Center Lathe

OKUMA LS

Condition: used, Rotary vane vacuum pump Oil circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Refurbished Warranty: 12 months Suction capacity: ca.1000m³/h Ultimate pressure: approx. 20 mbar Operating medium: Mineral oil (Inclusive) Delivery time: 2 Wo. Ijdpfxecu Tirs Ab Tshw

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Ihodpfx Ajxdwbkeb Tow Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Ihsdpox Sq Sbofx Ab Tew Manual Feed cutting time 11,436 hours

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Iodovbquijpfx Ab Tjhw Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Ijdpjirax Uofx Ab Tehw -Weight: 1500kg

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Ihedju St S Aspfx Ab Tsw Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm Ijdpfx Abjvbhv Rj Tshw center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device Ijdpfx Ajnqy Haeb Tshw tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, Iodpfsxwyuaex Ab Tjhw 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button Iedpfxox Rt Euo Ab Tehw - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.