AOI

Göpel AdvancedLine

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements Fjdpfjgz H Dhox Am Ejgi o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Fgodpfxswy U Nms Am Esi Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Fedpfx Ameyh N Aas Esgi Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Fodpsudk A Hefx Am Eegi

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone. Fgodoy Axcvjpfx Am Eoi

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Fgedpfx Asylzhljm Eoi

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm Fsdslp U R Dopfx Am Eogi ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Condition: ready for operation (used), An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible. Fsdpfx Amsw Snd Hj Eogi

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 410 mm z-travel 520 mm control Siemens type 840 D Tool changer 30 Pos. spindle taper: ISO 40 spindle turning speed range 40-6000 U/min table surface area 840x420 mm Table load 500 kg spindle power 8,5 kW total power requirement 15 KVA weight of the machine ca. 2,7 t Machine has 4 axes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fgedpfoyqvt Tjx Am Eoi About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Fgedpfxet Hwuis Am Eei