460 bar 104 lpm High-pressure pump unit

Hammelmann HDP 122

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Working pressure: 440 bar Delivery rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.800x900x1.450 mm Bwedpfx Aohf Ixmecwon weight: approx. 1.230 kg year of construction: 2015 Condition: in very good used condition.

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Bwjdpox Hgl Hjfx Acwen Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Complete Stainless Steel Bwodpfx Acsh Inqiswen

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Bjdpfx Ajdkdi Tocwjwn Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Bwjdpfx Acjirax Uewsn -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Bwodpoifn N Nsfx Acwon Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: used, Pillar drilling machines Bwjdpfx Acob N Ezrewen

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 Bodpjxmagujfx Acwjwn power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Bsdpoibwarofx Acwswn Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Year of construction: 2015, condition: new, Vertical furnace Bjdpfx Acscdi D Dswewn height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C