I/O MODULE 32

HOMAG

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Tedpfxjzvnfwe Agveb Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Working area X-axis: approx. 4,760 mm Y-axis: approx. 1,600 mm Machining units Unit carrier: 2 independently movable Main spindles: 2 Power of main spindles: 15 kW each Tool holder: HSK F63 Drilling heads: 2 Tool changer: 2 x 12-position C-axes: available FLEX-5 preparation: available Vacuum technology Automatically positionable vacuum clamps: available Liquid ring vacuum pumps: available Control system Control system: PC85 / woodWOP MACHINE DETAILS Machine data Todpfxszx Anfe Agvjb Manufacturer: HOMAG Model: BOF 712/48/16/AP Machine type: CNC portal machining center with automatic material handling Year of manufacture: 2010 Machine no.: CNC operating time: 17,952.86 h Documented operating hours: 05.10.2023 Condition: used, well-maintained Original documentation: extensive Handling and return conveying system Manufacturer: HOMAG Machine no.: EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveying system Portal handling Vacuum crossbeam Conveying technology

Condition: excellent (used), A) SINGLE SIDE EDGE BANDER (Left) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 20 Panels thickness (min/max) mm 8 - 60 Numerical Control POWER Control PC 22 Spraying unit (Antisticking liquid) Infeed fence, adjustable by N.C. Panels infeed system Pre-milling Unit (vertical joint trimmers) adjustable by N.C. type KAL 300 (Kw 3 x 2) Glueing Unit (P.U.R. Glue + Quick Melt unit) PU 34 / QA 34 Band Pressure zone (adjustable by N.C.) "C" Edge coils supporting unit, N° 6 reels Snipping (endcutting) unit HL 86 Servo (Kw 0,4 x 2) 35 m/min Rough Trimming unit Optimat (Kw 1,5 x 2) Fine Trimming unit ALUKANTE (Kw 0,4 x 2) adjustable by N.C. Spraying Unit (for sliding liquid) Multi Function Unit (Profile contour Trimming unit) FK 13 Servo (Kw 0,4 x 2) Profile edge scraping unit (Multiprofile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) Tedpfxozx Eh Is Agvjb B) Workpieces Return system "LIGMATECH" ZHR 05/L/095

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit Tedpeyzp Akefx Agvjb - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Max feed speed: 26 m/min Todpfx Aolw A D Tjgvjb Distance between dogs: 1000 mm

Condition: excellent (used), Panel Beam Saw - With rear lifting table Tsdozxn Ecspfx Agvsb Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Location: Customer. Tjdpfxjzxf Sys Agvob

Condition: used, machine/vehicle number: 008608, X axis working area: 2500 mm Tjdpfozqz N Sex Agvob Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available -Price: per piece -Weight: 5 kg/piece Tsdpfx Agsb A Nlxeveb

Condition: used, PDF listing included! Extensive spare parts package – HOMAG / Homatic / Industrial Electronics For sale is a comprehensive collection of industrial and machine spare parts, primarily from the HOMAG / Homatic range, supplemented by components from Josting, Ferrocontrol, Heesemann/Kuhnke, Vero, Lenze, Brandt, Kuper and other manufacturers. The package comprises a total of over 500 individual items, offering an interesting selection of spare parts, modules and electronic components – particularly for the maintenance, repair and spare parts supply of older machines and control systems. Included are, among others: HOMAG / Homatic input and output cards PLC controllers and CPU cards PLC and program memory / EPROMs / flash modules Mini controllers and axis processors Servo and axis processors Frequency inverters / converters Encoder drivers Time and counter cards PC control units Control panels, keyboards and terminals VME bus and interface cards Power supplies and DC/DC converters Adapter and graphics modules various machine spare parts and circuit boards components from the Ferrocontrol / Josting range additional modules for HOMAG, Brandt and Heesemann machines The collection is particularly interesting due to the large number of different modules and the partially multiple availability of spare parts. It also includes many older or currently difficult-to-source components, which may be of interest for the repair and continued operation of the corresponding machines. Some of the included part numbers / modules: HOMAG / Homatic 2-083-01-5403/04 – 16 × 24 V output card 2-083-01-5406 – Homatic 16 × 24 V output card 2-083-01-5407 – 24 V NPN HC020 FET output card 2-083-01-5408 – 16 × 24 V output card 2-083-01-5101 – 16E 24 V input card 2-083-01-5105 – 32 × 24 V input card, PNP 2-083-01-5423 – Input/Output card HC010 2-083-01-5004 – CPU transfer RAM / auxiliary memory 2-083-01-6902 – PC control unit 2-083-02-7006 – Axis processor 6809 2-083-02-7010 – Encoder driver 2-083-02-7420 / 7421 – Conversion processors 2-083-02-8000 – Axis processor for 6 axes 2-083-02-8068 – Servo 4-axis 2-083-03-0046 – CPU30 E16-103 2-083-03-0202 – SECO 6×RS232 VME bus and numerous other Homatic modules and control components. Josting / Ferrocontrol Input-80 0990 0741 – Input cards Output-80T 09900762 – Output cards Ferrocontrol ORE-80 circuit boards E² PRGR 0990 0591 EFR 0990690 other control and electronics modules Heesemann / Kuhnke various input and output cards Delay cards CPU cards Power supplies and other machine components Power supplies / power units Vero Monovolt PK60 Tedpfx Agjzw N Sbevjb Vero Trivolt HOMAG / Homatic 5 V / 12 A or 20 A power supplies Schroff Switchpac-Triple power supplies Condition The parts come from an extensive spare parts stock. The condition and functionality may vary depending on the item. A complete technical inspection of all individual parts has not been carried out. The existing list with 513 items can be provided upon request. Due to the large quantity, the collection is preferably offered as a complete package. If you are seriously interested, further information, photos and the complete item list can be provided.