Joinery machine

Essetre Techno Multiwall XS

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Kodpfx Ajfw Rt Rjb Tolp Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: 400x250 mm 4 SIDES + EDGE BEVELERS Kedpfjx S E Haox Ab Tslp

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece width (max.): 1,300 mm, workpiece height (max.): 300 mm, Contract manufacturing in the timber sector on a Hundegger CNC system Contract manufacturing in timber construction – prefabricated timber structures, prefabricated houses, and log houses on our Hundegger Robot-Drive 1300 CNC processing center. Ksdpfx Abeykyhue Telp Holzbauzentrum.at ADVANTAGES: - Can be individually adapted to specific requirements - 5-axis saw-slotting-marking unit for increased throughput - Timber sections from 20 x 60 mm up to 300 x 1,300 mm - 6-axis technology = machining of 6 component sides in a single pass - 6-axis technology = use of 24 different tools - 6-axis technology = unprecedented machining possibilities

Condition: good (used), The machine has been overhauled many new parts new cables Kjdpfx Asv Ihdzeb Telp new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Kjdpevvi Tyofx Ab Tolp Storage location: Customer

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Kljdpfswiatiox Ab Top Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: used, Year of construction: 2011, operating hours: 3,440 h, functionality: fully functional, machine/vehicle number: 91, We are offering this very lightly used Krüsi Krüsimatik G1, year of manufacture 2011, with only 3,440 operating hours. The machine is available immediately. Manufacturer: Krüsi Maschinenbau AG OFFER - KRÜSIMATIC by Krüsi G1 5-axis machining centre Wood passage: 420x200 mm 5-axis saw unit 5-axis horizontal milling unit 5-axis vertical milling unit Drilling unit Chain mortising unit Discharge roller table 8 m Discharge roller table 8 m (two units listed) CNC control system with cooling unit Kledpfeyfwbnsx Ab Tep Compressed air tank Includes complete tooling Operating manual 1 used timber machining line from KRÜSI, type Kruesimatic G1 Year built: 2011 Can be used with all common timber construction software such as Catwork, SEMA, Dietrichs, S & S, Nußreiner, etc. 5-axis system with dovetail router Processing from right to left 6-sided machining without having to turn the timber! Weight: 5.5 t BTL interface for office connection or manual input directly at the machine For increased cutting performance, the feed speed is frequency-controlled and optimised for various crosscuts Platform height without floor pit: 920 mm Offcuts and chips fall into a mobile bin included The system only needs to be connected with plugs to the electrical cabinet Max. timber cross-section: 200 mm x 420 mm System set up and ready for demonstration AVAILABLE IMMEDIATELY The complete system fits on a MEGA trailer Located in 8842 Unteriberg and ready for demonstration Dismantling / Transport / Installation Auf der Maur GmbH Machinery transport Sale from location Waagtalstrasse 42, 8842 Unteriberg, as inspected, without warranty or guarantee. Payment due immediately in full upon receipt of invoice, without deduction. The system can only be collected after full payment has been received. As-is sale with no statutory warranty, guarantee or liability of any kind. "All warranty claims, to the extent permitted by law, are excluded. In particular, rescission and reduction are excluded."

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 Kodpfx Ajwf Hw Hob Telp - Current consumption [A]: 130 - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Kedpfxjylc Uys Ab Tjlp Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, For Sale: Prefabricated Reinforced Concrete Structure (Complete Set of Elements) Immediate availability – structure already produced and ready for delivery. All elements can be visited and inspected anytime. We offer a complete set of prefabricated reinforced concrete components suitable for industrial halls, storage buildings, logistics facilities, or similar projects. Building C1: 4431 sqm Building C2: 3076 sqm (extra price 220.000 ) Key Advantages: Immediate handover – all elements are already manufactured. Full technical project for each element included. EU Declaration of Conformity provided. Assembly assistance available on request. Additional Details The structure can be inspected onsite at any time. Ideal for rapid project deployment. All elements stored in optimal conditions. Kjdpfjxxbk Eex Ab Tjlp Transport and loading can be arranged upon request. For pricing, technical drawings, and inspection scheduling, please contact us