Tool Milling and Drilling Machine

Deckel Maho MH 700

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Itodsuhbxaopfx Ac Eok EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Iodpfjtu Il Tsx Ac Eotk Honing device Wet sanding device

Condition: used, functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, drive type: Diesel, Wheel loader Condition: Ready for use and fully functional Iodpfxozknuus Ac Eetk Technical condition: normal Description: Wheel loader FIAT - ALLIS - Model 215 - 4x4 wheel loader - Year of manufacture unknown - 3-cylinder FIAT diesel engine, approx. 60 hp - 3 forward gears - 1 reverse gear - Brakes are poor, but functional - Additional hydraulics up to the fork carrier - Engine and transmission are in good condition - Hydraulics are in good condition - INCLUDES bucket and Euro frame for forks. Bulk material bucket, 3rd valve, heater, fully enclosed cab, 2-speed hydrostatic drive

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, machine/vehicle number: 16079, three-jaw chuck diameter: 250 mm, Used conventional lathe DLZ 502 Ijdpfxezlkyij Ac Ejtk The spindle, lead screw, cross slide, and top slide should be replaced. The bed ways are still in very good condition. Accessories: Like-new 3-jaw chuck with boring and soft jaws Faceplate D = 500 mm, various tool holders, centers, steady rest Machine dimensions: Width = 1.1 m x Length = 2.8 m x Height = 1.25 m Weight approx. 1.5 tons Drive power 5.5 kW

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Iodpfx Ajxu I Atec Eotk

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE Iedjuhpiyspfx Ac Eetk - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg Itsdpfx Aed Rxw Hoc Esk

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m Isdpfxewizlto Ac Ejtk - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Iodoytcf Uepfx Ac Estk Accessories exclusive i.D. *

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Itodsxgkncopfx Ac Ejk Technical condition: New Front tire type: Pneumatic Front tire size: 16/70-20 Rear tire type: Pneumatic Rear tire size: 12-16.5 CE certificate,