Tensile testing machines PM5

Darto GmbH PM5

Condition: good (used), Year of construction: 2003, machine/vehicle number: 4N1028, overall weight: 300 kg, total length: 1,400 mm, total height: 1,520 mm, total width: 780 mm, type of input current: AC, input voltage: 230 V, Equipment: type plate available, SPECTRO LAVMC05A SPECTROLAB spark spectrometer, metal analysis device Itodpsvytalsfx Aaaep Input: 230 VAC / 50 Hz Power: 2500 VA

Condition: excellent (used), Testing system for measuring tensile and compressive forces up to 100 kN Manufacturer: Zwick Type: 7045.370.1a Materials testing machine Tensile and compressive forces up to 100 kN PC Software: testXpert testing software Documentation: Basic program for tensile and compression testing Zimt command interpreter Instruction manual Cards & Modules: Zwick ZPS 7095.1 Rev.: d Power supply unit Zwick ZPU 7095.2 Rev.: j Central processing unit Zwick ZAST 7096.4 Rev.: f Drive control unit Sieb & Meyer AC-Servo 26.39.2 AC-Servo module Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Weight: 1140 kg Modernization of the Frank machine 81120 1995 Cost: 113,000 DM Modernization of the universal testing machine with digital measurement and control electronics Additional slots for 3 connection cards Remote control for extended control of the testing machine during setup and test execution Measuring amplifier (TF) for force or analog length change Itsdpfxoqtrkdo Aaaep Connector for voltage measurements (e.g., single strain gauge with preamplifier), without calibration Connector for strain gauge transducers for force or displacement measurement, without calibration Control unit with IEEE 488 bus card ZIMT program for calibrating the force transducers in conjunction with the DK 38 MGT 32 S 71 (0 ... 10 V output) and the Keithly 182 digital multimeter Program sequence: 10 calibration steps under load or unload Files are available in the ASCII file Drive unit for the Frank 81120 AC Motor Resolver with motor plate Find more new and used items in our shop! International shipping costs on request!

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Iedscxxrgopfx Aaaotp surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Year 2011 Condition Excellent Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Itodpfx Aaettlzfoajp Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: new, Year of construction: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin from the year of manufacture 2018. The unit is in its original packaging and is available in our warehouse. You are welcome to arrange an on-site viewing appointment by prior telephone arrangement. Iodel D Ex Dspfx Aaastp

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Iodpoir U H Esfx Aaaetp For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2020, READY TO USE IMMEDIATELY! This degreasing system operates under vacuum with modified alcohol. Degreasing of metal components contaminated with oil and chips from machining. Suitable solvents: modified alcohols Class AIII hydrocarbons (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Lubrication Corrosion protection (spraying) Cartridge filter Very good condition (system has been used very little) 6-month warranty From Service Metalclean AG System processes: spray, immersion, ultrasonic, and vapor degreasing including vacuum drying. Specifications: Basket dimensions: 480 x 320 x 200 mm (h) Maximum load: 50 kg Average batches per hour: up to 5 Iedpfxjhg Ugij Aaaotp System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Connected load: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: used, Year of construction: 2018, operating hours: 3,916 h, functionality: fully functional, machine/vehicle number: 667183, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,096 mm, We are offering a KUKA KR150 R3100 Ultra KRC4 with 9650 working hours Iodpfx Ajqaitvjaastp Also, we are offering to overhaul the robot.

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Isdpfjifgwhox Aaaotp Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve Itsdpfx Aeg Ey Rfeaaep -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.