1995 Comec MMO/5-CL+CA

Comec MMO/5-CL+CA

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Djdpfx Agot Txfpeceup Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: excellent (used), Year of construction: 2011, 5-axis gantry machining center for the production of components for chairs, tables, doors, etc. from wood and MDF Max. useful working area (X-Y-Z) mm: 3550 x 1800 x 750 Spindle power: 2 x 7.5 KW Spindle speed: 2000 - 18000 rpm Equipment: Frame Djdpfexau Uyox Agcsup 2 x movable loading tables 4-spindle head 2 x loading magazines Numerical controller Electrical cabinet Control panel Protective cabin

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Dodpfx Aeufr H Asgcsup

Condition: excellent (used), For sale: Genini brand lathe in very good condition Duedpfxexf Nyus Agcsp

Condition: used, Comec FM0/2000/CA Horizontal drilling machine with loader 6 Horizontal heads + about ten other replacement heads and mandrels (see photo) 4 belt driven motors Dusdpsrkctcofx Agcjp Working length cm. 200

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Dedpevvvr Asfx Agcoup Central lubrication Automatic or manual operation Automatic material loading and discharge Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Unit adjustment range (B and F): + 92° / - 27° Unit angle adjustment (D and H): + 45° / - 20° Unit angle adjustment (E and M): + 45° / - 10° Spindle height adjustment (C and G): + 62° / - 5° Joint height and width adjustment Spindle angle adjustment: 0° - 90° (vertical journal) Cycle speed adjustment

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning 5 stations + 1 output unit for rounding or chamfering Duodsxg Nbuepfx Agcop Total power 43kw 380V

Condition: used, Year of construction: 2003, Double-sided tenoning machine with automatic feeder Technical Features - Production: Up to 2400 pcs per hour - Produccition: very high outputs (2400 tenons / hour) - Speed of the axles portafresas: rpm 9000 - Max. length of the pins at any inclination: mm 100 + 2R - Max. shank depth with standard tool: mm 40 - Min. Shank depth with standard tool: mm 10 - Maximum spike thickener: mm 25 - Power axle carrier motors (nr. 2 of 4HP): HP 8 - Motors for rotation (N. 2): HP 2 - Motor power right group movement: HP 1 Duodsxrc Hzepfx Agcjp

Condition: used, Bacci MOM 90-C A Double mortising machine, horizontal and vertical, automatic, with loader. Dujdpfopph Hwox Agcjp 5 vertical spindles per side 2 horizontal spindles 6 oscillation settings

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Brusa di Garboli TV 65 dowel milling machine Year of manufacture: 1998 Max. milling diameter: 65 mm Min. milling diameter: 15 mm Dsdpfx Ageyl Uqmecjup Number of cutter heads: 1 Min. workpiece length: 350 mm Main motor power: 5.5 kW Max. feed rate: 18.5 m/min CE marking present