Wheel loader

Case 580 F Radlader + Heckbagger

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Fpjdpjzbqquefx Al Uen Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), mileage: 269,806 km, fuel type: diesel, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, For sale: a special-purpose vehicle for waste collection, a Mercedes-Benz Econic 2633L with a Zoeller garbage truck body. Vehicle specifications: • Make: Mercedes-Benz • Model: Econic 2633L • Year of manufacture: 2013 • VIN: WDB9576611V234571 • Mileage: approx. 269,806 km • Body: Zoeller – garbage truck • Engine: Diesel • Axle configuration: 6x2 Technical condition: The vehicle starts without any problems. The engine runs, but there is a noticeable knocking sound coming from the engine during operation. A possible cause could be damage to the piston, piston pin, or connecting rod. The vehicle is sold as damaged and requires engine diagnostics and repair. Fjdpjzdq R Sjfx Al Uspn The body is complete, and the visual condition matches the photos.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls Fpsdpfx Ajyzim Aol Uon -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Fodpfx Alok Hz Iwe Uspn YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Fodoh Nvyzopfx Al Ujpn

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2001, operating hours: 8,535 h, General information Year of manufacture: 2001 Model year: 2001 Serial number: ADC01183 Technical information Number of cylinders: 6 Empty weight: 20.600 kg Functional Working width: 280 cm Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Fpodpfoztpvxjx Al Ujn Other information Track width: 280 cm

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in Fedpfx Aljy Sf Azj Uopn • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: used, mileage: 731,000 km, first registration: 01/2006, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, Year of construction: 2006, Axle 1: left 12 mm right 12 mm Axle 2: left 12 12 mm right 12 12 mm Fpjdpfx Alozg D U Aj Ujn Axle 3: left mm right mm

Year of construction: 2022, condition: new, Forestry Mulcher // Tree Mulcher Fpedpfx Ajph Rmnjl Ujn The mulcher for large excavators, with GALEN technology The mulcher on the picture is for 20excavators mulches trees up to 30 cm in diameter and comes in working width: 160 cm. It is ideal for handling and removing vegetation in wooded areas, especially for jobs that require a large shredding capacity and speed For detailed information and price, please contact us

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 960 kg, empty load weight: 960 kg, operation weight: 960 kg, maximum load weight: 150 kg, lifting power: 150 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, suspension: steel, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, head guard, hydraulics, rubber tracks, Excavators GT950 Professional GT950 tracked excavator Model GT950 – 960 kg Introducing the compact and highly functional GT950 tracked excavator – the ideal solution for excavation, construction, and installation work in spaces with limited area. Thanks to its own weight of 960 kg and robust construction, the machine offers stability, precision, and comfort, even under challenging terrain conditions. Its small dimensions and a pivoting boom with a turning radius of only 733 mm ensure that the GT950 performs perfectly on narrow plots, in gardens, and on construction sites with limited space. Engine and Reliability The excavator is equipped with a modern Koop 192F engine that meets the Euro 5 standard, which guarantees low fuel consumption and smooth operation. The reversed cylinder on the boom increases durability and safety during intensive use, ensuring long and trouble-free operation of the machine. Fpsdpfx Aezgn Tiel Usn Maneuverability and Stability on Terrain Thanks to the extendable tracks with a width of 180 mm and a solid undercarriage with a width of 950 mm, the GT950 offers excellent stability and grip on uneven terrain. The compact overall dimensions (2650 mm long, 930 mm wide, and 2200 mm high) allow for free maneuvering, even in tight working environments, and the ground clearance of the platform of 380 mm enables trouble-free operation on difficult ground. Excellent Performance The impressive operational capabilities include a maximum digging depth of up to 1680 mm, a maximum digging reach at ground level of 2430 mm, and a digging height of up to 2490 mm. The dumping height of 1760 mm makes it easy to load material, and the minimum digging radius of 1340 mm ensures precise work in a limited space. The blade with a lifting range of up to 175 mm and a lowering range of up to 325 mm further increases the functionality of the machine. Technical specifications Model GT950 Weight 960 kg Engine Koop 192F Euro 5 Bucket width 420 mm Reversed cylinder on the boom Yes Joystick Yes Swing arm Yes Extendable tracks Yes Max. digging reach at ground level 2430 mm Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Minimum turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height of the blade 175 mm Max. penetration depth of the blade 325 mm Overall length 2650 mm Overall height 2200 mm Overall width 930 mm Overall length of the tracks 1100 mm Turning radius of the upper carriage 733 mm Ground clearance of the upper carriage 380 mm Width of the undercarriage 950 mm Width of the track 180 mm Height of the track 320 mm