VS-23004 Electric triplex mast forklift Hyster e2.00xl

HYSTER e2.00xl

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 Godsmf Aw Aopfx An Eoui

Condition: excellent (used), Year of construction: 2015, Ziemann 300hl Brewhouse System with Mill Room for sale Year 2015, upgraded in 2020. Capable of 16 Brews per day, due to 2nd Lauter tun added in 2020 Guodpfjtt S Sxsx An Esi Location: UK Get in touch with Indassol for further information and pricing

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks Gujdpfxev Tm Ayj An Eji + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Gedev Raatjpfx An Eoui Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Guodpfeg S Tx Isx An Eji

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides Gjdovh Naqepfx An Ejui - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Thread drill Gsdedk Rgxjpfx An Eeui Pilot and finishing tap R 1 3/4 inch

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) Gjdou Edp Sepfx An Eoui 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Paint finish light blue & light gray

Year of construction: 2002, condition: used, Drum diameter: 682 mm Guodpfsfmqv Usx An Eei Height: 539 mm Max. Filling quantity: 167 kg Max. Speed: 980 min-1 Control cabinet not available, can be ordered directly from Steimel (approx. 8,500 Euro - as of May 2021) Operating instructions available

Condition: used, Year of construction: 2010, x-travel 450 mm y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with Gjdpfxjtqqqme An Eoui 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device