CNC work center

INTERMAC MASTER 33

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 Godpfexgtqgjx Aggobi • Cleaning brushes: 4 front and 4 rear

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking and separating laminated glass. SN GG520A-19388 from 2011. Automatic positioning based on optimisation, automatic blade, 2 independent heating element sections, 20mm trimming, laser device for positioning diagonal cuts. Max cut 3700mm, max speed 100m/min, min 2/2 and max 8/8mm. Included: New felt (5mm) on the unloading table, the 520 LAMe-37 has also been serviced. Gbsdpfxjxg Nxyj Aggsi

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Gbodpfxerzazye Aggoi Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

Condition: used, Year of construction: 2004, functionality: fully functional, Glass thickness: 3 ÷ 40 mm Minimum operating height of sanding belt: 50 mm Minimum size of workpiece: 70x70 mm Installed power: 20 kW Minimum compressed air pressure: 6 bar Gbjdpfx Agoxyv Riegoi Max compressed air consumption: 25 Nlt/min Length: 7043 mm Width: 1890 mm Height: 2300 mm Conveyor load capacity: 200 kg/m Weight: 2800 kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l Additional technical data can be provided electronically.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 11 cup wheels vertical glass grindingmachine with higher rack , Gbodpfx Agsxuqdmjgji liquid cerium , water tanks and separate inlet arm permit loadings of large size glass . glass thikness : 3 - 50 mm min. glass size : 40 x 40 mm spoeed : 0,6 - 6 m/min. total working meters : 152000 working video from production on demand . available : from stock .

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Gbedpfx Aow Duvhoggsi

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor Gedpfjl Ikzgox Aggobi * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: good (used), Year of construction: 2010, Straight line edging machine - mitering from 0° to 45°, SCHIATTI Type FPS SME 10, Year 2010 Gjdpswrdfzjfx Aggebi

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: GG520A-17518 & GG502S-16471, total width: 5,100 mm, total length: 5,350 mm, total height: 1,500 mm, overall weight: 3,250 kg, type of input current: three-phase, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Maximum measurement: 3210 mm Minimum measurement: 150 mm Maximum cutting length: 3700 mm Gbedsycgiijpfx Aggoi Minimum cutting length: 250 mm Monolithic: 3–10 mm Laminated: minimum 2+0.38+2 (22-1) maximum 8+4.56+8 (88-12) Maximum glass weight for loading/unloading on arms: 450 kg

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The Bavelloni NRG420 CNC machine can perform the following operations: - Internal and external edges - Drilling - Milling - Writing and engraving with diamond tools Gbodoyabvrspfx Aggji Technical details: - Vector monitoring of speed from 0-12,000 rpm - Lower energy consumption - Reduced noise level - automatic positioning of suction cups - automatic tool measurement - The machine is equipped with 20 tool holders, fitted with a quick clamping system for ISO 40 tool holders with mechanical locking and unlocking by means of a pneumatic cylinder - Multiple tool holders allow over 40 tools to be stored in the magazine - Internal automatic cleaning of the spindle (cone housing) using compressed air - Pneumatic compressed air system to prevent the ingress of dust and liquid - Dual cooling system: directly from the inside of the tool using clean water / externally with circulating water through sprayers located around the tool - The following glass thicknesses can be processed: float glass 3-12 mm / laminated safety glass 6-25.56 mm - Installed power: 37 kW - Electrical supply: 3-phase 400V, 50/60Hz - Control voltage: 24VDC