 5,000 kg, lifting height: 5,100 mm, Equipment: adjustable boom, air conditioning, cabin, head guard, lighting, pallet forks, seat heater, sideshift, trailer coupling, The following is offered: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to operate RX 70-50 4-wheel diesel forklift Used Year of manufacture: 2021 This offer is intended for commercial customers, dealers, public and church institutions only! Unless explicitly stated otherwise, this is a used item. The machine is in working condition with signs of previous use. Njdpfew U D I Hex Alasld Existing defects can be discussed by telephone. FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT Manufacturer: STILL Model: RX 70-50 Mast: Triplex Load capacity: 5,000 kg Lifting height: 5,100 mm Fork positioner 2 pairs of forks (4 forks) Fork length: 240 cm Hours: 15,500 Fork positioner Full cab Overall height: 2,460 mm Please refer to the photos for data. Further industrial trucks available from stock! Inspection is possible on Tuesdays and Thursdays between 9:00 am and 4:00 pm or by prior telephone arrangement. Subject to prior sale, the item can be taken immediately if required. All dimensions are approximate. General notes for all offers: All information is subject to change.

Condition: good (used), Year of construction: 2018, Vehicle description Diesel forklift HYUNDAI 50DA-9 Year 2018 acc. Counter 19.360 hours 5 tons lifting capacity 4.90 meters lifting height 2.48 meters Overall height 75 KW Cummins Euro 5 engine Nledpfor I Adzjx Alajd - Triplex free lift mast - 3rd and 4th circle to fork carriage - Cabin with heating (one door) - lighting system - ready for immediate use - Original paint - Service maintained machine Selling price: 13.500,-- net also favorable delivery possible!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW Nljdpfx Ajy T R I Eolajd • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment • Scraper-type chip conveyor • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Technical Specification Taper Size SK 40