All Surface Empty Bottle Inspector

HEUFT InLine TI 24 BFS1

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive Nsdpfx Afow U N Ixsuslg - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler Nedpfx Ajvvtpxofuelg With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Nledpfx Afot Akgwsujg Power : 400V/150A/60000W Year of construction : 2000

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Elektrode Ø 0,5-3mm Nsdpfef Hmn Aox Afujlg Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Nljdstrbrqopfx Afuog

Condition: good (used), Technical data are shown on pictures. Nedep N Aq Hepfx Afuolg

Condition: excellent (used), A-4200-Tebel Cheese Vat Cheese Vat, capacity 10.000 L, Alfa Laval - Tebel , Good condition, 1 piece, closed Type with agitator, double jacket, Insulated. Heating jacket on lower half of cylindrical section • Cylinder length: 1.750 mm • Cylinder diameter: 2.860 mm • Internal lighting • Manhole with sliding door on top position • CIP connection • Outflow: 4" Nlodpfx Afoh A Hb Usueg Outflow height: 400 mm Minimum level Weight 2.800 kg (L x W x H): 3.350x3.000x3.200 mm

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing Nodpfju I Hr Usx Afuslg - Siemens S7 control system with touch panel - Operating hours: 725 hours

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Designed to accumulate mash before the packaging operation. The accumulation option allows the entire line to run continuously without stopping, independently of the packaging machine. - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 Stainless steel - Weight: 60 kg - With floating lid - With level indicator Dimensions: Nlsdsiu Hy Tspfx Afujg D - diameter: 565 mm H - total height: 1095 mm h1 - tank height without legs: 845 mm h2 - height of legs: 250 mm

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Nljdpel Hx Rpofx Afujg