Timber dryer

COPCAL

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 1 X sorting unit per 11.5 m Dkedpfxjr A Et Tj Anwol Machine is set up according to your wishes

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; Djdpox Akq Njfx Anwekl - Plant empty, loaded onto truck free of charge.

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) Dsdpfx Anjxnbctewskl - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: like new (used), Manual profile grinder UTMA model P20 Dkedjff H E Rspfx Anwel

Condition: excellent (used), HSS saw grinder VOLLMER model CMS 10M Dkjdpfx Aji Hchdonwol

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Dsdpfx Anjxtxi Ijwskl Available immediately. CE version. Documentation included.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Dodpfoxlqntjx Anwjkl Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Dkjdov Si Szspfx Anwol For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Scrow 32 Dkedpfxsuh U Ize Anwsl Spray weighted 123g

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips Dksdpjr Ak Rgefx Anwel TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg