Clean air extraction system

Holzkraft RLA 125

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. Bwedpfx Ascnw U Djfxst For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 219 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Bodjh Ucrbjpfx Afxowt Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! Bsdpfx Afjw A Hvdoxewt You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Bodpfxjhpmawj Afxowt Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, Bwsdjyi Efcspfx Afxjt - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar Bwjdpjiz A E Eefx Afxot MARCELS MASCHINEN AG

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Bjdpfx Aocnw T Iofxjwt Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Bwedpfovk Sfbsx Afxet Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Bwodpfx Aszcqxuofxet Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Bjdpfx Afsxbf Rbsxswt Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)