Palletizing system magnetic cans etc.

die magnetprofis

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Lrsdpfjzfi A Asx Acnen Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Ljdpfxoylc Uye Acnorn Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics Lrsdpfsfiwg Tox Acnjn External dimensions: 1059mm x 1077mm Internal dimensions: 970mm x 975mm

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 1500mm flat Dimensions: approx. 1500 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Lodsgggkpjpfx Acnern Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Condition: good (used), Vacuum filling, metal detection and clipping line Lodpfx Acsw Hluyjnorn

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Lredpfx Aed Dy Ugjcnjn Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! Lredpsfiwf Eofx Acnon The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1064mm x 867mm Internal dimensions: 974mm x 775mm

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Lredpequdivefx Acnon

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Ljdpehh Ay Sjfx Acnorn Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection Ljdpoh Ellzofx Acnjrn 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2023, Welding turntable, container rotating device, 6000 kg load capacity Lrodpfsk Adl Hex Acnon Digital display with foot-operated remote control Diameter from 180 mm to 3500 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable: 200 - 1800 mm/min.

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems Lrsdjwx H E Djpfx Acnen

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Ledpfx Aeyhznhecnorn Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Year of construction: 2021, condition: new, Overband plate magnet from remaining stock / overproduction Manufactured from stainless steel 1.4301, hermetically sealed. For sale: a plate magnet with threaded holes on the back. The magnet can be used as a "police magnet" or to filter out metal contaminants above a conveyor belt. Ring eyelets for suspension are included. Lredpfx Acsfktk Henjn Dimensions of the magnet block: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other dimensions available in stock.

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Lodpfx Ajyhzplocnjrn Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!