Cantilever rack, 6.30m H, 1.20m arms, 900kg

Bruckamp Kragarmregal

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! Ljdpfx Alofivg Rj Tern 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. Lrsdpfx Aloidqr Se Ten TECHNICAL DATA see picture Further data and information on request, we look forward to your call or message!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.70m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! Lrsdpfx Aef Tv T Nsl Tjn 1 shelf unit with 4 stands € 2.255 (net)! Price for transport within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 80 Frame: IPE 180 Shelf stand on one side approx. 3,700mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600 mm 500 kg per arm / 2,700 kg per stand with 4 stands per arm level 4 x 500 kg = 2,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Lrsdpfx Aed Id Ugsl Ton Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: used, Year of construction: 1995, cutting diameter 260 mm Lrodpfx Alowhqxms Tjn saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min feed length 750 mm multiple feeding length 6750 mm height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Lrjdpemhhypsfx Al Tsn According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Lrsdpfx Aeul Shnsl Tjn Adhesive application – dovetail joint in very good condition functionality tested

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Lredpsd Hx Hpjfx Al Ton Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours Lrsdpfst Nfarex Al Ten WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter Lredpfsm Sgvzox Al Ten for finger joint milling machine HK200 and HK400 50 kW