Measuring arm

Faro FaroArm Platinum

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm Bljdow Rgcfspfx Akxog turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment Bljdpfxotpnlwj Akxjg 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 Blodpsw Hg Nlsfx Akxog * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Bedpeuthz Tefx Akxslg Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Bljdpfxjdvn E Ue Akxeg Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Bedpoyz Si Tofx Akxjlg Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet Bljdpfoyz Dwcsx Akxjg HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Bodswm Ih Aopfx Akxjlg Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm Blsdpot Hw Nyefx Akxog z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 9,000 h, stroke length: 350 mm, overall weight: 8,300 kg, working width: 3,100 mm, bending force (max.): 100 t, Equipment: CE marking, A ready-to-use TRUMPF TruBend 3100 press brake from 2017, in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. Bledpsybax Ujfx Akxeg The machine features a maximum press force of 100 tons and is equipped with an advanced control system with graphical visualization. It has only 9,000 operating hours on the clock. Extra benefit: upon purchase, we offer one week of training at our facility, ensuring you can start working immediately and efficiently. Key specifications (2017 model): - Press force: 1,000 kN - Bending length: 3,060 mm - Distance between uprights: 3,384 mm - Usable installation height (+extra option): 500 mm - Controlled axes: standard 4 axes (Y1, Y2, X, R) - Backgauge system: fast and precise CNC backgauge - Control system: TRUMPF T3500T with 3D color/graphical visualization Main options and features: - Increased installation height: provides a 500 mm opening for complex/tall components - Tool clamps: hydraulic tool clamping systems for rapid setup - Bending aids: maximum two height-adjustable bending aids (lifting capacity up to 150 kg) for handling large parts - Safety system: BendGuard automatic laser field monitoring - LED lighting: LED work area lighting in front and rear - Software: DXF import for 2D programming We also provide the machine's maintenance history and an overview of replaced parts, such as the BendGuard. The last maintenance was carried out in August 2025. For further information or any questions, feel free to contact us.