Sorting belt Sorting conveyor belt

DIMTER

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm Dwjdpfx Apezryvae Ijc

Condition: new, Ruchser Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.311,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!) Dwodpfjvnh T Nex Ap Isc

Condition: excellent (used), Catalog number 8114 TECHNICAL DATA - Working length of the shelf: 3070 mm - Working width of the shelf: 1030 mm - 4 working stations - Max. thickness of bonded components: 150 mm - Automatic rotation - 6 hydraulic cylinders per working station - 3 pressure plates per working station (from the front) - Overall dimensions (L/W/H): 5200x2450x2600 mm - Weight: approximately 6000 kg ADVANTAGES Dwjdpfxjz Earrj Ap Isc - German-made - 4 working stations - Rotatable - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Dwodpfx Apjzkim Se Ioc Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Djdpfxsvi Hw Ne Ap Iewc Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Dwedpfxoz Dh S Re Ap Ijc Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 1568.14, Technical specifications: Model: OptiCut S75-4 Maximum pusher length : 6300 mm Sawblade diameter : Ø 600 mm Year of construction: 2003 Maximum cross cutting sections : 360 x 30 mm / 240 x 160 mm Rotary current: 400 V / 50 Hz Nominal output: 11 kW Fuse protection: 25 A FRIULMAC 45 degree waste conveyer Dodpfx Ajz Dp D Usp Iswc Outfeed : 1500 mm driven band conveyer Brand new software/control panel /PLC

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Dwsdodmi Nijpfx Ap Ioc Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 300,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg Dwjdpfxozwu Hwj Ap Isc • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: used, Year of construction: 2001, Electrical control cabinet from Dimter, model OptiCut 602R Electrical diagrams are available. Parts lists are available. Djdpfsxp Uxwox Ap Iowc

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Djdpfxehh Dbao Ap Iswc Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Dwodpfxszin Aio Ap Iec Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), General tongue-and-groove joint Working width max. 1660 mm Milling height max. 200 mm Milling motor 14 kW Dsdjzxma Sspfx Ap Iswc A general tongue-and-groove joint can be used to join smaller, panel-like elements together to form a larger panel, or it can be used to create a continuous strand from smaller elements, which is then cut to the required length after the tongue-and-groove joint is formed.

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm Dedpsg D Ugkefx Ap Iswc max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Dsdszuzwqspfx Ap Iowc Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.