Magnetic tape overband magnet shredder

die magnetprofis PEM1200

Year of construction: 2018, condition: as good as new (ex-display), Overband plate magnet Bedpod Dzacsfx Aftjld Version in VA 1.4301 tightly welded 2000 x 1200 x 350mm completely welded housing Ring eyelets for suspension

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. Bedpfx Aovgrh Ueftjld We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Bjdpsd Dy S Refx Aftsld Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Bodpfx Ajk H Ic Usftjld Machine is still in original packaging

Condition: reconditioned (used), Year of construction: 2005, Coupling containers, 30–32 m³, suitable for screw compactors, available for right or left configuration. Used, fully functional coupling containers from €4,000, depending on condition, excluding VAT. Delivery possible. Bledpfx Afsgypd Hetod

Year of construction: 2025, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screen deck system consisting of 1 deck for screening minerals from pre-crushed material Input grain size max.: 0-100 mm - Screen cut grain size 0-30 mm - Capacity approx. 60 m³/h (depending on material) - Material is separated into 2 fractions 0-30 mm and oversize grain - To be mounted on the customer's own impact walls or base frame Technical data:  Screen deck: length = 3,120 mm; width = 1,400 mm o External dimensions: length = 3,300 mm width = 2,050 mm o Screen area 4.6 m², number of shafts 24 pieces o Drive 2 x 4.0 kW geared motors o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) o External lubrication of the bearings, optional central lubrication possible for an extra charge  Color: black RAL 9017 / green RAL 6018 or according to customer specification ( against surcharge) Bsdpsd Rbmkjfx Aftjld Delivery time_ approx. 20 weeks

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Bodpfx Aot S Ny Uoftold Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Bsdpolhqd Rofx Aftold Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Bjdpfxodx Daas Aftsld Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Blodpfx Afjcqvhwoted - available immediately -