CIP plant

Holstein und Kappert

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler Ksdpfot Uzitjx Ak Aona * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2023, condition: ready for operation (used), A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible. Kjdpfxsu Ei Utj Ak Aona

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Ksdpjvcqy Uefx Ak Aena Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - 2016 overhauled and modified Features: - Processes all standard inspections: Knjdpfx Aksukafre Aja sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Condition: good (used), Semi-automatic can seamer for rectangular cans, in good condition. Kedpfjxupygjx Ak Asna

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side Knodpfx Ajx Ac Rbsk Aja ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Condition: new, Year of construction: 2026, Dispensing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Bottle feed via a bottle sorting system or a stainless steel turntable Volumetric filling Underlevel filling possible Adjustable filling nozzles Pumps and filling nozzles made of stainless steel AISI 316 L Knodpfjwpr Tbex Ak Aja Multi-format stars for different bottle diameters Automatic or manual cap application Stepless torque adjustment of the capping Capping system for plastic caps and optionally for aluminum caps Bottle transport via slat chain conveyor (3,000 mm, depending on order) Display control Labelling is optionally possible Built in Rhineland-Palatinate / Germany

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: Ksdpfx Akswny Hgo Aona - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Year of construction: 2016, condition: used, Malt milling with 4-roller grist mill. Additional title: with 4-roller grist mill Capacity: 4 t/h Operation / Control: Siemens Simatic S7-300 Knedpfx Aksw Tmtvj Aea Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Condition: new, Year of construction: 2025, Sleeve packer/film band roller for film wrapping of large products. Including shrinking tunnel. Full automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications: 380V, 21kW; 0.6m³, 6.0bar; max. speed of the machine in neutral: 10 cycles/min; max. product dimensions (mm): W750xH300; machine dimensions (mm): L5060xW1150xH2000; weight (net/gross): 1200/1400kg. Kedpfx Ajv Nl N Dek Aena Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.