Bottom block P DH PK DK DC

Demag

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen Kodpex D Rqrefx Ahyjdg • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), There are 26 motors available. Kdjdpfxeikrb Io Ahyeg

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm Kdodpfjx D Nwqjx Ahyjg • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: good (used), Year of construction: 2008, clamping force: 2,000 kN, screw diameter: 50 mm, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 580 mm Ksdeyark Tepfx Ahyedg Distance between tie bars H: 580 mm Type: Horizontal Drive: Hydraulic

Year of construction: 2021, condition: new, Directly available from stock List on request Kedpfsica Amex Ahyjdg 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: good (used), Year of construction: 2010, clamping force: 1,600 kN, Equipment: documentation/manual, Clamping force: 160 t Kdedpoyarfdofx Ahyjg Screw diameter: 40 mm Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Type: Horizontal Drive: Hydraulic

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Kdjdpfx Ahoxcbnloyjg Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Kdsdpfsd Sitkox Ahyeg Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: used, mileage: 221,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Kdsdewwqbyjpfx Ahyog Drive: Wheel Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Screw diameter: 45 mm Kdedpexykw Refx Ahyog Shot weight: 294 g Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Shot volume: 323 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, Electric Motor WWE American Model !! Kedpfxoc Sqvvj Ahyjdg Type WWE250-18-449T 460 60Hz 250 HP (PS) 1790 RPM 282A IP55

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Kdsdpfx Aowk Aw Hehyjg Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1988, arm length 2.200 mm height of hook 2.600 mm weight of the machine ca. 1,8 t weight max. in kg 1000 kg +++++ Please note: Ksdpfx Aeg N Di Rehyedg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads Ksdpfx Ahoh Up Uyoyodg

Condition: used, DEMAG . 20 Euro . Kjdpfx Aoh Hvgxehyodg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++