Boge S20 - 2 Screw Compressor

Boge S20 - 2

Condition: excellent (used), Year of construction: 2021, Turning length: 1,500 mm Max. turning diameter: 670 mm Max. main spindle speed: 5,000 rpm Kjdpfjx Nm Uajx Ahysdg Max. sub spindle speed: 5,000 rpm Milling unit tool holder: CAPTO C6 Includes HAINBUCH chuck with quick-change system Includes bar feeder Includes KNOLL chip conveyor / band filter Includes various tools Includes complete documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Kodpsw Rl S Ssfx Ahysdg Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Kdodpfx Ahswk D Efoyog Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation expandable to full gantry crane span approx. 8.5 m Kdsdpfx Ajmdrt Sjhyeg hook paths approx. 6,0 m DEMAG monorail trolley Floor control system

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. Kdodpfxjqhkuks Ahyjg The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement.

Condition: excellent (used), Fixed bed milling machine Zayer model KF 3000 with CNC heindenhain 355, prepared with external computer for cad cam, table 3000mm x 1000mm, travels, longitudinal 2700mm, transverse 1250, vertical 1000mm, rapid advances 15000mm/min, huron iso 50, spindle speed 3 ranges 3000 rpm variable, recently repaired huron head, with change of gear pair and all the bearings of the same head.power 30kw, weight admitted on table 10000kg, machine in good condition, weight of the machine 25tns. Kdedpfjvdv Tcjx Ahyeg

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige In General: Kedpoxv Nkujfx Ahyjdg Year of manufacture:2024 Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Year of manufacture 1997 with floor control Lifting height 3 m Kjdpfjum I Akox Ahysdg Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Kdsdpfx Ajx Ih Dgohyeg

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Kdjdpsu Rptysfx Ahyeg Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions