Parts washer, spray washing machine
Glogar CM 13 - 2 Tank

Name: Glogar CM 13 - 2 Tank
Brand: Glogar
Availability: InStock

Year of construction

2026

Condition

Ex-display machine

Location

Linz-Land

Parts washer, spray washing machine Glogar CM 13 - 2 Tank

Machine data

Machine type:: Parts washer, spray washing machine

Manufacturer:: Glogar

Model:: CM 13 - 2 Tank

Year of construction:: 2026

Condition:: as good as new (ex-display)

Operating hours:: 1 h

Price & Location

Location:: Tagerbachstraße 10, 4490, Österreich

Call

Details about the offer

Listing ID:: A18819796

Update:: 13.05.2026

Description

Parts Cleaning System / Spray Cleaning System Type CM13
2-Tank (Washing + Rinsing) including air knife blow-off

Basket Diameter: 1,300 mm (octagonal)
Max. load capacity: 1,000 kg
Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine.
Useful height: 800 mm
Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar
Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar
Total connected load: approx. 52 kW
Control: Siemens S7-1200 with KTP700 touch panel

Including the following features:
+ automatic water refill for both tanks
+ automatic chemical dosing 1-10% (Dosatron)
+ special spray system (can be optionally activated) for small components (= E-spray system)
+ side channel blower with height-adjustable air knife system (blow-off drying)
+ steam extraction including condensate return
+ weekly timer for electric heating
+ pre-configured for retrofitting an oil separator
+ media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing)
+ external cladding with stainless steel sheet
+ complete system fully insulated
+ tanks separated into two modules; fully insulated (different temperatures possible)
+ removable filter baskets in the return flow
+ stainless steel circulation pumps incl. mechanical seal and soft starter

The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.
Codpfx Ahov Tm Aye Ioha

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2016

50 listings online

Call

Send inquiry

Telephone & Fax

+43 7224 ... show

Fax:

These listings may also fit your interest.

Listing

Lathe - cycle controled WEILER E 60 / 2000

Oelde

7,700 km

Lathe - cycle controled
WEILERE 60 / 2000

Call

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm Chedpfx Ajzhcfveh Ija turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

See details

Listing

Tool Room Milling Machine - Universal AVIA FNE 40 NC / TNC 320

Dreieich

7,842 km

Tool Room Milling Machine - Universal
AVIAFNE 40 NC / TNC 320

Call

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min Chjdpfx Ahoyq Sv Ds Ioa power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

See details

Listing

Cleaning system - Top loader Glogar TR450

Linz-Land

8,294 km

Cleaning system - Top loader
GlogarTR450

Call

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug) Csdefbt Sijpfx Ah Ijha

See details

Listing

Parts washing machine for metal parts Glogar L800FP

Linz-Land

8,294 km

Parts washing machine for metal parts
GlogarL800FP

Call

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Chodpfx Aouxuv Aoh Isa

See details

Listing

Linz-Land

8,295 km

Parts washing machine for metal parts
GlogarL800FP

Call

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Chsdpfxohl H Ubj Ah Ioa

See details

Listing

Hydraulic press UMP Technika Metal Briquetting Press

Ukmergė

8,308 km

Hydraulic press
UMP TechnikaMetal Briquetting Press

Call

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Chodpjtmugcofx Ah Ioa Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

See details

Listing

Bar Automatic Lathe - Multi Spindle SCHÜTTE AF42

Germany

7,804 km

Bar Automatic Lathe - Multi Spindle
SCHÜTTEAF42

Call

Listing

Top Loading Parts Washers DOLFIN INDUSTRIAL PARTS WASHING MACHINE LYM1-2-Top loading

Turkey

9,966 km

Top Loading Parts Washers
DOLFIN INDUSTRIAL PARTS WASHING MACHINELYM1-2-Top loading

Call

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Codjv Sa I Tepfx Ah Ieha Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

See details

Listing