Ultrasonic parts washing unit

Glogar Ultrasonic 1600H

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Drive power: 4 x 132 kW Feed rate up to 150 m/min Gsdewww Iyopfx Ag Tjil

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 5 STILLIG WARIABEL GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW Giedpfxjvtc D To Ag Tsl 6 MOVING SAWS HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY MORE INFO, PICTURES BY E-MAIL..

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Gsdpfxjt D E Aij Ag Teil Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Godpfx Ajumubyog Tsil Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 2008, condition: like new (used), Polytype 8 Colors Printing Cup , Type BDM 691, Year 2008 Colours : 8 colours Maximum output/hour : 36.000 cups/hour Minimum cup diameter : 60 mm Maximum cup diameter : 100 mm Gjdpfjhbdacex Ag Toil Minimum cup height : 35 mm Maximum cup height : 160 mm UV system : Uviterno Pre treatment : Corona, Arcotec Reference : B-21020

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture Gisdpfx Asf Sqfqsg Tol - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be Gedpfxjff Sbis Ag Tsil considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available Gedoiyx Uzjpfx Ag Teil

Year of construction: 1998, condition: like new (used), VAN DAM 568 COM III 8 COLOUR CUP PRINTER Giedpjh Ha I Ejfx Ag Tsl 560 COM III 8 COLOUR CUP PRINTER, the machine is in good condition. The specifications are listed down below. Machine Type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions about the machine or it's specifications you can always contact us.

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved! Giedpfx Aeh Izr Ujg Tel