Machining Centres - 5-Axis

DECKEL MAHO DMU50T

Condition: like new (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (min.): 9,000 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 2,000 h, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The machine is fully complete and ready for immediate use. Supplied with 25 tool holders. Software: Heidenhain 426/430. All manuals and documentation are complete. Csdpjx Rqckefx Agpspt

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopMill, _____ Description: Cpodpfx Aexthpwjgpst Year of manuf. : 2023 Control : Siemens 828D - ShopMill Speed : 10000 rpm Movement X/Y/Z : 350/250/300 mm Spindle: Technology:Directdrive Speed:10.000 rpm Power (max.):7 kW Torque (max.):41 Nm Taper:SK30 Workingtable: Clampingsurface:520 x 300 mm Tabeloading (max.):100 kg In general: Toolmagazine:20 Stations Rapid travers in X/Y/Z:24 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump with 8 bar Workpiecemeasurement:Touch probe, Marposs WRP 45 Toolmeasurement:Probe, Marposs TS30 4.-Axis:Walter TANI 100 NEG with 3-Jaw chuck and Tailstock Oilmistseparation:Mechanical extraction, Reven Setup operations:Electronic Handwheel Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholders

Condition: used, Year of construction: 2001, operating hours: 7,343 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, The DECKEL MAHO DMU 50T machining center is a machine that enables the rapid and precise production of complex components using multiple tools. The machine can use multiple tools in a single cycle, automatically fed to the spindle as needed. A single machine can perform operations such as drilling, milling, threading, and reaming. Control of such a machine is entrusted to CNC control systems, the most efficient control system used in machining. Technical data of the DECKEL MAHO DMU 50T machining center : -Year of construction 2001 -Number of working hours: 7343 -Heidenhain TNC 426/430 control -Axis: X500 Y400 Z400 C and B axis -Table 700x500mm -Spindle speed 20 - 9,000 rpm Cpjdox Nm Tiopfx Agpjt -Tool magazine 16-items -SK40 tool holder

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Cpodpfx Asx D Dukjgpjt This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Cedpstximvsfx Agpept Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Cjdpfxsx Auvvj Agpspt Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Including tool holders and zero point clamping system.

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Cedpfx Aex Aupiogpspt

Condition: used, Year of construction: 2002, functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 520 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 3,150 mm, Turning diameter 520 mm Turning length 3000 mm Control SIN 840 D Siemens Z-axis 3150 mm Feed Z-axis 1 - 40,000 mm/min Rapid traverse Z-axis 40.00 m/min X-axis 600 mm Feed X-axis 1 - 30,000 mm/min Rapid traverse X-axis 30.00 m/min Main spindle S1 Spindle speed range 1 - 3,300 rpm Drive power at 100% load 29.00 kW Spindle nose DIN 55026 - Size A11 Spindle diameter at front bearing 160 mm Csdpfjxadk Dex Agpept Spindle bore 115 mm C-axis 360 x 0.001° Milling spindle S2 Tool holder Capto C6 Infinitely variable speed range 1 - 6,000 rpm Y-axis -100 / +150 mm B-axis -110 / +110° Tool magazine with 100 positions Total power requirement 145 kW Weight of the machine approx. 24 t

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 9,000 rpm, CNC Heidenhain TNC 426 WORKING AREA: Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Rotation: 360° Tilting: -10° / +95° SPINDLE: Spindle speed: 9,000 rpm Power (100% / 40%): 9 / 13 kW Tool taper: SK 40 DIN 69871 AXIS DRIVE: Feed rate X, Y, Z: 10,000 mm/min Rapid traverse X/Y/Z: 12 m/min TABLE: Manual rotary table with tilting axis Clamping surface: 700 x 500 mm Maximum load: 200 kg T-slot distance/size: 63 mm / 14 H7 TOOL CHANGER: Magazine capacity: 16 tools Maximum tool length: 290 mm Maximum tool weight: 6 kg DIMENSIONS AND WEIGHT: Dimensions: 1,783 x 1,647 x 2,534 mm (h) Weight: 3,000 kg Year: 2002 Cpsdpfjxz Axiex Agpjt

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Cpedpfx Aovyr N Segpjt Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Cpjdjxa Eudspfx Agpet Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 11035509414, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL SPECIFICATIONS Travel Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid Traverse & Feed Rates Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Codpexp Nnmefx Agpspt Feed rate X-axis: 10,000 m/min Feed rate Y-axis: 10,000 m/min Feed rate Z-axis: 10,000 m/min Maximum spindle speed: 9,000 rpm Work Table (Rotary table with tilting axis) Table width: 500 mm Table length: 700 mm Table load capacity: 200 kg Tool Holder Diameter: 40 mm Tool length: 290 mm Tool weight: 6,000 g Number of magazine tool holders: 16 MACHINE DETAILS Control: Heidenhain TNC 426 Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,400 mm Electrical Data Total weight: 3,000 kg Input voltage: 400 V Type of power: Three-phase current EQUIPMENT Documentation/manual WNT machine vice (jaw width: 125 mm) Lot of SK 40 tool holders Cutting tools Workshop cabinet with accessories

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 Cpodpexmag Uofx Agpst max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm Cpodpew Ny S Defx Agpet spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Cpsdpfxsxm T I Ej Agpjt Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery.