Combined machine

Griggio Maka KPS 400A

Condition: used, roll diameter 400 mm throat 385 mm workpiece height max. 335 mm cutting speed 25 - 150 m/min table surface area 595 x 595 mm saw band length 3400 x 6-16 x 0.9 mm work height max. 1020 mm voltage 400 V total power requirement 1.5 kW weight of the machine ca. 470 kg Pjdpfoxab A Rsx Ab Uegi dimensions of the machine ca. 950 x 850 x 1920 mm good / well-maintained condition (!!) Equipment: - electro-motoric / robust, vertical band saw machine - continuously adjustable saw blade speed * Adjustment range via handwheel .. 25 - 150 m/min. - continuously adjustable height of the blade guide - continuously adjustable saw blade width - solid work table - machine base frame - control cabinet with main switch

Condition: new, feed pressure 11 bar intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm Pgjdpfx Absvkizgs Usi

Condition: used, operating hours: 20 h, Fuel type: Diesel Podpfeuu Df Dsx Ab Usgi

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop Podod Du T Ijpfx Ab Usgi • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Year of construction: 2022, condition: new, angle: 0° - 90° Pgodpfx Absi Ezr Ns Usi max cutting length: 1370 mm

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Pjdpfx Ajpiarnsb Uogi Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) Pgjdpfxot N Anto Ab Uji - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Pgjdjd H Dr Sjpfx Ab Uoi Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm Pedpjwnbfkefx Ab Ujgi -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm Pgsdoiinm Hspfx Ab Uji speeds: 1400/3500/6000/8000 rpm Instruction manual