Woodturning machine / lathe

Hager HDE 59 BIG

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Godpeftd Uaofx Ahnobn Dimensions (LxWxH) 530 x 380 x 480 mm

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev Gbedpfx Aegyy I Ajhnon rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm Gsdpfx Ahsp E Eglenebn speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm Gedpfx Ahjxtu Ersnjbn 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Gedpfx Ahsk Sat Dsnjbn Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 4.5 m and a belt width of 0.6 m. Possibility of transport. Gbjdpjxgndhjfx Ahnen

Condition: excellent (used), strip width: 6 - 200 mm Gjdpsp E Ed Rjfx Ahnjbn strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Gbodjxnqzxspfx Ahnen Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 130 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Rigid telescopic handler Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: New Front tires type: Pneumatic Front tires size: 12 R Godpfx Aeww N Npohnobn Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 12 R Rear tires condition: 80 - 100% Description: The MT 625 H telescopic loader is designed for use on construction sites for new buildings and for renovations of low-rise buildings. The compact machine, measuring 1.80 m in width and less than 2 m in height, easily fits through doors and maneuvers well on congested job sites. Its turning radius of 3.30 m and three available steering modes ensure excellent maneuverability. This telescopic loader is easy to operate, featuring an ergonomic dashboard and JSM joystick for guaranteed ease of use. The MT 625 H offers a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 HP engine allows for a maximum speed of 25 km/h. Maintenance is simplified thanks to the wide opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and telescopic arm, resulting in increased productivity. 3rd hydraulic valve, full cab, CE certificate,

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, Gjdoxp Hhdspfx Ahnsbn swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.